Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 74005, Description of the basic machine - Horizontal end machining center for simultaneous end machining on both sides of shaft-shaped parts - Cutting to length, centering, drilling, cross drilling, chamfering, slot milling, etc. TECHNICAL DETAILS Control: Siemens Sinumerik 840D SL Workpiece diameter: max. 60 mm Workpiece length: 500 mm Horizontal stroke: 200 mm Transverse stroke: 200 mm Tool carrier system left/right: fixed motor spindle / 6-position crown turret MACHINE DETAILS Total mass: 16 t Dujbst Hkp Tj E U Uunjt Voltage: 3x400V 50 Hz Connected load: 74 kW

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 28634, wheel diameter: 200 mm, controller manufacturer: Siemens, controller model: Sinumeric 840 C, module thread tooth pitch (max.): 3, module thread tooth pitch (min.): 0.5, Machine from prototype production - without automation TECHNICAL DETAILS Control: Siemens Sinumeric 840 C Wheel diameter: max.200 mm Wheel width: 250 mm Module: 0.5 - 3 MACHINE DETAILS Total power requirement: 45 kW Supply voltage: 400 V / 50 Hz Machine weight: approx. 8.5 t Space requirement: approx. 4.4 x 2.4 x 2.7 m Dusb E U Ujt Hkk Rjunjt

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 1924, grinding wheel diameter: 450 mm, rotational speed (max.): 3,000 rpm, controller manufacturer: OSAI, controller model: 10 Series, grinding length: 2,710 mm, TECHNICAL DETAILS Control unit: OSAI 10 Series Sanding diameter: 250 mm Sanding length: 2710 mm Wheel diameter: max. 450 mm Spindle drives: Arena Siemens Programming distance: 0.001 - 500 mm Spindle speed: 3,000 rpm X-axis: workpiece rotation 0 - 360° Y-axis: bed slide -180 mm a + 2 mm Z-axis: longitudinal slide -10 mm a + 2390 mm W-axis: Grinding wheel cleaning -90° a + 90° Dusbet Hhhae E U Uunot MACHINE DETAILS Total power requirement: 45 kW Supply voltage: 3x400 V, 50 Hz Machine weight: approx. 15 t Space requirement L x W x H: 7.1 x 4.7 x 2.7 m Air pressure: 6 bar Air consumption: 30 l/h Control cabinet dimensions: 1800 x 800 x 2000 mm Switch cabinet weight: approx. 1.5 t The machine does not have a module for worm grinding, but an incline.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 76003, grinding wheel diameter: 275 mm, gear diameter: 150 mm, module thread tooth pitch (max.): 3, module thread tooth pitch (min.): 1, With automated loading of the Felsomat machine TECHNICAL DETAILS Control system: Siemens 840D / Reishauer VM24RZ Wheel diameter: max. 150 mm Module: 1 - 3 pieces Dueb Eot Hg Dys U Uunjt grinding wheel diameter: 206 - 275 mm MACHINE DETAILS Machine weight: approx. 7.2 t Space requirement: approx. 2.44 x 1.43 x 2.46 m Rated power: 36 kVA Mains voltage: 3x400 V, 50 Hz No twist control grinding option

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 11045534554, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS x-path: 500 mm y-path: 420 mm z-path: 380 mm Control system: Siemens 840 D Tool holder: HSK 63 Spindle speed: 18,000 rpm Magazine places: 32 pieces Tool length: 280 mm Tool weight: max. 6 kg Feed rate: 20,000 mm/min Rapid traverse: 50 m/min Input unit: 0.01 mm Position measuring system Resolution: 0.001 mm Position tolerance: 0.010 mm MACHINE DETAILS Duob E U Uuot Hgyujnet Machine weight: approx. 5.5 t Installation dimensions: 5400 x 6800 x 2584 mm Transport dimensions: 2295 x 2683 x 2436 mm

