Pneumatic cylinders

Bosch 0 822 224 004

Year of construction: 2022, condition: new, No. 04320 Edge grinding machine VOLPATO LVO 150 T New machine, 100% made in ITALY Dodpfx Abeia N Nxo Tjcr Year of construction 2022 Immediately available from stock Combined edge sanding machine with multiple work options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be swiveled up to 45° from the vertical, every angle in between is continuously adjustable. In the basic setting, designed as a 1-station solid sanding machine, it can be converted in a very short time for precise veneer sanding using the veneer edge sanding device included in the scope of delivery. Thanks to the 1-place solution, the machine can also be set up against a wall to save space. The basic equipment includes a 5-part set of grinding wheels (Ø 25-30-35-40-45-50 mm). By using different belt grains, you can achieve different surface finishes and degrees of wood removal. Belt dimensions 2640 mm Abrasive belt width 150 mm Working table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Motor for oscillation 0.15 kW Diameter driven roller Ø 75 mm Additional work table 350 x 300 mm Sanding rolls Ø 25 – 30 – 35 – 40 – 45 – 50 Swing stroke 15 mm Diameter dust hood Ø 100 mm Including operating instructions in English Including confirmation of compliance with CE standards Other scope of delivery as shown Terms of delivery: from stock Transport dimensions approx. 1650 x 1100 x 1350 mm LWH Weight approx. 250 kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale The manufacturer's warranty regulations apply to new machines

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: Djdpfxeuxqzus Ab Tecr - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Dcodpfx Abog Rn Iaj Tjr Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Dcedstnf Iuspfx Ab Tor

Condition: excellent (used), Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Djdpfjxd Rl Njx Ab Tocr Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg Dodpfx Aewz Hygjb Tjcr

Condition: new, Used machine Year of manufacture: 1988 Condition: well-maintained Technical specifications: Dcodpfsxzl Aqex Ab Ter - Length of work tables: 1440 mm - Total width of both work tables: 710 mm - Work table tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillating unit: 125 mm - Weight: 490 kg - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Availability: short-term Storage location: Baden-Württemberg

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul Dcsdpfxot Dxwae Ab Tjr - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Djdsxlqutspfx Ab Tecr Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: used, Year of construction: 2002, total length: 2,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 700 kg, space requirement width: 1,000 mm, space requirement height: 1,600 mm, space requirement length: 2,600 mm, power: 6.5 kW (8.84 HP), No. 04503 Edge processing machine Rehnen KBA Used, year of construction 2002 The machine has been designed for sanding edges, milling profiles and sanding profiles in a throughfeed process. The materials to be processed are solid wood, chipboard and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding unit Sanding belt dimensions 150 x 1500 mm Oscillation path 30 mm Contact roller and sanding pad - Milling unit top - Milling unit bottom - Profile sanding unit top Incl. technical documentation Transport dimensions approx. 2600 x 1000 x 1600 mm LWH Weight approx. 700 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Dcsdpsxzu Iisfx Ab Tor Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse