Mixer

CIFA BETON MIXER/MALAXEUR/MISCHER 12M3 - STEERING AXLE

Condition: used, axle configuration: 2 axles, first registration: 04/2018, suspension: air, tire size: 425/65r22.5, wheelbase: 1,810 mm, Year of construction: 2017, Applicable material: Concrete Fodpfxeuc Am Io Advspd Tyre size: 425/65r22.5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 8.240 kg Carrying capacity: 30.760 kg GVW: 39.000 kg Make of bodywork: CIFA

Condition: new, Year of construction: 2026, functionality: fully functional, A sandblaster connected to a compressor is an ideal solution for quick, accurate and effective cleaning of various surfaces, eg removing rust, paint, sludge from metal surfaces, such as: automotive parts, engines, fittings, casings, wheels, rims, hinges, etc. As abrasive can be used, among others: sand made of plastic, corundum, quartz, glass, etc. The sandblaster we propose is very well equipped and prepared for work. Machine description The machine is equipped with a proven control system, a solid and roomy chamber with side doors, a solid sandblasting gun, four ceramic nozzles, high-quality work gloves, workspace lighting, a large window - a viewfinder (without a blind spot). The recommended device is provided in addition to a compact construction and a large and spacious workspace, ease of use, reliability and work safety. Dust-free operation of the device is ensured by the use of perimeter gaskets, which allows you to perform work in an environmentally friendly way. The blasting hose was placed in the bottom of the collecting container. The drain hole allows a quick change of material for sandblasting. The advantages of our sandblaster model Complete for use Comfortable sandblasting gun with 4 interchangeable ceramic nozzles Large, stable side door with rubber perimeter gasket for safe and dust-free operation High-quality rubber gloves integrated with the device Venting connection Efficient lighting of the working space 4 pieces of removable protective film for the window, viewfinder Sanding hose located in the bottom of the collecting container Adapted to work with various abrasives The drain hole allows a quick change of material for sandblasting Ease of use, reliability and work safety Technical data Workspace dimension 840x550x370-550 mm Air consumption 400-700 L/min Required air pressure 2,75 - 5,5 BAR Arm hole opening 180 Air connection 1/4" Weight 49 kg Fpsdpfx Asrh Erxodvjd We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: not inspected (used), VERINOX JUNIOR universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking - Steaming Preparation uses: cheese, salami, pasta, confection of vegetables and fruits, drying of meat products, smoking of meat products, animal food, fish, etc. Junior universal ovens are thermally insulated with an expanded material that has high insulating properties, coated with sheets of satin-finish and ribbed AISI 304 stainless steel. The excellent speed and uniformity of the heating up to a maximum of 180°C, an important feature of the JUNIOR, is ensured by stainless steel fans and special shielded heating elements. The JUNIOR oven comes with its own steam production system. Integrated control system. Fpjdpfx Asg H Tldodvod The microprocessor-based control panel is an extremely hi-tech, simple and reliable means of control. Its main features are working temperature and time indicators, an indication of the number of stages in progress, airlock position indicator, commands for setting ventilation, commands for setting stage transition, commands for setting pause and delayed start, memorisation of values and functions in progress. Total external dimensions: W 107 cm x H 100 cm x H 215 cm Interior dimensions: W 97 cm x W 75 cm x H 120 cm Interior dimensions of the lower collector drawer: W 73 cm x W 72 cm x H 25 cm Trolley: 90 cm x 72 cm x120 cm The cell has 2 product probes. Power supply: 380 V, 12 kW For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: Fpedpfod N Sm Djx Adved The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. Chip thickness 15 mm Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg Fpedoinkfnspfx Advod 3-piece cutterhead

Year of construction: 2026, condition: new, Sandblasting cabin for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside 2 large side doors for loading and unloading from both sides, also for longer workpieces Integrated exhaust system with replaceable air filter Control of the air flow via foot pedal 2 blasting guns: one fixed and one freely movable blasting gun 3 separate switches for on/off, suction and cabin lighting 2 fluorescent tubes (230 Volt), in separate housing with protective screen and replaceable protective foil, including 5 spare foils regulation of the working pressure via pressure regulator with manometer Scope of delivery: High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4 / 5 / 6 / 7 mm) Fsdpfx Adecqm Rrovopd Incl. 5 pieces of replacement foils for S

Year of construction: 1969, condition: good (used), Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm Fpedpsidckfjfx Advsd transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: excellent (used), functionality: fully functional, Chocolate Enrobing Machine IKM 220 Enrobing machine Model: IKM 220 with chocolate wheel suitable for all types of pastry and cake Fodpfx Adsxmrcbovepd Wire belt width: 220 mm Continuously adjustable belt speed Mobile machine Power supply: 220 V Approximate dimensions: 1200 x 750 x 1400 mm (W x D x H) Used machine Visit our large showroom!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, type of input current: three-phase, total length: 1,200 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 385 kg, warranty duration: 12 months, product height (max.): 2,000 mm, product width (min.): 1,300 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, NEW NEW Cream cooker CK 200 NEW NEW Efficient operation for cooking and heating creams and masses Precise temperature control up to max. 150°C 2 power levels Digital timer Kettle capacity: 200 liters Batch size: 22 min. – 160 max. liters filling volume Stainless steel construction Manual hand crank for tilting Thermo-oil kettle heating Mobile machine with locking mechanism Exclusive DGUV V3 safety inspection by us With DN80 drain valve Connection: 400V, 18 kW, 32A-CEE plug Dimensions: 1300 x 1200 x 2000 mm (W x D x H) Weight: 350 kg NEW machine & SAB certified With warranty + spare parts service Option: Leasing & rental service Touch Panel LCD Higher capacity heater Maintenance contract Service Package + Commissioning & operator training Fodpov H Tkdofx Advjpd We have a large selection of bakery machines in stock!

Condition: used, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 12/2013, loading space length: 13,350 mm, loading space width: 2,500 mm, loading space height: 2,100 mm, Equipment: ABS, We are very pleased that our offer has captured your interest and can already assure you that you will be able to purchase a good and reasonably priced vehicle with a verifiable service history from us! Rear portal damaged / Roller door GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organise your registration and export documents / EUR 1 certificate and manufacturer’s declaration for export. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE Main inspection (TÜV), accident prevention (UVV LBW), tail lift inspection (LGS), tachograph calibration, installation of on-board units, and full service available through our authorised workshop. Fpedpfoyca Rtex Advod TOLL / ROAD FEES Toll booking possible on site. TRAVEL / DISTANCES Wittlich train station: 500 m audist Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale in accordance with our General Terms and Conditions. The information provided online constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.