Second-hand machinery for sale (2,405)

Condition: excellent (used), Year of construction: 2005, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: 0-250-04-2333, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 220 mm, TECHNICAL DATA Table length: 2750 mm table width: 1050 mm Workpiece thickness: 100 mm X-axis: 3310 mm Y-axis: 1735 mm Z-axis: 220 mm Tool holder: HSK-F 63 Magazine: 8-position plate Unit: 2 spindles Drill: (6+4) x 32 X-axis speed: 60 m/min Y-axis speed: 50 m/min Z-axis speed: 20 m/min Standard compressed air quality: according to ISO 8573-1 quality class 3 Connection: R 1/2" Pressure in the supply line: 7 bar Compressed air consumption: approx. 100-200 l/min Suction connection: Ø 200 mm Height: 2110 mm Total extraction capacity: min. 3170 m³/h Air speed: min. 28 m/s Pressure loss: min. 2000 Pa MACHINE DETAILS Loading dimensions: 5400 x 2300 x 2400 mm Machine weight approx.: 3600 kg Protection class: IP53 Operating voltage: 3 x 400 Volt, ±5% Frequency: 50 Hz External power supply: 32 A Recommended fuse: 35 A Dcjlisuh Uyqeqyxrog Total connected load approx.: 17.5 kW FUNDAMENT Surface pressure: in the area of the support points 1.2 N/mm² Floor covering: concrete quality B25, compressive strength ≥ 200 mm

Year of construction: 1989, Condition: good (used), Functionality: fully functional, Important: It will take approx. 3 weeks to dismantle. Non-binding cost estimate for dismantling: EUR 78,000 Wiegand 5-stage evaporator with its own cooling tower. Dsliqetta Hyjyxrjcg Was in operation until 2021. TECHNICAL DATA Capacity and operating data Feed rate: 17500 kg/h; 11° Brix 20 °C Concentrate quantity: 2700 kg/h; 70° Brix 10-15°C Evaporation: 14800 kg/h Minimum feed quantity: 10,500 kg/h; 60% Essence quantity: 115 l/h Essence temperature: 5-10 °C Energy data Steam consumption: min 10 bar g for evaporation: 3950 kg/h for essence recovery: 150 kg/h Cooling water requirement: 175 m³/h Connected load for motors of the product and condensate pumps as well as the essence recovery: 90 kW Connected load for the vacuum pumps: 22 kW Outlet temperature of the raw vapour condensate: approx. 20-30 °C Outlet temperature of the clear vapour condensate: approx. 55°C Outlet temperature of the pure condensate: approx. 94°C Description of the system Plant type: Falling film evaporation plant Number of effects: 5 Arrangement of the effects: Parallel flow (1-2-3-4-5) Preheater: external straight tube preheater Heating: Direct steam Condensation system: Surface condensation Vacuum unit: Irrigation vacuum pumps

Condition: excellent (used), Year of construction: 2016, operating hours: 5,248 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 8 mm, sheet thickness brass (max.): 8 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 70 mm, TECHNICAL DETAILS Travel X x Y: 4000 x 2000 mm Cutting area X x Y x Z: 4064 x 2032 x 70 mm Workpiece weight: 1270 kg Positioning speed per axis / simultaneous: 100 / 140 m/min Axis acceleration: 12 m/s² Positioning accuracy: ±0.1 mm Repeat accuracy: ± 0.05 mm Edge detection accuracy: ± 0.5 mm Table: shuttle table system Laser source: Fiber 4000 Power: 4000 W Wavelength: 1µm Polarization: unpolarized Pulse frequency: 1 - 2500 Hz Dceliqot E Sxmsyxreg Sheet thickness steel: 20 mm Sheet thickness aluminum: 15 mm Sheet thickness stainless steel: 15 mm Sheet thickness copper: 8 mm Sheet thickness brass: 8 mm MACHINE DETAILS Dimensions: 12.9 x 6.75 x 2.5 m Weight: 15 tons Power: 25 kW Switch-on time: 23,477 h Laser switch-on time: 5,248 h

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60 h, Functionality: fully functional, total length: 41,823 mm, working width: 800 mm, roller diameter: 50 mm, working height: 700 mm, Parcel transport system with weighing unit TECHNICAL DETAILS Transport system length: approx. 42 m Transport system width: 800 mm Roller diameter: 50 mm Working height: 700 mm Roller material: galvanized Roller spacing: 75 mm Table and frame material: made of electrostatically painted sheet metal and steel profiles Drive of the conveyor belt: Three-phase asynchronous motor and worm gear Weighing unit: gravity rollers ASSEMBLY (starting from bottom left) Number of system elements: 8 Straight element: 5,000 mm, 1.5 kW Weighing unit: 1,500 mm, 0 kW Straight element: 5,000 mm, 0.55 kW Straight element: 10,000 mm, 55 kW 180° curve: 5,267 mm, 0.36 kW Straight element: 10,000 mm, 55 kW Dcjliqyxoukrvpjrog 180° curve: 3,556 mm, 0.18 kW 30° merge element: 1,500 mm, 0.55 kW CONTROL AND ELECTRICS - Thermal and electrical protection elements especially for electric motors - Control button with indicator light, main switch, Schneider Electric brand start/stop control button - Operating pedal - Frequency inverter for motors - Sensors for product detection in the curved area - Does not contain any other automation elements (PLC, specific automation software)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 25,386 h, Functionality: fully functional, Sliding headstock automatic lathe with counter spindle (C-axis) and with 3 XYZ turrets, each with B correction axis TECHNICAL DETAILS Spindle speed: 5000 rpm Z-axis: 1600 mm rapid traverse: 60 m/min Workpiece length: 250 mm Workpiece diameter: 65 mm Workpiece weight: 3 kg Number of turrets: 3 Main spindle Spindle capacity: max. 66 mm Chuck diameter: 140/160 mm Spindle diameter: 110 mm Spindle index: 2.5° Spindle speed: 5000 rpm Spindle power 100/40 %: 20/27 kW Torque 100/40 %: 105 / 145 Nm Counter spindle Spindle capacity: max. 66 mm Chuck diameter: 140/160 mm Spindle diameter: 110 mm Spindle index: 2.5° Spindle speed: 5000 rpm Doliqstphqpjyxrjcg Spindle power 100/40 %: 20/27 kW Torque 100/40 %: 105 / 145 Nm Turret 1 / 2 / 3 Number of tool positions: 12 Turning diameter: 500 mm Traverse path X / Y / Z: 110 / 70 (+40/-30) / 360 mm Rapid traverse X / Z: 25 / 12 / 45 mm Resolution: 0.1 µm B correction axis: ±1° Speed: 6000 rpm Power 25%: 8 kW Torque: 16 Nm

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2013, operating hours: 29,623 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,400 mm, fuel: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity: 15,000 kg Dslisuh Ucljqyxrscg Load center of gravity: 600 mm Lifting height: 5,500 mm Free lift: 2,800 mm Mast type: Duplex Fork length: 1,400 mm MACHINE DETAILS Length: 4,850 mm Overall width: 2,550 mm Overall height: 4,400 mm Dead weight: 23,580 kg Front tires type: Superelastic Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 EQUIPMENT - Sideshift - Tine adjuster - Heating system - Full cab - Full free lift

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-travel without gluing: 6,000 mm X-travel with gluing: 5,000 mm Y-travel: 1300 mm Dcjliqyxeuh Uxaerog Y-travel with main spindle + tool diameter 20 mm: 1630 mm Y-travel with gluing: 1450 mm Setup table: Dyna Poin BIMA 410 V Occupancy: 4 places Edge banding unit: available

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T33100-0636, Year of construction: 1996, operating hours: 21,419 h, load capacity: 16,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: standard, construction height: 3,650 mm, TECHNICAL DETAILS Machine type: Diesel forklift Load center: 900 mm Load capacity: 16,000 kg Mast and fork Mast type: Standard Lifting height: 3,700 mm Fork length: 2,180 mm Fork width: 350 mm Fork thickness: 75 mm Fork carriage width: 2,500 mm Tires Front tires type: Air Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 MACHINE DETAILS Drive type: Diesel Overall length: 5,200 mm Overall width: 2,550 mm Overall height: 3,650 mm Net weight: 22,220 kg Dcjlieulyhpsqyxrsg EQUIPMENT - Heating system - Full cabin

Condition: ready for operation (used), Functionality: fully functional, workpiece height (max.): 60 mm, TECHNICAL DETAILS Workpiece thickness range: 10 - 60 mm Control: CNI Panel height: max. 60 mm PVC/ABS thickness: 3 mm Feed speed: 25 m/min Motorized top pressure belt: Yes Pre-milling unit: Yes Magazine tape reel holder: Yes, with 6 positions Grooving unit: Yes Preheating unit for the plate with lamps: Yes Infeed guide: Manual Anti-adhesion unit: Yes Gluing system: EVA, premelter for EVA glue Softforming unit: Yes End cutting unit with automatic tilt control: Yes Dceljunkn Esiqyxrsg Glue stripper: Yes Buffing unit: Yes

Year of construction: 2018, operating hours: 1,256 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h Djliqyont T Auoxrjcg MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS Capacity: 3000 bottles/h Treatment time: 15.8 min Detergent quantity and concentration: 71 kg / 1.8 % Soaking tank volume: 3.983 m³ Soaking tank temperature: 70 °C Volume of rinse tank: 0.781 m³ Temperature of rinse tank: 40 °C Heating system: Steam, 6 bar Water consumption: 3.31 m³ Water pressure: 2 - 3 bar Dceliqyxotzcrvorsg MACHINE DETAILS Machine dimensions: 5,365 x 3,110 x 2,875 mm Weight: 8.3 - 13.83 t Voltage: 400 V, 50 Hz Power consumption: 23 kVA Noise level: 85 dBA

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2002, operating hours: 7,355 h, load capacity: 5,000 kg, lifting height: 5,950 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fuel: electricity, TECHNICAL DETAILS Drive: electric Load capacity: 5000 kg Load center of gravity: 700 mm Lifting height: 5950 mm Deliqyxotwdmuorjcg Free lift: 1900 mm Mast type: Triplex Fork carriage width: 1,250 mm Telescopic forks: 165 x 70 x 1,400 / 2,400 mm Platform height: 850 mm MACHINE DETAILS Length: 4500 mm Construction width: 2200 mm Overall height: 2860 mm Front tires type: Superelastic Front tires size: 27x10-12 Rear tires Type: Superelastic Rear tires Size: 27x10-12 Battery Volt: 80 V Charging capacity: 840 Ah Battery year of construction: 2015 EQUIPMENT - Fork positioner - Heating system - Full cab - Full free lift - loader

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, swivel angle A-axis (min.): -80 °, swivel angle A-axis (max.): 80 °, TECHNICAL DETAILS Travel X: 500 mm Travel Y: 350 mm Z travel: 250 mm U-/V-axes: ± 80 x 80 mm Workpiece size X: 960 mm Workpiece size Y: 670 mm Dcjliqyst Tbugexrsg Workpiece size Z: 245 mm Workpiece weight: 850 kg Wire threading: automatic Taper: 15° at 120 mm height Control: LN2W

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2015, operating hours: 15,384 h, load capacity: 16,000 kg, lifting height: 4,610 mm, fuel type: diesel, mast type: standard, construction height: 3,160 mm, fork carriage width: 2,650 mm, total length: 5,520 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 16,000 kg Center of gravity: 1,200 mm Mast: Standard Mast height: 3,960 mm Lifting height: 4,610 mm Dcoljtwphqjiqyxrog Fork carriage width: 2650 mm Fork positioner: 700 / 2350 mm Forks: 350 x 75 x 1700 mm MACHINE DETAILS Engine: Diesel Weight: 24,140 kg Tires: Pneumatic 12.00-20 Length: 5,520 mm Width: 2,520 mm Forklift height: 3,160 mm EQUIPMENT - Sideshift - Cabin - heater - Scales

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, TECHNICAL DETAILS Travel X: 350 mm Travel Y: 250 mm Z travel: 300 mm C-axis: available Delijt Tbiwoqyxrocg Table size X: 500 mm Table size Y: 400 mm Workpiece weight: max. 500 kg Electrode changer: 16-fold EQUIPMENT - Extinguishing system kraft & bauer

Year of construction: 2019, operating hours: 1,370 h, Condition: excellent (used), Functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm Dceljnt T Afsiqyxrsg tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Condition: new, Year of construction: 2022, Functionality: fully functional, laser power: 1,000 W, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 8 mm, sheet thickness brass (max.): 2 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Travel X / Y / Z: 3048 / 1524 / 120 mm Speed: 100 m/min Sheet weight: max. 900 kg Positioning accuracy: ± 0.05 mm/m Repeat accuracy: ± 0.03 mm Cutting head: Bodor Genius Laser source: Bodor Thinker Control: Bodor Thinker Laser power: 1kW Sheet thickness steel: 8 mm Sheet thickness stainless steel: 4 mm Dcoliqyxoumu Duoreg Sheet thickness aluminum: 3 mm Brass sheet thickness: 2 mm MACHINE DETAILS Dimensions: 4955 x 2280 x 2200 mm Weight: 7500 kg Power: 23.4 kW

Year of construction: 1989, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS Swing diameter: up to 2800 mm face plate diameter: 2500 mm height under crossbeam: max. 2200 mm workpiece weight: max. 15.000 kg Support: 2 x vertical, 1 horizontal MACHINE DETAILS Dcoliqsmxkzasyxrjg main drive: approx. 55 kW Total weight: approx. 56 t

Condition: good (used), Year of construction: 2011, operating hours: 11,931 h, Functionality: fully functional, machine/vehicle number: H-S30146, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, spindle nose: BT40, TECHNICAL DETAILS X-travel: 762 mm Y-travel: 510 mm Z-travel: 610 mm Spindle speed: 10000 rpm Spindle taper: BT40 Spindle power: 11/15 kW Control: Winmax Table size: 1020 x 510 mm Table load: max. 1350 kg MACHINE DETAILS Weight: 4900 kg Dimensions: 2300 x 2400 x 2600 mm Spindle hours: 11,931 h Switch-on hours: 29,200 h EQUIPMENT - Coolant system - Chip conveyor - Software options as shown in the pictures Dcjljudbw Ujiqyxreg - USB connection

Condition: used, Functionality: fully functional, Year of construction: 2000, operating hours: 4,990 h, TECHNICAL DETAILS Length: 8000 mm Overall width: 2780 mm Overall height: 3320 mm Dead weight: 19000 kg Loading shovel width: 2800 mm Technical condition: poor Front tires type: Air Front tires size: 23 5-25 Rear tires Type: Air Rear tires Size: 23 5-25 EQUIPMENT Heating system Deliqstwn T Eoyxrjcg Full cabin

Condition: good (used), Year of construction: 2011, operating hours: 20,962 h, Functionality: fully functional, machine/vehicle number: M342U-16103011AHAA, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,054 h, swivel angle A-axis (min.): 30 °, swivel angle A-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis simultaneous vertical machining center Dceliqyjt Hr I Rexrjg TECHNICAL DETAILS Travel X x Y x Z: 762 x 508 x 520 mm A-axis: 30/110° C-axis: 360° Spindle speed: 12000 rpm Control: Winmax Table diameter: 245 mm rapid traverse: 35,000 mm/min Spindle taper: BT40 Number of tool positions: 24 pieces MACHINE DETAILS Connected load: 26 kVA Operating voltage: 400 V, 50 Hz EQUIPMENT - 4/5-axis rotary/tilting table - Chip conveyor - Coolant tank - Spindle cooling unit - Software options as shown in the pictures

Condition: good (used), Functionality: fully functional, Year of construction: 2005, operating hours: 22,793 h, load capacity: 6,000 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: standard, construction height: 3,930 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 6000kg Load center: 600 Lifting height: 5900mm Length: 3300mm Overall width: 1900mm Dsliqyxstwn Hxsrscg Overall height: 3930mm Dead weight: 10520kg Mast type: Standard Fork length: 1140mm Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic

Condition: reconditioned (used), Functionality: fully functional, Partially overhauled conventional universal grinding machine - machine has been rebuilt, new geometry, all necessary parts have been renewed, new paintwork, with many accessories, with internal grinding spindle. With 6 months warranty. TECHNICAL DETAILS Grinding length: 1000 mm Center height: 175 mm Sanding diameter: max. 350 mm Djliqyott I U Nexrjcg Grinding wheel diameter: 400 mm Control: conventional MACHINE DETAILS Total power requirement: 8 kW Weight of the machine: approx. 4.5 t

Condition: used, Functionality: fully functional, Year of construction: 1998, operating hours: 9,653 h, TECHNICAL DETAILS Load capacity: 18000kg Load center of gravity: 600 Lifting height: 3660mm Dcoliqyxstrfrforog Free lift: 805mm Length: 3800mm Overall width: 1770mm Overall height: 3400mm Dead weight: 22500kg Mast type: Standard Fork length: 1800mm MACHINE DETAILS Transmission: Hydrostat Engine: Perkins Front tires type: Bandages Rear tires type: Bandages

Condition: good (used), Year of construction: 1998, operating hours: 15,814 h, Functionality: fully functional, 5-axis machine with simultaneous B + C axis TECHNICAL DETAILS Control: Heidenhain Millplus Traverse paths X / Y / Z: 500 / 420 / 380 mm Spindle speed: 8000 rpm Tool holder: SK40 spindle taper Tool magazine: 24 places (2 x 12 places) NC rotary table diameter: 500 x 380 mm Table load: 200 kg Feed X, Y, Z: 10,000 mm/min Rapid traverse X, Y, Z: 30 m/min Doliqyjtt I T Sjxrocg MACHINE DETAILS Weight: approx. 4,000 kg Connected load: 28 kVA Operating voltage: 400 V, 50 Hz Switch-on time: 42,971 h Operating voltage: 15,814 h EQUIPMENT - Machine supports - Coolant device - Heidenhain linear scales