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, HIGLIGHTS - Substrates in oversize format - Inline connection of various finishing systems - Comprehensive range of materials - Environmentally friendly printing - ProfitAccelerator business development tools - Xerox prInteract combines regular system checks with Xerox expertise - Automatic print density control - Inline spectrophotometer for maximum detail, advanced color profiling, spot color calibration and automatic color control - Carrier Dispensing System delivers consistent, uniform color from first to last proof and from one print job to the next TECHNICAL DETAILS Dujbot Hghfo E U Uunet Paper size 178 - 364 x 178 - 572 mm Printable area: paper size -1 mm margin on each side Paper weight uncoated: 60 - 350 g Coated paper weight: 90 - 350 g Speed: 6,600 prints/h Capacity in reloading system: 30,000 sheets Counter reading: 15.7 M pieces

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC®, Space-saving 2D plasma cutting system MicroStep MasterCut Eco including software package TECHNICAL DETAILS Plasma power source equipment: with automatic gas console and Contour Cut Working area: 3,000 x 1,500 mm Cutting torch: 2D plasma torch Machine control: MicroStep iMSNC® Software: MicroStep CAM software Asper Basic® Plasma power source: Kjellberg® HiFocus 161i Cutting range: max. 50 mm / recommended 0.5 - 38 mm Grooving thickness: max. 30 mm Infinitely adjustable: 10 - 160 A Duob E U Uust E N D Henot Cutting current: 10 - 160 A (100% ED) Marking current: 5 - 25 A (100% ED) Duty cycle: 100 % at 160 A Plasma gases: O2, N2, air, air, argon, hydrogen, forming gas F5, argon MACHINE DETAILS Installation dimensions without plasma source: approx. 2.6 x 5.0 m Installation dimensions including plasma source, control panel, control room: approx. 4.2 x 5.5 m Working temperature: +5 to +30 °C Humidity: max. 90 % (at 20° C) Input power: max. 6 kW (3/Ph.400 V, 50 Hz, 20 A) iMSNC control system Plasma source connection voltage: 400 V, 3 Ph, 50 Hz Fuse protection plasma source: T 50 A "C" Connected load plasma source: 28 kVA Plasma source dimensions: 985 x 570 x 1,185 mm Plasma source weight: 206 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,516 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 250 mm, pressure: 3,800 bar, Water cutting system has been inspected annually by the manufacturer Bystronic and has been running in 1-shift operation. TECHNICAL DETAILS Control system: Bystronic BySoft Working pressure: 3800 bar Pump: Bypump 52 kW Cutting speed: 50 m/min Number of cutting heads: 2 Working area: 6,000 x 3,000 x 250 mm Workpiece weight: max. 790 kg/m² Workpiece thickness: max. 200 mm Positioning speed X/Y: 60 m/min Simultaneous positioning speed: 84 m/min Positioning accuracy: ± 0.05 mm/min Repeat accuracy: ± 0.025 mm/min Operating hours: 16,991 h Cutting hours: 14,516 h EQUIPMENT - Light barrier concept, which ensures free access from 3 sides. - Cutting carriage with 2 x 2D heads (min. distance 225 mm) - Automatic sludge removal Duob Est Eblpe U Uunet - Automatic level control of the water level - 1000 kg abrasive storage tank

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 511527, turning length: 400 mm, turning diameter: 200 mm, controller manufacturer: Index, controller model: C200-4, number of slots in tool magazine: 28, TECHNICAL DETAILS Turning diameter: 200 mm turning length: 400 mm Control: C 200-4 Index Dujb Eot Dm Nqs U Uunst Main spindle: Usable bar diameter: 60 mm Spindle diameter in front bearing: 100 mm Tool turret: Number of turrets: 2 Turret (x-fold): 2 x 14 pos MACHINE DETAILS Weight machine + cabinet: 4280 + 390 kg Operating voltage: 400 V, 50 Hz EQUIPMENT High-pressure cooling with conditioning system Various tool holders and accessories (see pictures) WITHOUT TOOL CABINET AND WITHOUT TOOL BENCH.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, The machine has been inspected by used machine experts and is in excellent condition. Machine was recalibrated in 2021! Deb Est Di Trs U Uunsut Multi-sensor capability allows to work with the following probes: Scanning probe ZEISS VAST-XXT, Viscan, DTS, LineScan, RST-P and RENISHAW SP25, TP2, TP6, TP20 and TP200. TECHNICAL DETAILS Travel of the axes: 3000 x 1200 x 1000 mm Table material: granite structure Automatic birotative head: RDS 2.5º x 2.5º x 2.5° Software: Calypso 5.6 (included in purchase) Machine accuracies: PE_E=(3.2+L/250) μm / MPE_P=3.0 μm / MPE_THP=4.0 μm.

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 8FBEK18T-10385, Year of construction: 2016, operating hours: 19,769 h, load capacity: 1,800 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, Full functionality according to FEM-4.004 Maintained & tested battery with min. 95 % capacity Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 40% Driver's seat and seat belt as good as new New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Lifting capacity: 1,800 kg Lifting height: 3,300 mm Load center of gravity: 500 mm Mast type: Duplex Fork length: 1000 mm MACHINE DETAILS Operating hours: 19,768 h Length: 1,850 mm Dueb E Ust Di Ays Uunot Overall width: 1,000 mm Overall height: 2,150 mm Front tires: solid rubber Rear tires: Solid rubber Tare weight: 2,475 kg + 790 kg battery Battery voltage: 48 V Battery year of construction: 2020 (stock battery, few cycles) Battery capacity test: 99% Battery: 625 Ah EQUIPMENT - Sideshifter

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 10363, Year of construction: 2018, load capacity: 1,750 kg, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, tested and reconditioned according to FEM-4.004 (UVV) specifications. Djb E Ust Dam Ne Uunsut TECHNICAL DETAILS Drive type: GAS/LPG Lifting capacity: 1,750 kg Lifting height: 5,000 mm Load center of gravity: 500 mm Mast type: Triplex Lifting height: 5,000 mm Fork length: 1,200 mm MACHINE DETAILS Operating hours: 14,195 h Overall height: 2,200 mm Dead weight: approx. 3,070 kg Front tires: solid rubber Rear tires: Solid rubber EQUIPMENT - Sideshift - Special equipment: Free lift

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: FN587504, Year of construction: 2018, operating hours: 8,085 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Full functionality according to FEM-4.004 Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 30% Driver's seat and seat belt as good as new New paintwork in original colors and with original stickers TECHNICAL DETAILS Drive type: Gas Lifting capacity: 2,500 kg Lifting height: 4,700 mm Load center of gravity: 500 mm Mast type: Triplex Fork length: 1,150 mm MACHINE DETAILS Operating hours: 8,085 h Overall height: 2,200 mm Dead weight: 4,111 kg Front tires: Solid rubber - non-marking Rear tires: Solid rubber - non-marking Dujbst Dah Hj E U Uunjt EQUIPMENT - Sideshift - Load protection grille - Front work lights - Rear rotating warning light

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, sheet thickness (max.): 6 mm, total width: 31,900 mm, TECHNICAL DETAILS Sheet width: 3,190 mm Sheet thickness: 6.3 mm Stand width: 3,200 mm Dusb Ejt Ahl Rs U Uunst Stop depth: 5 - 1,000 mm Stroke rate: 30 - 50 1/min Cutting angle: 1.2° Control system: RAS System 2005 Space requirement: approx. 3.83 x 3.82 m EQUIPMENT - Small parts diverter - Automatic cutting gap adjustment - Scrap separation - Return-to-sender - Cutting technology: oscillating cut - Documentation

Condition: excellent (used), Year of construction: 2007, operating hours: 7,673 h, Functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: 530 iTNC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 10, swivel angle B-axis (max.): 180 °, Machine with additional equipment Dsb Eotzy Izj U Uunout DESCRIPTION Sturdy 4-axis machine, specially developed for tool, mold and die making 4-sided machining through the use of a rotary table Closed design of the double beam and cross slide with internal, all-round guided slide milling unit (box-in-box design) Vertical gantry design for controlled dynamics and accuracy Consistently good milling results thanks to load- and thermo-symmetrical design Stationary workpiece for consistently good surface quality High productivity thanks to roughing and finishing in a single clamping operation Perfect chip removal, especially for deep contours TECHNICAL DETAILS Control: Heidenhain 530 iTNC X-axis: 1,600 mm Y-axis: 1,200 mm Z-axis: 800 mm B-axis: ± 180° Speed: 10000 rpm Milling head: Integrated fork milling head with HSK 100 main spindle Power (S1/100%): 25 kW Torque (S1/100%): 200 Nm Tool holder: HSK - A100 Diameter of front spindle bearing: 100 mm Table top size: 1,600 x 1,600 Workpiece weight: 10,000 kg Travel speeds: 30,000 mm/min Axis accelerations: 2.5 m/s² Automatic tool changer: 10 tool positions MACHINE DETAILS Cooling: IKZ Chip disposal: available Machine weight: 38,000 kg Dimensions: approx. 7 x 8.5 x 3.5 m EQUIPMENT - Cooling system - Chip disposal

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,200 mm, table load: 2,000 kg, rotational speed (max.): 4,000 rpm, controller manufacturer: Heidenhain, controller model: TNC i530, Machine has been overhauled by technical experts for used milling machines CME. TECHNICAL DETAILS Travel: 1200 x 750 x 750 mm Working speed: 20 m/min Duobet Di Tfj E U Uunst Rapid traverse: 30 m/min Speed: 4,000 rpm Control: Heidenhain TNC i530 Table size: 1300 x 700 mm Table load: 2 t Fixture: ISO-40 Power: 28 kW EQUIPMENT - Electronic handwheel - chip conveyor Machine is in very good condition and ready for immediate commissioning.

Condition: ready for operation (used), Functionality: fully functional, grinding length: 630 mm, grinding width: 250 mm, grinding height: 300 mm, grinding wheel width: 46 mm, disc diameter: 220 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Dobetzluyo E U Uunout Sanding length: 630 mm sanding width: 250 mm Workpiece height: 300 mm Table size: 2050 x 340 mm Magnetic plate size: 600 x 250 mm Table feed range: 0.005 - 0.045 mm/stroke Grinding spindle infeed: 0.001 - 0.045 mm/stroke Grinding wheel dimensions: Ø 220 x 46 mm MACHINE DETAILS Operating voltage: 3 x 380 V, 50 Hz Rated current: 20 A Control voltage: 220 V Magnetic disk voltage: 110 V

Condition: ready for operation (used), Year of construction: 2001, operating hours: 55,569 h, Functionality: fully functional, travel distance X-axis: 560 mm, controller manufacturer: Fanuc, controller model: 16 MC Professional 3, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 126, TECHNICAL DETAILS Control system: Fanuc 16 MC Professional 3 Travel X / Y / Z: 560 / 560 / 560 mm Spindle speed: 20,000 rpm Torque: max. 167 Nm Djb E U Ujtzc D Ssunsut Tool holder: HSK-A63 DIN 69893 Tool magazine: 126 places Tool change time: 1 s Max. tool diameter: 80 mm max. tool length: 300 mm Distance spindle head to table: 150 - 710 mm distance table-UK-spindle: 80 - 640 mm Pallet size: 400 x 400 mm Pallet load: 400 kg Pallet change time: 7 s Rotary table indexing: 1° Table speed: 5000 rpm Spindle drive: 22 kW Feed: max. 40,000 mm/min Rapid traverse: 40,000 mm/min MACHINE DETAILS Total power requirement: 64 kW Machine weight: approx. 15 t Space requirement: approx. 9.0 x 3.0 x 2.8 m Spindle hours: 55,569 h Program run: 66,600 h Switch-on time: 163,411 h

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, opening width: 60 mm, working width: 2,800 mm, controller manufacturer: KUPER, controller model: PC 477, plate width: 2,700 mm, sheet width: 5,200 mm, The system is designed for processing MDF solid chipboard and lightweight boards, for example. Line control for all sub-machines is new! ASSEMBLY - Feeding - Brushing machine - Glue application machine - Disc roller conveyor with covering rake - Pre-laying belt - Covering belt - Continuous press - Stacking belt - Impact wall System was converted from oil to hot water in 2015. TECHNICAL DETAILS Brushing machine Lehbrink WL 40 Working width: 2800 mm Passage height: 60 mm Brush roller: 1 at the top and 1 at the bottom Motor: 2 x 280 V, 50 Hz Outfeed roller conveyor: driven, foldable Automatic height adjustment: automatic via servo motor Control: via the higher-level control system Glue spreader Hymmen KLM 2800 Roller length: 2800 mm Passage height: 100 mm Application rollers: 2 pieces, rubberized Diameter: 285 mm Dosing rollers: 2 pieces, rubberized and with dosing roller cooling Glue level regulation: by means of sensors (bracket installed) Dueb E U Uuotzcx Asnjt Height adjustment: automatic, by means of servo motor Control: via the higher-level control system Disc roller conveyor Length: approx. 1000 mm Width: approx. 2800 mm Discs: made of V2A, can be extended sideways Legerchen: automatic Pane pitch: approx. 180 mm Pane spacing: approx. 140 - 180 mm Support rake: automatic, with scraper ruler Pre-alignment station: crosswise for aligning the glued workpieces Design: Complete substructure in sturdy design with V2A trays underneath the disk rollers Query of laying depth: via light barrier Wemhöner VOF 3- 900/3 throughfeed press Loading belt: driven Length: approx. 5500 mm Width: approx. 2800 mm Design: upper piston design Plate size: 2700 x 5200 mm Heating medium: Hot water Temperature of pallets: 80 °C Structure: 1 floor = 2 steel plates Specific pressure film loading: approx. 6.4 kg/cm² Fault and double document protection: for the entire press, measuring sensor and output unit Pressure setting via menu: MDF solid chipboard and lightweight boards Cylinder switching: automatic Stacking Bürkle Stacking system length: approx. 5500 mm Stop stiffness: 1300 mm Protective panel feed: from the right Roll width: 800 mm Machine control KUPER PC 477 SIMATIC Panel PC: with 15" Touch TFT Color Display based on Windows XP embedded operating system. Programmable logic controller: programmed on SIMENS Step 7 Decentralized periphery of inputs and outputs: via Profibus LED display: all inputs and outputs Integrated line control: for contactless control of the processing units Interface: SIMENS input panels MACHINE DETAILS Dimensions: 5800 x 3450 x 2800 mm Height allowance oil tank: 400 mm Height allowance substructure: 200 mm Height allowance armored rollers: 140 mm Bidders are obliged to collect the vehicle by the end of July 2024.

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 600 h, Functionality: fully functional, New price 110T € TECHNICAL DETAILS System: 3R with 20-fold ATC Capacity of the work tank: 1500 x 940 x 520 mm Work table size: 1000 x 600 mm Longitudinal displacement (X-axis): 600mm Transverse displacement (Y-axis): 450mm Z-axis travel (Z-axis): 400mm Dujbotyyhtj E U Uunet Distance between clamping plate and table: 350~750 mm Max. Electrode weight: 250 kg Max. Weight of the workpiece: 3000 kg Capacity of the liquid tank: 1100 L MACHINE DETAILS External dimensions of the machine (WxDxH): 2850 x 2700 x 2610 mm Weight of the machine: 3600 kg Max. Processing current: 60 A / 90 A (optional) Max. Power consumption: 7 KVA / 10 KVA Max. Processing rate: 400 mm3/min Min. electrode wear rate: 0.12% Best surface finish: Ra 0.2 μm Min. D. R. O. Resolution (mm): 0.001mm Weight of the generator: 320 kgs

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, Machine is ready for immediate use! TECHNICAL DETAILS Number of thread rolls: 2 Thread rolling pressure: 24 t Shaft diameter: 69.85 mm Roller mounting length: 200 mm Rollable material: 5 - 75 mm Rollable pitch: 8 mm MACHINE DETAILS Dusb Estyygce U Uunst Weight: 3000 kg Dimension: 2120 x 900 x 1450 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 12,464 h, Functionality: fully functional, machine/vehicle number: 29100003782, travel distance X-axis: 640 mm, controller manufacturer: Siemens, controller model: Sinumerik 810 D, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, Reconditioned by technical experts for used DMG-Mori machining centers. TECHNICAL DETAILS Travel X / Y / Z: 640 / 600 / 500 mm table: 850 x 600 mm Table load: max. 600 kg Speed: 18,000 rpm Rapid traverse X / Y / Z: 70 / 40 / 40 m/min Tool changer: 30 positions, ISO 40 Control: Siemens 810 D Duob Est Di Nte U Uunet MACHINE DETAILS Internal cooling: 40 bar EQUIPMENT - Tool measuring device

Condition: good (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 1,200 mm, controller manufacturer: Heidenhain TNC 426, rotational speed (max.): 16,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis: 1,200 mm Y-axis: 900 mm Z-axis: 500 mm Speed range: 16,000 rpm Control: Heidenhain TNC 426 MACHINE DETAILS Tool holder: SK 40 Tool places: 30 Table size: 1,400 x 900 mm Space requirement (LxWxH): 4.5 x 5.5 m Machine weight: 12,000 kg Dob E U Ujtzlpksunsut EQUIPMENT Chip conveyor Internal cooling (IKZ) Coolant system Coolant tank 300 L

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, SheetMaster: 1305 (shortened installation) SheetMaster equipment: Peel-off suction cup via suction cup 9, vacuum sensor system, central lubrication, sheet thickness gauge for double sheet control, TASC 100 control unit, suction cup plate module with vacuum sensor system TrumaGrip: with 400 mm scissor lift table Duob E U Uujtyapqenst TrumaGrip equipment: residual grid grippers with sensors TECHNICAL DETAILS Working range X / Y: 2535 / 1280 mm Cutting force: max. 220 kN Sheet thickness: max. 8 mm Active hold-down force: 4.5-20 kN (programmable in stages) Workpiece weight: max. 200 kg Control: Trumpf based on Siemens Sinumerik 840D Linear magazine: 18 tools with 3 clamps programmable part flap: max. part size 500 x 500 mm Stroke sequence punching E-1: 1200 1/min stroke sequence marking: approx. 2800 1/min Acceleration (up to 100 kg sheet weight) X/Y/C: 20/10/350 m/s Tool change time single tool:

Condition: good (used), Year of construction: 2021, operating hours: 1,176 h, Functionality: fully functional, machine/vehicle number: 00583/0421/226923, High precision, compact, rigid, high performance, with direct drive, for production Dueb Eetx Uvcs U Uunst Machine already professionally dismantled and no longer under power. TECHNICAL DETAILS - (according to manufacturer's brochure) Spindle orientation: vertical Structure: with mobile table, columns Number of tools: 40 tools Area of application: for cutting X-stroke: 820 mm Y-stroke: 510 mm Z-stroke: 510 mm Rotation speed: 10,000 rpm Power: 14.3 kW Advance speed X-axis: 24,000 mm/min Y-axis advance speed: 24,000 mm/min Advance speed Z-axis: 24,000 mm/min Maximum table load: 500 kg Tool weight (max.): 7 kg Positioning accuracy: 0.01 mm Repeatability: 0.003 mm MACHINE DETAILS Total weight: 5,800 kg Total width: 4,390 mm Total height: 2,900 mm Operating hours: 1176 h (as of November/December) EQUIPMENT Chip conveyor