Forklift

Caterpillar GP30N **3000kg-SIDESHIFT**

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm Bedeu Nwl Uopfx Al Rowr track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Bjdpfow Iq Umsx Al Rjwr Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), Overall dimensions length 4500 mm width 1900 mm height 1750 mm height of feeder top 860 mm Weight 1100 kg Dimensions of processed raw material height 280 mm width 300 mm length from 500 to 3000 mm Power supply 400 V (3 phase) Feeder feed smooth, controlled by inverter speed 4-13 m/min Bwodsugp Rnspfx Al Rsr Width of the main belt feeder 200 mm Diameter of pulleys 600 mm Blade parameters length 4000 mm width 30 ÷ 42 mm thickness up to 1,1 mm Raw material pressure spring Setting of cutting thickness manual Throughput per hour up to 3 m3

Condition: new, table length 2000 mm table width 1200 mm table height 200 mm bore 28 mm weight 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm Bwsdpfjznngrex Al Rer - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,533 h, Linde H80T-02/900 LPG Forklift Bwsdovkn Dtspfx Al Rjr Year of manufacture 2015 Serial number H2X396F51535 Load capacity 8000kg Own weight 16230kg Solid rubber tyres Duplex mast Lifting height 3500mm Working hours 6533h Power 72kW

Condition: used, Bore diameter: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm Bwsdpfslf I D Ejx Al Ror - like new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar.

Condition: good (used), functionality: fully functional, Radial drilling machine BWF BR40 * 15 speeds * min. speed: 22.4 rpm * max. speed: 2800 rpm T slot table: * Length: 1600mm * Width: 800mm Bedpjviu Nmefx Al Rewr Machine dimensions: * Length: 2500mm * Height: 2800mm * Width: 1000mm

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Bedpfezbcwmex Al Rowr

Condition: new, table length 1500 mm table width 1000 mm table height 200 mm bore 28 mm weight 554 kg Bsdpfjznngfex Al Rewr

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Bwjdpjuxrtfjfx Al Ror Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE