Second-hand machinery for sale (2,396)

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797273 + 797258, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2013/2013; operating hours 2,154/14,355 h; serial numbers 797273/797258) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Cgslqjwc T Tcj Iy Hcst Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, turning length: 130 mm, spindle speed (max.): 12,000 rpm, spindle bore: 17 mm, bar passage: 13 mm, feed length X-axis: 30 mm, feed length Y-axis: 135 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840D Configuration: Dual electrospindles, dual C-axis Main spindle and moving headstock Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Spindle speed: 12,000 rpm Spindle stroke: 130 mm Counter spindle Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Max. spindle speed: 12,000 rpm Max. workpiece length in the counter spindle: 95 mm Max. workpiece length with front ejection: 130 mm mm Tool carrier Horizontal travel (X-axis): 2 × 30 mm Vertical travel (Y-axis): 135 mm Tool holder: 1 tool carrier Outside stations: 8 stations, 12 × 12 mm Inside tools: 3, mounting bore Ø 16 mm Driven tools Number of driven tools: 3 Tool holder: ER 11 / ET 1-12 Speed (2 stations): 6,000 rpm Speed (1 station): 2,000 rpm Threading: Rigid threading Celqjwc R Uks Iy Hcjgt Workpiece output: via counter spindle MACHINE DETAILS Machine dimensions (L × W × H): 1,830 × 950 × 1,717 mm Machine weight: 2,000 kg Cooling Coolant tank: 120 l Flow: 63 l/min Pressure: 2 bar Pneumatics Operating pressure: 6 bar Connection: Ø 10 mm Electrical data Supply voltage: 3 × 400 V / 50 Hz Max. power consumption: 21 kVA Cable cross-section: 10 mm² Fuses: 32 A, type AM Bar loader Standard diameter: Ø 2 – 16 mm Max. bar length: 3.2 m EQUIPMENT - FMB bar loader magazine Minimag type 3200 / 1205 A, built in 2002 - Diameter range for bar loader: Ø 2 – 13 mm - Workpiece output via counter spindle - Rigid thread cutting function - 3 driven tools - Dual C-axis with electric motors for main and counter spindle

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 2882-0127-39609, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Deckel Dialog 112 Operating voltage: 3 x 400V Coolant system: Knoll 500 K-1, built in 1994 Information according to manufacturer - no guarantee Travel X / Y / Z: 1000 x 700 x 500 mm Spindle speed: 8,000 rpm Celjwczz Uoq Iy Hcjgt Weight: 9.1 t Installation dimensions: 3.7 x 3.7 x 3.0 m

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,200 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, pressure: 4,000 bar, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64-bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Oil capacity: 130 l Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Tank capacity: approx. 1,400 kg Flow rate: 2 kg/min Weight: 1,500 kg MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Colqswcqi Us Iy Hcegt Pump operating hours: 1,200 h Electrical connection Connection: 400 V Total power requirement: 37.0 kW

Condition: excellent (used), Year of construction: 2005, operating hours: 5,607 h, Functionality: fully functional, machine/vehicle number: 181174, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,045 mm, swivel angle B-axis (max.): 225 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Machine type: 5-axis simultaneous & 5-axis freeform – CAP Tool System Year of manufacture: 10/2005 Max. swing diameter: Ø660 mm Max. machining diameter (upper/lower turret): Ø660 mm / Ø270 mm Max. machining length: 1016 mm X-axis travel (upper turret): 580 mm X2-axis travel (lower turret): 150 mm Z-axis travel (upper turret): 1045 mm Z2-axis travel (lower turret): 990 mm B-axis travel: 225° C-axis travel: 360° Chuck size: 8" Main spindle speed: 5000 rpm Main spindle bore: Ø51 mm Min. main spindle indexing: 0.0001° Chuck size 2nd spindle: 8" Speed of 2nd spindle: 5000 rpm Travel of 2nd headstock (W-axis): 1050 mm Rapid traverse speed of 2nd headstock (W-axis): 30,000 mm/min Min. indexing of 2nd spindle: 0.001° Turret type (upper): With ATC Tool shank height (upper): 25 mm Boring bar shank diameter (upper): Ø40 mm Turret type (lower): Drum turret with 9 stations Number of tools (lower): 9 tools Tool shank height (lower): 25 mm Boring bar shank diameter (lower): Ø32 mm Turret indexing time (lower): 0.14 s per switching operation Milling spindle speed: 12,000 rpm Milling spindle machining capacity: milling Ø100 mm, end milling Ø32 mm, drilling Ø30 mm, tapping M27 Rapid traverse speed X-axis (upper turret): 38,000 mm/min Rapid traverse speed X2-axis (lower turret): 38,000 mm/min Rapid traverse speed Y-axis: 26,000 mm/min Rapid traverse speed Z-axis (upper turret): 38,000 mm/min Rapid traverse speed Z2-axis (lower turret): 38,000 mm/min Rapid traverse speed C-axis: 400°/min Jog feed speed X-axis (upper turret): 2,000 mm/min Jog feed speed X2-axis (lower turret): 2,000 mm/min Y-axis jog feed rate: 2,000 mm/min Z-axis jog feed rate (upper turret): 2,000 mm/min Z2-axis jog feed rate (lower turret): 2,000 mm/min C-axis jog feed rate: 2,000°/min Tool shank / tool holder capacity: CAPTO C6 – 20 tools Max. tool diameter: Ø90 mm (Ø125 mm with free adjacent positions) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.3 s Main spindle motor (30 min / continuous operation): AC 22 kW / AC 15 kW 2nd spindle motor (30 min / continuous operation): AC 18.5 kW / AC 15 kW Milling spindle motor (20% ED): AC 15 kW Coolant pump motor: 1.2 kW Power consumption (continuous operation): 66.0 kVA Compressed air connection: 5 bar, 500 l/min Coolant tank capacity: 300 l MACHINE DETAILS Machine height: 2,597 mm Operating times: - Total time switched on: 2026:04'40" - Automatic operating time: 1323:07'43" - Automatic cutting time: 669:16'50" - Total cutting time: 5606:49'54" - Total operating time: 2028:04'40" EQUIPMENT Various machining tools included Test and demonstration on site possible Cgjlqswcl Uxe Iy Hcot

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Y-axis travel: 2020 mm Z-axis travel: 600 mm Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Cgjlq Iy Hjwbvgiscst Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Operating parameters Max. waterjet operating pressure: 4,000 bar MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts

Condition: ready for operation (used), Year of construction: 2010, operating hours: 2,239 h, Functionality: fully functional, machine/vehicle number: 796105 + 796713, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2006/2010; operating hours 147/2,239 hours; serial numbers 796105/796713) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Cgjlq Iyswc T Sxs Hcst Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 1984, Functionality: fully functional, total length: 1,400 mm, total width: 1,600 mm, total height: 2,200 mm, pressing force: 8 t, TECHNICAL DETAILS Tool holder: Euronorm Type EU 1 (441) Number of stations: 37 Capacity: max. 266,000 tablets/h Pressing data Pressing force: max. 80.0 kN Cjlowbu Ufsq Iy Hcjgt Pre-press force: max. 20.0 kN Tablet thickness: max. 8.5 mm Tablet diameter: max. 25 mm MACHINE DETAILS Space requirement: 1,400 x 1,600 x 2,200 mm EQUIPMENT - Filling curves for 10 mm, 14 mm & 18 mm filling depth - Tableting tool not included.

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 182-69, No reserve price - guaranteed sale to the highest bidder! Cgslq Iyowczxto Hcst TECHNICAL DETAILS Connected load: 10 kVA Operating voltage: 3 x 400 V Weight: 4,000 kg Specifications according to manufacturer - no guarantee Travel X / Y / Z: 550 x 300 x 425 mm Tool changing system: Change arms Spindle speed: 10,000 rpm Control system: Siemens Sinumerik Installation dimensions: 3.3 x 2.9 x 3.1 m Transport dimensions on pallet: 3,550 x 2,240 x 2,450 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,433 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Punching force: 220 kN Max. sheet thickness: 8 mm Max. Sheet thickness for stainless steel: 8 mm Max. Punching diameter: 76.2 mm Working area and workpiece Working area: 2,585 x 1,250 mm Max. Workpiece weight: 200 kg Cjlq Iswcqf Njy Hcegt Speed and precision Max. Speeds: 100 / 60 / 116 m/min Accuracy: 0.1 mm MACHINE DETAILS Operating hours: 62,433 h Length: 6,100 mm Width: 6,760 mm Height: 2,500 mm Weight: 13,000 kg

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, measuring range X-axis: 275 mm, measuring range Y-axis: 250 mm, workpiece length (max.): 4,000 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Scan Performance Measurement Rate: 480,000 measurements/s Scan Area: 275 x 250 mm Resolution: 0.050 mm Accuracy: up to 0.030 mm Volumetric Accuracy: 0.020 mm + 0.060 mm/m Part Size Range: Recommended: 0.1 – 4 m Laser and Light Source Light Source: 7 laser crosshairs (+1 additional line) Laser Class: II (safe for the eye) Data Formats Output Formats: .dae, .fbx, .ma, .obj, .ply, .stl, .txt, .wrl, .x3d, .x3dz, .zpr Software 3D Software Platform: VXelements Reverse Engineering Software: VXmodel Software (1-Year License) EQUIPMENT - Laptop - 4 m connection cable - 8 m connection cable - Power supply - Original carrying case - the workstation is not included! Cslqewbuxwe Iy Hcegt - 15 sets of positioning targets - Calibration plate - User manual The VXmodel software is a post-processing software integrated into Creaform's VXelements 3D software platform. It enables the seamless transition of 3D scan data to CAD software or 3D printing software. The software allows for the simple and fast processing of 3D scans for additive manufacturing.

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, material thickness: 4 mm, product width (min.): 105 mm, product width (max.): 420 mm, product height (max.): 80 mm, product height (min.): 6 mm, product length (max.): 720 mm, product length (min.): 170 mm, A new mainframe computer (IPC) was installed in 2022. Ready for shipment: Machine can be shipped for an additional charge of €1,500! Celq Iy Hewbtmgjcjgt TECHNICAL DETAILS Cycle rate: 60 covers/min Setup time: approx. 5 min Processable formats Cover height: 170 - 720 mm Cover width: 105 - 410 mm Spine width: 6 - 80 mm Material thickness: 1 - 4 mm MACHINE DETAILS Area of application: Processing hardcovers, book covers, and 3-part covers EQUIPMENT - Soft spine feeder

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Colqjwc Ucfo Iy Hcogt Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 50 h, Functionality: fully functional, Multihead Weigher + Flow Wrapper Machine has only 50 operating hours! TECHNICAL DETAILS Cgelowbu Sqoq Iy Hcst Maximum number of bags: 50 bags/min Multihead Weigher CM-B10 Weighing Heads: 10 Weighing Range: 10 - 1,000 g Volume (max.): 1,300 ml Flow Wrapper E-250 Film Roll Diameter (max.): 450 mm Bag Width: 50 - 250 mm Bag Length (max.): 400 mm Current Setting – Bag Width: 155 mm Current Setting – Bag Length: 350 mm EQUIPMENT - Film holder for rolls up to 450 mm - Manual filling via central hopper - Ring-shaped weighing heads

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1995, operating hours: 9,978 h, load capacity: 3,000 kg, lifting height: 5,960 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Lift height: 5,960 mm Free lift: 1,650 mm Load capacity: 3,000 kg Load center: 500 mm Mast type: Triplex, free lift Tire type: SE Motor: Electric Cgeljwcq Sceq Iy Hcot Fork carriage and forks Fork carriage width: 3,410 mm Fork positioner: 420 / 2,810 mm Forks: 130 mm × 45 mm × 1,370 mm MACHINE DETAILS Length: 3,060 mm Width: 2,540 mm Platform width: 1,350 mm Platform height: 440 mm Forklift height: 2,470 mm Mast height: 2,700 mm EQUIPMENT - Fork positioner

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 12 mm, working length: 4,100 mm, TECHNICAL DETAILS Sheet length: 4,100 mm Sheet thickness: 12 mm Backgauge: 1,000 mm Sidegauge: 1,500 mm with scale, T-slot, and tilting cam Sheet support arms: 2 x 1,000 mm, with T-slot Total power requirement: 30 kW Control and drive Control: ELGO (for backgauge) Backgauge drive: Motorized, on recirculating ball screws, foldable Knives Lower blade: 4-way reversible Colewcqzkjq Iy Hcogt Upper blade: 2-way reversible MACHINE DETAILS Dimensions (L × W × H): 5,350 × 2,250 × 2,250 mm Weight: approx. 16,300 kg EQUIPMENT - Swing-cut design - Clearly arranged control panel mounted on a swivel arm - Adjustable cutting length for efficient processing - Hydraulic hold-down devices positioned close to the cutting edge - Foot switch - Central manual cutting gap adjustment - Easy blade replacement and resharpening - Operating instructions in German

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Cgslqewcqfpo Iy Hcst Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, Functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Cgslq Iyswcprne Hcjt Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Feed (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Rated force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Feed (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of stationary tools (internal): 6 Diameter: 20 mm Number of stationary tools (external): 4 Tool shank size: 12 × 12 mm Number of rotating tools: 4 Collet type: ESX 16 MACHINE DETAILS Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA On-time: 85,620 h Program run: 27,896 h EQUIPMENT - FMB Turbo 3-36 bar loader / 4200 / A, built in 2007 - Coolant tank with chip conveyor - Central lubrication system - Handheld control unit - Documentation available

Condition: ready for operation (used), Year of construction: 2014, operating hours: 543 h, Functionality: fully functional, machine/vehicle number: 797298, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, One robot will be auctioned (built in 2014; operating time 543 hours; serial number 797298) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Four-pack with robots built in 2013 and an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Cgjlq Iy Hjwc Uaqscet Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Year of construction: 2010, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 13483, No reserve price - guaranteed sale to the highest bidder! Cjlq Iyjwcntdo Hcsgt With new knives, screens, and wear-resistant plating, as well as overhauled electrical components! TECHNICAL DETAILS Motor power: 75 kW Motor speed: 990 rpm Design: heavy-duty Inlet & Rotor Inlet opening: approx. 450 x 580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Number of stator knives: 2 rows Number of rotor knives: 3 x 3 EQUIPMENT - Solid enclosed rotor - Chunk mill, ideal for crushing solid parts - Hardox wear-resistant plating - new - Stator and rotor knives - new - Hydraulic unit - Temperature monitoring on the housing - Screen basket and 1 screen - new - Control cabinet with new cabling, approx. 6 m

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 12940, pressing force: 50 t, working length: 2,550 mm, stroke distance: 120 mm, TECHNICAL DETAILS Press force: 50 t / 500 kN Motor power: 5.5 kW Axes: Y1, Y2, Z Working area Bending length: 2,550 mm Cgslswcqttsq Iy Hcet Stroke length: 120 mm Cylinders: 2 Speeds Lowering speed: 100 mm/s Pressing speed: max. 13.5 mm/s Retraction speed: 75 mm/s Hydraulics Oil tank: 100 l MACHINE DETAILS Length: 2,750 mm Width: 1,100 mm Height: 2,050 mm Weight: approx. 3,500 kg EQUIPMENT - Hydraulic tool clamping for the upper tool - Darley system

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Celqswcqa Hj Iy Hcegt Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke distance: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm Colewcn H Roq Iy Hcsgt

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Max. drilling/tapping: Ø 8 mm / M6 Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Colq Iy Hswcn Eyecjgt Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Celq Iy Hewcnubscsgt Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo