Second-hand machinery for sale (2,406)

Condition: good (used), Information: Doln E Sowha Hts Hvocg - 40-foot PW Super High Cube - Exterior dimensions: approx. 12192 x 2500 x 3250 - Interior dimensions: approx. 12114 x 2430 x 2963 - Capacity: 90.1 m³ A 40-foot freight container with a special exterior height of 325 cm is being auctioned from Braunschweig. Loading is free of charge on site. Transport is only possible by low-loader.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 300-BK-501, volume flow: 8,505 m³/h, pressure (max.): 11.7 bar, Equipment: documentation/manual, Mayekawa-Mycom 400LUD-H Tail Gas Compressor (Unused 2022) Design flow rate (101.3kPaa & 0⁰C) wet 8,023 Nm³/h 9,280 kg/h 359.5 kmol/h Maximum flow rate (101.3kPaa & 0⁰C) wet 8,505 Nm³/h 9,838 kg/h 391 kmol/h Inlet pressure 0.025 MPa g at 24.4⁰C Outlet pressure 1.171 MPa g at 90⁰C 4 years spare parts Deln Eowf Nnuo S Hvecg Commissioning parts 11 pallets lube

Condition: used, Year of construction: 2001, 1 SEER MAC TCO 32 pillar drill press with various accessories, 400 V, 50 Hz, see photos and inspection Color: gray Year of manufacture: 2001 Machine number: 011735 Approx. weight in kg: 370 Condition: used Dcelnewf Dx Is E S Hvsg

Condition: used, 1 guillotine shear, Schechtl type MSB 300/NC, year 1982, serial no. 7119, max. sheet thickness 2.5 mm, working width approx. 2,500 mm Dslewg D Rgen E S Hvscg

Condition: good (used), Year of construction: 2016, The award requires approval! Dcjljwhawxen E S Hvjg

Condition: new, Year of construction: 2021, eading Bakery Systems 3-Pass Drying Oven (Unused 2021) Capacity estimate: 1800kg/h at 3% final moisture of product Connected Power 30,8kW/68A; 3x400V/50Hz Heating power 586kW; natural gas Specifications 1.0 Baking and Drying 1.1 (1) Incline Conveyor: 500mm (20in) wide x 4m long • Single belt incline conveyor transports dough chunks to forming machines • Stainless steel frame and troughed slider bed with removable side walls • Mobile frame for ease of sanitation; Urethane belt; Quick release nose Flat infeed section Flat discharge section Flighted plastic belt - UniChains brand. 1.2 (1) Dough Reciprocation Conveyor: 400mm (16in) wide x 2m long • Single thermoplastic belt conveyor reciprocates to feed a dough hopper • Fixed position stainless steel frame & slider bed with removable side walls • Direct driven variable speed reciprocation to maintain hopper level 50 cm conveyor width with UniChain brand high-temp modular belt Conveyor guide rails. 1.3 (1) Spectrum Triple Pass Drying System - 2000mm (80in) wide x 12m (40ft) long • For the drying of baked snack products in a 3 pass convection air process • Three separate conveyors with two temperature control zones • Zone 1: Downflow air pass 1; Zone 2: Upflow pass 2 - Downflow pass 3 • Product dries in a bedded stack at low temperatures for 15-60 minutes Djln E Sewf Iqus Hvscg • Dryer air temperature control range is 100°C (210°F) - 170°C (350°F) • Three Stainless Cleatrac Wire Belt Conveyors driven separately • Aluminized steel interior wall, floor, ceilings and air plenums • Stainless exterior with painted carbon steel frame; Large cleanout doors • Separate zone blowers control the air volume, exhaust and combustion • Two Honeywell / Eclipse Combustion Burners fitted for natural gas Stainless steel base frame to replace painted carbon steel; 3m each European CE Oven Zone package - flame safety, blowers, wiring Dryer Discharge Conveyor; high temperature urethane belt; non-inclined Dryer belt - compact grid by Wirebelt Corp (84 m) Gentle product transitions. 2.0 Process Control Automation (1) Allen Bradley PLC Control System • PLC based system to control equipment functionality • Operator Interface Terminal used to provide operational parameters • Ethernet connectivity to allow remote access • Safety devices used to protect operating personnel • Overcurrent devices used to protect electrical devices and wiring • Allen Bradley based components • Enclosure temperature monitoring and control • All electrical devices prewired within enclosures and junction boxes (1) Allen Bradley CompactLogix PLC (2) Carbon steel electrical enclosure (1) Allen Bradley Panelview Plus 10in (1) CE conformity of the controls system (1) Remote Connectivity VPN (1) Wire Harness and Wireway Please note that the pictures displayed were taken at the OEM before packing. The machines is still in the original packing.

