BEFARD XM 800 MINI TRACKED CRANE

BEFARD XM 800.2

Condition: new, Year of construction: 2026, BEFARD XM800.2 MINI CRANE Max. lifting capacity 990 kg Vertical reach max. 6.85 m - available model with a lifting capacity of 800 kg - lower price Standard equipment: • full remote control - both operation and travel of the device • two hydraulic extensions with a maximum vertical range of over 4.5 m • power supply by a combustion engine + 230 V electric engine (optional lithium-ion batteries) - available version only with a combustion engine - lower price • hydraulic support feet • 50-degree rotating column Pjdpov I Sk Sjfx Ahvsgi • two operating modes - fast and slow • non-marking tracks • extendable chassis (in the range of 78 cm to 110 cm) • possibility of simultaneous operation from a 230 V network and battery charging (for the Li-ion version) • anti-overload system • manual JIB arm (manual fly JIB) working in 4 positions - 2 pcs • searching hook working in 6 positions Additional, optional equipment • Hydraulic winch 500 kg • Extension of the loading platform by 500 mm • Platform for the operator to stand on • Ramps • LED work lights • Holder for the XP glass grab mounted on the platform Own weight - approx. 1100 kg Gasoline engine - VANGUARD brand 10 HP / 5.5 KW Available in the selected color.

Condition: good (used), -1Pc. Metso M&J 4000-8 Shredder . Pedpfjxhlfrox Ahvegi With Hydraulic power-unit and control-panel in container. With conveyor for output material and inlet hopper.

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 Podew S Ii Njpfx Ahvjgi - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. Podjhzbipspfx Ahvegi - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. Pgsdpfx Ahof Sqckjvji The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: used, Year of construction: 2015, operating hours: 2,485 h, machine/vehicle number: 0300212166, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.850 kg Mast: articulated arm Lifting capacity: 230 kg Pgjdpfx Ahjtr Itbovji Working height: 2.050 cm Max. horizontal reach: 1210 m Transport dimensions (LxWxH): 8.55x2.45x2.85 Please contact PFEIFER GROUP for more information

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator Pjdpfsd Iipmsx Ahvogi • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,700 kg, fuel type: diesel, color: original, power: 18.39 kW (25.00 HP), motor manufacturer: Perkins, maximum load weight: 1,000 kg, gearing type: automatic, axle configuration: 4x4, suspension: other, tire condition: 100 %, number of seats: 1, brakes: other, lifting power: 1,000 kg/m, shovel volume: 1 m³, digging bucket width: 360 mm, emission class: euro5, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW, PERKINS COMBINATION EXCAVATOR - BRAND NEW!! NEW!! NEU!! NEW!! NET PRICE: €18,500 Pgodjw Tkmyjpfx Ahvoi EU BUYERS – EUROPEAN UNION!! KÄUFER – EUROPÄISCHE UNION!! MACHINE LOCATION: MAJSKE POLJANE, GLINA!! PRICE: €18,500 NET + VAT IN CROATIA. OUTSIDE CROATIA, VAT IS NOT APPLICABLE!! SPECIFICATIONS: • WEIGHT: 2,700 kg • WIDTH: 1.65 m • LENGTH: 5.00 m • HEIGHT: 2.40 m • WORKING REACH OF REAR HYDRAULIC DIGGING ARM: 3.50 m • DIGGING BUCKET: 33 cm (various bucket sizes, hammer, etc. available as options) • FRONT LOADING BASKET QUICK COUPLER: 0.800 m2 • PALLET FORKS WITH QUICK COUPLER!! INQUIRIES ACCEPTED BY INVITATION ONLY – PLEASE SERIOUS BUYERS ONLY. EXCHANGES AND OTHER PAYMENT ARRANGEMENTS WILL NOT BE ACCEPTED. FINANCE OPTIONS: BANK LOAN OR LEASING OFFER AVAILABLE Similar Machines in Offer: • KUBOTA: €18,700, approx. 3 t • YANMAR: €27,900, approx. 3.7 t

Year of construction: 2026, condition: new, BEFARD XP602 Glass Mounting Vacuum Suction Cup • Maximum load capacity 600 kg • 8 suction cups • Two-speed vacuum system Psdpfx Ahsiauz Njvjgi • Remote control for vacuum release • Battery powered • Manual rotation 360 degrees • Lock at every 90-degree rotation • Full vertical and horizontal adjustment Additional options: • HS spacers • spare battery • transport trolley • pallet box Other models available gripper with a load capacity of 300 kg, 450 kg, 800 kg, 900 kg, 1000 kg Available in the selected color

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Pgedpfx Ajtgqlyshvoi Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller