Extruder PLK 100 single screw

Buss PLK 100

Condition: used, operating hours: 20 h, Fuel type: Diesel Hjdjuu Df Dopfx Agfoff

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. Hedpfxew Iu T Ts Agfeff • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Hedpfx Agswm Ii Tsfsff Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Hsdpeu Rp Hmsfx Agfoff

Year of construction: 2003, condition: excellent (used), Used Loire 2000ton hydraulic H frame press for sale Table dimensions ( x-y/mm) : 5000×2500 Slide dimensions ( x-y/mm) :5000×2500 Stroke ( x/mm) : 1700 Light at tdc ( x/mm) :2700 Lateral window ( x/mm) : 2900 Cushion in the slide (x/mm) : 3400×1900 Stroke of the cushion in the slide (x/mm) :150 Cushion stroke ( x/mm) : 400 Cushion power ( ton) : 600 Lateral moving bloster Brand Loire Power 2000 Ton Table dimensions X-Y 5000 x 2500 Slide dimensions (x-y) 5000×2500 Stroke 1700 Light at tdc 2700 Hfsdpfen Sma Hjx Agfjf Shut eight 1000 Lateral window Lateral window dimensions (x-y/mm) 2900 Internal slide Dimensions X-Y 3400×1900 Stroke 150 Work speed to 100% 22 mm/sec Strokes/min 37 mm/sec Strokes/min 400 mm/sec Strokes/min 350 mm/sec Cushion Power 600 Ton Stroke 400 mm Cushion table dimensions (x-y) 37001900 Accessories Accessories lateral moving bolster Overall dimensions Weight 310 Front 6250 Deep 5000 Height 9650 Conditions Machine conditions Working Electric plant conditions Working Year 2003 New hydraulic H frame press for sale complete with warranty

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. The extruder was used for powder coatings Hfjdpjvcyk Nofx Agfof

Condition: good (used), Year of construction: 2010, Water chiller Hjdporc E Tmofx Agfsff - Manufacturer: 7AIR - Type: SKG - 7,1 SPEZ - Coolant: R 134a

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. Hfodpfx Aemgadpegfsf – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Hfjdpfxowv Umqs Agfof

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. Hodpfx Agouakzzofjff This is not included in the offer price.