Stacker

CMC ROBOT 300 PMC

Year of construction: 2012, condition: used, Angle welder with shrink unit, vacuum packing machine, vacuum packing machine, hood shrink machine, hood shrinker, film packing machine Chjdped H Nv Dsfx Ab Tef -electronic temperature control -Max. Pack size: 800 x 600 x 310 mm -Max. Packing weight: 18 kg -Dimensions machine: 1870/1010/H1200 mm -Weight machine: 212 kg

Condition: used, Year of construction: 2016, machine/vehicle number: 1037516, Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Csdpfx Aoq Rx Srsb Tohf On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2008, Ref:10366 . 2008 Horizon SB-09 Line. Comprising; MG-60Ha Gatherer with 6 top-loading, bottom-feeding stations Suction & grip arm feeding from single sheets up to 32pp sections Misfeed & double sheet detection system SB-09 Binder with hand fed station and 9 clamps LCD screen operator console for various functions/set-ups Auto system set-ups for quick make-ready Auto cover score & register Milling & roughing unit with dust extraction Hot-melt spine & side glue unit Pile cover feeder Lay-down delivery belt Specification: Gatherer - sig. size, Max: 330 x 260 mm Min: 148 x 128 mm Binder - book size, Max: 400 x 330 mm manual) Max: 330 x 250 mm auto ) Portrait Min: 148 x 105 mm ) Max: 330 x 320 mm manual) Landscape Min: 135 x 185 mm ) Chedpevwa R Ssfx Ab Tef Book thickness : 1 -- 45 mm Open cover size, Max: 400 x 660 mm Min: 135 x 220 mm Mechanical speed, Max: 4,000 cycles/hr. auto

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F-500, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 200 kg, space requirement height: 1,070 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, year of last overhaul: 2024, input frequency: 50 Hz, empty load weight: 200 kg, cutting length (max.): 530 mm, product width (min.): 530 mm, Electric Punching Machine 530 mm. maximum punching width. Complete with 3:1 punching tools for books. Other punching specifications are available, such as 2:1 and spiral coils. POA. Maximum punching thickness per stroke: 2.5mm. Maximum output: up to 1,000 punching per hour, depending on materials used and skills of the operator. Chjdpfx Aerzuf Dsb Tef Power: 400v 3 phase 50/60 Hz Dimensions: H 1070 x D 710 x L 1100 mm Weight:195 Kg nett

Condition: used, Year of construction: 2008, machine/vehicle number: 1, Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Codpfxjivbbzs Ab Tjhf Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometerAuf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator The machine is in very good condition. Manufactured in 2014. Includes a 3:1 perforation tool, a round hole, and a cutout for the hanger. Manufacturer’s description: Perforation machine with a working width of up to 360 mm Designed for continuous operation and heavy loads The unique „Two-finger” system ensures perfect reception of sheets of varying weights Two-shelf platen feeder enables continuous operation After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Option to use two-piece perforation strips, enabling the perforation of both books and calendars. Perforation up to 2.4 mm in a single cycle. Quick and easy replacement of perforation strips. Option to use strips with or without a cutout for the hanger. Quick format changes by disabling selected needles without having to remove the bar. A jogging device is located on the delivery. 230V power supply Weight: 720 kg Cedpfoxgbc Dsx Ab Tjhf

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 795, working width: 360 mm, input voltage: 380 V, Equipment: documentation/manual, For sale from Norderstedt site due to closure of business Chedpfx Abjtz S D Uo Tsf compact, easy to set up and operate Wire-O closing machine incl. 2 tools

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Chjdpfx Ajh Eibaeb Tjf Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Year of construction: 1999, condition: good (used), Built in: 1999 Capacity (A4 stacks packaged): max 20 - 24 Pakete/min Capacity ( A4 stacks loose): max 16 - 20 Pakete/min Pallet height (incl. pallet): max 1.600 mm Pallet size : max 1.200 - 1.200 mm Size: max 420 x 307 x 320 mm Size: 148 x 110 x 50 mm Equipment: • infeed and buffer section • turntable • infeed table • automatic palletizer • roller track for full pallets Chodedym Srjpfx Ab Tjf • intermediate cardboard slip sheet hopper • pallet dispenser

Condition: new, functionality: fully functional, Year of construction: 2024, The Rotection flow packaging machine is suitable for packaging various products. A big operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Operating display: 10" touchscreen, can be swiveled using the extension arm for comfortable operator handling Drives: Servo Packing length: 900-450mm Packaging width: 35-200 mm (depending on film width) Packing height: 5-80 mm (depending on forming shoulder) Speed: 30-100 bags/min. in continuous operation Speed: up to 60 bags/min. Intermittently Film width: 90-400 mm Consumption: approx. 8 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 800 kg System dimensions: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate: < 5% Print mark sensor: Yes Winding shaft: fixation of the roll by hand without compressed air including roll stop for precise application Roller mount and guide: Overhead Printer holder: possible for an extra charge Chsdpfxjq Ikhhe Ab Tef We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.