Bulldozer

Caterpillar D7R2

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw Itodpfxov Hzqxo Agwsp 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: yellow, Year of construction: 1979, General information Year of manufacture: 1979 Model year: 1979 Serial number: 20X1733 Technical information Number of cylinders: 6 Drive: Track Empty weight: 14.000 kg Condition General condition: average Technical condition: good Visual appearance: poor Financial information Itedpoun Rlqjfx Agwsp Price: On request Additional information Please contact Ernst van Hek for more information

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1990, machine/vehicle number: 50222, Equipment: cabin, hydraulics, Product Description Used crawler Dozer Manufactured by Komatsu Model D155A-2 Crawler moving type Operates on Diesel Engine Machine sold as its condition Itodpfx Agjumq Dqjwop More information please contact VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: refurbished (used), Year of construction: 1991, Batch mixing, approx. 100 t/h TELTOMAT mix silo with bucket elevator 4 main chambers + additional chamber (total capacity: 160 t) Screening and drying drum 2-shaft compulsory mixer 30,000 l heating oil tanks AMECO filter system 3 bitumen tanks Iodpfotph A Nex Agwstp 2 silos with screw conveyor 4-chamber dosing system

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement Iodpfxsvdld Rj Agwotp - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation

Condition: new, Year of construction: 2025, machine/vehicle number: 650462292, Additional options and accessories Notes MARINI IRON T-BOX 50 MOBILE ASPHALT MIXING PLANT Year of construction: 2021 Operating hours: New - Production capacity: 50 to./h. - CE Certificate - Mobile: 1x sea container 40' HC - Feed hopper: 3 - Capacity: 5 m³ - Drying drum: continuous - Burner: Marini CF 04 with 7,3 MW Itsdjhd Nb Iopfx Agwsp - Mixer: rotating - filter system: 180 m² filter area - control cabin with automatic and manual control system Marini - 1 year warranty Input errors and mistakes in this offer are expressly reserved. Only the concrete agreements in the order confirmation or in the sales contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, ATLAS AB 1302 mobile excavator, used condition, empty weight: 11.8 t Itedpfx Agjw S Ix Rswsp

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Itsdpfxev A Sqhj Agwop Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: ready for operation (used), Cone Crusher Metso / Lokomo Type: G3812 Itedpfx Agou Tlruowjp Mobile type lokotrack 1200 Weight appr. 39 Ton.

Year of construction: 2010, operating hours: 13,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ABI TM 14/17 V Year 2010 CAT Engine / 470 kW Base carrier : Sennebogen SR 35 T Itedpfxjh Tyylo Agwep Aux Winch Vibrator MRZV 24VV Pre drilling rotary available Good working condition!