Star sieve ESS

Butzer - EVR ESS

Year of construction: 2026, condition: new, machine/vehicle number: Neumaschine auf Bestellung, Description: - Screening system consisting of 1 deck for separating minerals from pre-crushed material. Maximum input particle size: 0-100 mm. - Screening cut size: 0-30 mm. - Capacity: approx. 60 m³/h (material-dependent). - Material separation into 2 fractions: 0-30 mm and oversize. - To be mounted on customer-supplied impact plates or a subframe. Technical Data:  Screening deck: Length = 3,120 mm; Width = 1,400 mm o External dimensions: Length = 3,300 mm; Width = 2,050 mm o Screening area: 4.6 m², Number of shafts: 24 pcs. o Drive: 2 x 4.0 kW geared motors o Screening body: Polyurethane (star screen) D 166 / 12 fingers o Screening shafts as a plug-in system (adaptation to other particle sizes is easy and cost-effective) Laoded Rbmkjpfx Anuec o Bearing lubrication positioned externally; optional central lubrication system available for an extra charge.  Color: black RAL 9017 / green RAL 6018 or according to customer specifications (for an extra charge). Delivery time: approx. 20 weeks.

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m Ljdpfx Aevm Upnjnueac -profiled belt- SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts

Year of construction: 2026, condition: new, machine/vehicle number: neu, Description:  Screening machine on hook lift with chassis for on-site transport  Screening into 2 fractions: 0-12 mm and oversize greater than 12 mm  Throughput capacity greater than 80 m³/h (material-dependent) Film separation via separation chamber and extraction fan Conveyor fan positioned beside the machine  Discharge belt, hydraulically foldable  Central control cabinet with networking option to existing machines (emergency stop)  Ljdpfx Aod Rbyhenusac Technical data:  Transport width: 2,500 mm  Transport height: 2,700 mm  Transport length: 7,800 mm  Screen deck: Area length = 4,240 mm; width = 1,200 mm o Screen area 5.4 m², number of shafts 32 o Drive: 2 x 7.5 kW geared motors, speed-controlled (frequency inverter) o Screen body: Polyurethane (star screen) o Screen shafts as plug-in system (adaptation to other grain sizes is easy and cost-effective) o Central lubrication of the screen deck bearings (64 lubrication points)  Hopper: Capacity approximately 3 m³ o Drive: 2.2 kW geared motors, speed-controlled (frequency inverter)  The A-belt and oversize belt are assembled on-site using a plug-in system o Total power: 26.5 kW o Hydraulics: via 24 V battery with integrated charger  Color: black RAL 9017 / green RAL 6018 or according to customer specifications Description:  Conveyor fan for extracting and discharging floating plastic films on the screen deck (maximum part size L = 1,000 mm)  Suction hose D 300 mm  Pressure hose D 350 mm  Fan in frame positioned beside the screening machine with attachment points and forklift tines  Control cabinet with ABB 15 kW frequency inverter, control unit located externally (control cabinet door)  Networking option to existing machines (emergency stop) Delivery time approximately 25 weeks.

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips.  Input material: 0-200 mm  Capacity: approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversized fraction  To be mounted on customer-owned impact plates or a substructure Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers Lodpjg I Uqfjfx Anujac o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes) o Bearing lubrication positioned externally; optional central lubrication available at an extra cost

Condition: excellent (used), Year of construction: 2020, operating hours: 750 h, functionality: fully functional, overall weight: 12,500 kg, Model: Star Screen Zeta Star 75DK Year of Manufacture: 2020 Condition: Used Ledpexnbddefx Anujac Functionality: Fully operational Operating Hours: approx. 400h Power: 75 kW Drive: Perkins diesel engine Speed: Infinitely variable LxWxH (Deployed): 11,780mm x 8,100mm x 3,600mm LxWxH (Folded): 7,980mm x 2,490mm x 2,765mm Weight: 12.5 t - Crawler chassis max. 1.5 km/h - Feed hopper - Radio remote control - Discharge conveyor for finished material, B=650mm, height-adjustable max. 2.6m - Discharge conveyor for oversize material, swiveling discharge belt, B=800mm, height-adjustable max. 3.7m

Year of construction: 2025, condition: new, machine/vehicle number: Neu, Description:  Screening system consisting of 1 screen deck for separating green waste / biomass with a particle size of 0-80 mm.  Capacity up to 150 m³/h (material-dependent).  Material separation into 2 fractions: 0-80 mm and oversize.  Screen deck with enclosure and extraction for film particles.  Extraction point is adjustable.  Suction and conveying fan positioned beside the unit in a frame, with a hose diameter of 300/350 mm. Technical data: Laeded Rbnqspfx Anusc  Screen deck 1: Screen deck area, length = 6,360 mm; width = 1,215 mm o External dimensions: length = 6,690 mm; width = 1,850 mm o Screen area 5.1 m², number of shafts 24 o Drive: 2 x 7.5 kW geared motors o Screen body: polyurethane (star screen) D 340/9 fingers o Screen shafts as a plug-in system (adaptation to other particle sizes is easy and cost-effective) o Bearing lubrication via central lubrication system 24V (without control; must be integrated into the system control).  Suction and conveying fan o Drive: 1 x 15 kW (optional control via frequency converter; not recommended as part of the offer). o Optional: with knife attachment. Delivery time approx. 18 to 20 weeks.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: ESS B2 - *M 0--.10*, Mobile starscreen on trolley Suitable for material: soil, compost, topsoil, wood chips, building rubble, bark mulch Weight: 2700 kg Grain size: 12 to 40 mm (according to material requirements) Power supply: 3 phases, 400V, current 32A, frequency 50Hz, total power 11,25kW throughput: 40 to 60 m³/h depending on material and grain size Delivery time after order approx. 14 weeks Lasdpfjirnrpjx Anusc

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Laedpfx Ajxx Tigjnuec Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Year of construction: 2025, condition: new, Screening deck system consisting of 1 deck for screening of waste wood grain size 0-25 mm capacity approx. 80 m³/h (depending on material) material separation in 2 fractions 0-25 mm and oversize Screening deck with enclosure for suction system upstream acceleration belt with screen deck screwed to one unit +++ Technical data +++ Screen deck 1: Screen deck area length = 4,540 mm; width = 1,215 mm Outer dimensions : length = 4.820 mm width = 1.850 mm Screening area 5,1 m², number of shafts 34 pcs. drive 2 x 5,5 kW gear motors Screen body polyurethane (star screen) D 166 / 12 fingers Screen shafts as plug-in system (adaptation to other grain sizes easily and cost-efficiently possible) Lubrication of bearings placed outside, optional central lubrication possible at extra cost Enclosure 2 mm plates screwed together +++ Acceleration belt +++ drive 1 x 2,2 kW gear motors Ljdpfx Anjd Rbngjujac belt width 1.200 mm belt length approx.3.000 mm Outer dimensions : length = 3.500 mm width = 1.400 mm Delivery time approx. 25 weeks

Year of construction: 2025, condition: new, machine/vehicle number: ESS T2 - *M 0--.10*, Mobile starscreen on trolley Suitable for material: soil, compost, topsoil, wood chips, building rubble, bark mulch Weight: 3500 kg Grain size: 12 to 40 mm (according to material requirements) Power supply: 3 phases, 400V, current 32A, frequency 50Hz, total power 11,25kW throughput: 40 to 60 m³/h depending on material and grain size Delivery time after order approx. 16 weeks Lajdpfx Aod Nytusnuec

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually Ljdjwhy T Tspfx Anuoac - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm  Capacity approx. 80 m³/h (material-dependent) Laedpfx Anog I Uqieuec  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) o Bearing lubrication located externally, optional central lubrication system available at an extra cost Delivery time approx. 16 to 18 weeks.