Low loader

Broshuis 3+7 ABSD SL / EXTENDABLE

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks Nedsrgzv Njpfx Amyold

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators Nodefn Tviepfx Amyold ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,000 kg, permissible axle load (axle 2): 11,000 kg, permissible axle load (axle 3): 11,000 kg, loading space length: 15,500 mm, loading space width: 2,740 mm, loading space height: 1,050 mm, total length: 15,500 mm, total width: 2,740 mm, suspension: hydraulics, tire size: 245/ 70R17.5 | load index 146/146F, color: blue, Year of construction: 2003, Color: Blue Nodpfx Aev E Rchomyjld Load capacity: 73,500 kg Extendable Main Features Manufacturer: Nooteboom Type: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000030000456 Year: 2003 Weights/Loading Capacity King-pin load: 27,500 kg Axle load: 11,000 kg Total axle load: 66,000 kg GVW: 93,500 kg Empty weight: 20,200 kg Loading capacity: 73,500 kg Axles Brand axles: SAF Hydraulic suspension First axle rigid Axles 2 – 6 hydraulic steering High low valve WABCO braking system with EBS Tires: 245 / 70 R17.5 | load index 146/146F Dimensions Length: 15,505 mm Extensions: +8,800 mm + 8,800 mm Max extended length: 31,105 mm Loading floor length: 11,520 mm Maximum loading floor length: 29,120 mm Loading floor width: 2,740 mm Height: 1,050 mm Additional Information NATO plug Hydraulic operated Gooseneck Outriggers Double extendable Lashing rings Manual landing gear Electro hydraulic pump for trailer functions Rear bumper with lights King-pin 3.5” Central greasing with 2 pumps = Further Information = General Information Year of construction: 2003 Axle Configuration Tire size: 245/70R17.5 | load index 146/146F Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: Twin tires; Max. axle load: 11,000 kg Rear axle 2: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 3: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 6: Twin tires; Max. axle load: 11,000 kg; Steerable Weights Empty weight: 20,200 kg Payload: 73,299 kg GVW: 93,500 kg Functional Loading floor height: 105 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Load capacity: 100,250 kg Weights: King-pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Brand Axles: BPW ECO PLUS Hydraulic suspension 7-axle steering (Axle 2 rigid) First two axles liftable Drum brakes Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Nodpfx Ajuu E Tiomyeld Load index 143/141J Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information NATO plug Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro-hydraulic pump for trailer functions Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central lubrication Lashing rings Wooden loading floor Marker boards for oversize load Remote control = Further information = General information Year of construction: 2024 Axle configuration Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: hydraulic suspension Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 3: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 4: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 5: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 6: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 7: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 8: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Weights Empty weight: 33,750 kg Load capacity: 100,250 kg GVW: 134,000 kg Functional Loading platform height: 105 cm Extendable platform: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: used, Year of construction: 1990, -1- used drive roller/deflection roller, drum length approx. 750 mm, drum diameter approx. 400 mm, with 20 kW Stiebel (5042.04.00301.05) gearbox, year not known to us. Price EXW Nodpjwqfzhsfx Amyeld

Condition: used, axle configuration: 3 axles, first registration: 06/2007, loading space length: 9,230 mm, loading space width: 2,520 mm, loading space height: 910 mm, total length: 13,840 mm, total width: 2,540 mm, total height: 1,600 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 7,950 mm, color: red, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - Toolbox - Central lubrication system = Notes = Trailer coupling height: 98 cm. Total length: 1353 cm + 670 cm + 670 cm. Loading bed: 923 cm + 670 cm + 670 cm. Loading height: 93 cm / 91 cm when loaded. SAF axle 3 x forced steering. Remote steering with cable. = Further Information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual wheels; steered; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Rear axle 2: Dual wheels; steered; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 3: Dual wheels; steered; Tire tread left inner: 45%; Tire tread left outer: 45%; Tire tread right inner: 45%; Tire tread right outer: 45% Weights Unladen weight: 14,440 kg Payload: 33,560 kg Gross vehicle weight: 48,000 kg Nedpfx Asycb I Temyeld Financial Information Price: On request Identification Type number: MCO-48-03V / 2 x EXTENDABLE - 27 = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information, however, no rights can be derived from the listed texts.

Condition: used, axle configuration: > 3 axles, first registration: 02/1997, suspension: hydraulics, tire size: 245/70R17.5, wheelbase: 10,670 mm, color: red, Year of construction: 1997, Equipment: ABS, Nooteboom MCO 58-04V 4 x steering axles. 2 x Extendable: 1,340 cm. BPW Axles. Distance from kingpin to end of trailer: 1,200 - 2,540 cm. = Additional Information = Axle configuration Nsdpfjw Dtlhjx Amyold Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Steering; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70% Rear axle 2: Twin tyres; Steering; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Rear axle 3: Twin tyres; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80% Rear axle 4: Twin tyres; Steering; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20% Weights Unladen weight: 15,980 kg Payload: 38,020 kg Gross vehicle weight: 54,000 kg Identification Type number: MCO-58-04V / 2 x EXTENDABLE / ST = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive to the best of our ability to provide correct information, but no rights may be derived from the above text.

Condition: new, loading space length: 8,000 mm, loading space width: 1,350 mm, loading space height: 450 mm, color: red, Year of construction: 2024, Color: Red Manufacturer: Goldhofer Type: Crawler deck / Spinebed BB 450 A Chassis number: 2100788 Year: 2024 – NEW/ Unused General Extendable, from 8,000 mm to 13,000 mm Payload capacity 100t / 120t in combination 4+6 Design height 450 mm; length 8,000 mm, width 1,350 mm Extendible in steps of 500 mm At the rear, lashing coupling for connection to THP bogies At the front, claw couplings for connection to a gooseneck or claw coupling adapter Integrated supply lines for hydraulics, brakes, and electrics with connection couplings Weight approx. 14,400 kg Loading security 1 pair of lashing rings (LC = 30,000 daN) in the rear coupling head 8 pairs of lashing rings (LC = 20,000 daN) arranged on the outside of the outer beam Side extensions Fold-out outriggers and inserts on the outer beam (basic length) Fold-out side extensions and mattresses on the inner tube 1 x Quick coupling adapter THP/SL To connect the coupling claws of a deck to coupling lashes of a modular bogie or a gooseneck Deadweight 1,600 kg 1 x Drive-on wedge for excavator deck in steel execution (4 pieces) Weight 360 kg = Further Information = General Information Year of construction: 2024 Weights Unladen weight: 14,400 kg Payload: 120,000 kg GVW: 134,400 kg Functional Loading platform height: 45 cm Extendable platform: Yes Condition Overall condition: very good Technical condition: very good Nlodpfxovnb Nwe Amyjd Optical condition: very good Financial Information Price: On request

Condition: used, Year of construction: 2014, Production country: NL Please contact Theo Lelie for more information Broshuis 7ABSD 7 axle semi / stepframe lowloader 07-2014 Hydraulic suspension 245/70R17.5 tyres Last 6 axles Hydraulic steert Extra remote steering (radio control) First 2 Axle’s are lift axles Nodpfoyrtnqex Amyeld Hydraulic Gooseneck Its own 24V electro-hydraulic powerpack Loadingfloorlenght 11.900 mm + 9.000 mm + 8.800 mm extendible Total length 16.350 mm + 9.000 mm + 8.800 mm till 34.150 mm Width 2.730 Weights in kg 7 x 12.300 kg axle load 30.000 kg fifth wheel load 116.100 kg total weight Ca 26.320 kg own weight Ca 89.780 kg loading capacity ABS

Condition: used, loading space length: 190,000 mm, loading space width: 30,000 mm, loading space height: 8,150 mm, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Extendable Low Loader for Railcar Transport Approval Technical Data 1 Speed: 80km/h 65km/h Fifth-Wheel Load: 23,000kg 26,000kg Rear Axle Load: 10,000kg 11,000kg Total Weight: 83,000kg 92,000kg Payload: 52,500kg 61,500kg Unladen Weight (without accessories): 30,500kg Gooseneck: Length: 4,000mm Width: 2,480mm Construction Height: 235mm Fifth-Wheel Height: 1,350mm Front Underride Protection: 1,420mm Rear Underride Protection: 2,700mm King Pin: 3.5 inch Taper: Beveled 10 degrees Front Corners: Beveled 45 degrees Flooring: 50mm spruce Landing Legs: mechanical Width with sideboards: 2,550mm Hydraulic STZ gooseneck with externally mounted beams, hydraulically raisable and lowerable, with mechanical drop-leg supports and hydraulic support cylinders. Hydromechanical forced steering (2-circuit steering system) in low-profile design (construction height 235mm) with adjustable guide elements and THP steering cylinders. Loading Platform: Type: Flatbed Adjustable Height: No Length: 13,000mm Width: 3,000mm Flooring: Steel/spruce 50mm Wheel Wells: No Wide Extensions: No Extendable: Single-stage telescopic First section length: 10,000mm Loading heights (loaded): Loading height 1: 815mm Telescopic loading platform, designed as a combination of outer and inner tube construction, with a fixed 1,070mm long front platform section. Integrated pin-eye coupling in the fixed platform section for connecting vessel bridge extension beams. The welded angle-section rails serve as a running track for rails with gauges of 1,000mm (rail distance 1,015mm) and 1,435mm (rail distance 1,450mm). Locking of the extension stages by spring-loaded cylinders and conical bushings. Platform height on the center tube (outer tube): approx. 815mm (+/- 130mm) Nedpfx Ajyfvypjmyold Platform height on the embedded rail elements: approx. 790mm (+/- 130mm) Rear Undercarriage: Chassis type: Standard Loaded height: 815mm Width: 3,000mm Wheelbase: 1,360mm Flooring: Steel plate Wide extensions: No Wheel wells: No Excavator trough: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Offset stub axles Axle leveling: hydraulic Axle manufacturer: BPW/Eco Operating modes: 1 Axle lift (1) +/-: 130/130mm Axle lift (2) +/-: 0/0mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift airbag Steering: Number of steered axles: 6 Steered axle arrangement: all steered Max. steering angle: 45° Steering type: Hydraulic, 2-circuit system Tyres: Size: 235/75 R 17.5 143/141 J Type: twin wheels Rim type: disc Rim centering: hub-centered Braking system code: According to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes With ABS delete: No Parking brake: Spring-actuated EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis remarks: Steering designed for extended condition with greater steering angle for the front axles Open wheel cutouts above the wheels with narrow transverse beams in between (ALU covers see below accessories) Control elements protected, located on the left in the direction of travel...