Tipper semitrailer

BENALU Kipper ALU / 52 Kubik / Kombitür Tür+Klappe

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Duodpfx Aotnhp Refkop Net weight (kg): 41.500

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2 Dodegryl Aopfx Afkoup

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm Duedpeu Ib Drofx Afkep throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. As an option we can offer used machines for your requirements. Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery Dedpfx Afeqlbpgskoup

Condition: used, Year of construction: 2008, pressure 180 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 210 ltr. operating pressure max. 240 bar control DELEM Duodpfx Afjxa Hivjkjp total power requirement 15.0 kW weight of the machine ca. 11.200 kg. range L-W-H 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model “DA 66W” * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality LCD screen (TFT) * Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) * with 2x manually adjustable stop fingers - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder - 2x front, sliding support arms (“sliding” system) - Side guard (swivel doors) - Rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm Dedeuiz I Djpfx Afkjup stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Dujdpfsxlcp Nex Afkop Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, pressure 150 t chamfer lenght 4300 mm distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm Dedov S Iryopfx Afkjup table height 920 mm Control DELEM DA 52 total power requirement 11 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control - Electric backgauge (X-axis) - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard - Foot switch

Condition: good (used), Year of construction: 1990, Rolled metal uncoiling, cutting and coiling line LTs. Line 1300mm/3mm. for precise cutting. For uncoiling, cutting metal, cutting into smaller rolls, coiling into small rolls. The line was bought new, owned by one owner, serviced on time by LTs representatives. The machine is connected and can be tested at any time in Vilnius, Lithuania. The LTs 1300/3 cutting line consists of: Uncoiling decoiler Multi-blade scissors Stop and cut-off segment Spinner with separator Trolley Duedpfx Afopbwapeksp Wardrobe with control panel Technical specifications: Metal width: 1250 mm. Thickness: 700 mm. Diameter min.: 508 mm. Diameter max.: 620 mm. Outer circle diameter: 1200 mm. Maximum weight: 7 T. Width of cut strips min.: 75 mm. Cut tape max. width: 1250 mm. Supply voltage: 3 x 380 V. Power: 18 kW. Made in: Poland Year: 1990 If you have more questions, welcome.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 4,175 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle motor power: 8,500 W, spindle speed (max.): 24,000 rpm, ZC 4035 3,5 Axis Aluminum Machining Center - Robust mechanical structure suitable for high speed - Axis speeds with an average of 95 m/d - Profiling length 4175 mm - Machinable profile section size 300 x 300 mm - Number of clamps 6 pieces - Spindle motor 8.5 kW 24,000 rpm Dedpfx Aowfyuxsfkjup - The number of magazine sets is 8 - Ø 200 mm saw- Mitsubishi PLC control unit - Vices positioned by the X-axis - Automatic tool recovery in case of power failure Design - Mechanical structure that can process aluminum and steel profiles at high speed and high quality - Stress relieved cast and welded parts to ensure consistent high speed accuracy - Axis speeds with an average of 95 m/min. - Ability to perform milling, notching, drilling, threading, countersinking, cutting, etc. - Profile machining length 4175 mm - Machinable profile section size 300 x 300 mm - Automatic lubrication system - Coolant spray system Control Panel - Versatile adjustable, ergonomic kiosk - 19'' screen - User-friendly Kaban interface with Windows-based, easily adjustable parametric structure - Compatibility with .NCX extension software - High performance 3 axis Mitsubishi PLC control unit- Optical communication and command increment - Communication via Ethernet- Working with G-Code - Data transfer via USB and COM Port Spindle - 8.5 kW / 24,000 rpm - HSK F63 tool holder - Encoder - Temperature control - Liquid cooling - Tool cooling Magazine - 8 tool holder capacity - Tool change in up to 8 seconds - Ø 200 mm saw can be attached Profile Supports - Automatic profile support system on both sides - Suitable for working with long profiles Vices - Narrow, designed vices protected against external factors - 6 standard clamps - Vices positioned by the X-axis - Profile sliding comfort on the vise surface with the roller system - Three different clamping forces according to the profile thanks to the pressure regulator Safety - Ability to continue from where it left off in case of power failure with the UPS system - Auto-recovery function that sends the spindle to the safe zone - Working safety with cover and safety barriers Technical Support - Periodic maintenance reminder function - Service support with remote connection