Condition: used, Year of construction: 1994, 1 ERMAKSAN AP 3600x160 press brake Delnewf Dxnj E S Hvjcg Counter backgauge is defective, 16mm die opening has a crack, with 30° knife, bending length 360cm, max. stroke 180mm, max. pressure 1000kN, self-disassembly Color: gray Year of manufacture: 1994 Dimensions L/W/H: 380x200x260cm Weight in kg approx.: 12000 Condition: used

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12056, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Djlswg D Raon E S Hvecg

Condition: used, Leko LEKO-FE4-02-A2 Chocolate Cone Folding Machine The folding machine is a cam-controlled packaging machine in gantry design. Peel off the foil from the roll. Tightening of the folding roundels in three panels, residual cut roll-up, folding of the cone bags. Dcoln E S Hjwf I Dbjvsg The closure of the sachets can be done by sealing or by screwing in and then calibrating the cone bags, direct transfer to the casting moulds insertion station machine.

Condition: used, Year of construction: 1990, 1 ATLANTIC ATS 3006 Hydraulic Guillotine Shear Max. cutting length 350 cm, steel up to 6 mm, stainless steel up to 3 mm, self-disassembly Color: gray Dcjlewf Dwdsn E S Hveg Year of manufacture: 1990 Dimensions (L/W/H): 360 x 230 x 160 cm Weight in kg approx.: 4500 Condition: used

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12054, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Deln E S Hswg D N Aovscg

Condition: used, Year of construction: 2022, Wipotec HC-A-2000-2 Checkweigher and Metal Detector Delewf Izgen E S Hvecg Gross weight range: 750g Working direction : R>L Working height: 900-1050 Conveyor infeed : 900 x 120 mm Conveyor outfeed : 900 x 120 mm Rejection : power air blast (x2) Pieces per min : 120-240ppm

Condition: used, 1 x MUBEA HIW 750 Flat Angle and Bar Shear Dcelnswf Dvys E S Hveg with notching device and various tools, see pictures and inspection, self-assembly Color: gray Dimensions L/W/H: 300x170x170cm Weight in kg approx.: 1830 Condition: used

Condition: used, 1 extraction system, Kemper type 91, built approx. 2015, with piping Delewg D Nisn E S Hvocg

Year of construction: 2017, Condition: used, Ishida IX-GA-B3043 X-Ray Inspection System Djln E Sowf Itve Hvecg Bottle Inspection System. // Products include PET Bottle, Drinks Carton & Stand Pouch // Inspection maximum width = 150mm, height = 310mm // Speed12-45 m/min 10Kg Condition: Good Dimensions: L1685.00 X W1550.00 X H2260.00 Millimeters

Condition: used, Year of construction: 2004, 1 x HEBÖ RBV 12 pipe drilling machine Dceln E Sowf Ducj Hvsg with various accessories, see pictures and inspection Color: blue/gray Year of manufacture: 2004 Condition: used

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 3250, Lagun type FBF 3250, control system Lagun CNC, T-slot clamping table approx. 700 x 3,250 mm, travel paths approx. X: 3,000 mm, Y: 940 mm, Z: 1,000 mm, swiveling milling head Dcsln E Sjwg D I Eo Hvjg

Condition: used, Mix ET121/101 Horizontal Mixer V: 1120L Delewf Ixlen E S Hvjcg ATEX 20 (i),22 (22) SS304 Electrical: 380V - 50Hz Dimension: l 2700mmx w 1000mm x h 200mm Condition: Very Good

Condition: used, 1 MEBA SWING 260 DG-HS horizontal metal band saw Deln E Sowf Dnpj Hvscg with digital roller conveyor, minimum quantity lubrication, 5 roller stands, roller conveyor dimensions 450x40x92cm, self-disassembly Color: gray Dimensions L/W/H: 80x120x130cm Condition: used

Condition: used, 1 x 3-axis CNC machining center Hurco type VMX 64, serial no. 0-7056, year of manufacture 01, T-slot clamping table approx. 600 x 1,600 mm, travels approx. X: 1,650 mm, Y: 850 mm, Z: 760 mm, control system Hurco, type Ultimax, 2 hydraulic clamping vices, 1 magnetic clamping plate Deln E S Howg D Hnsvjcg

Condition: used, Bauermeister TB910/101 Grinding Station UMT 3.3 max flowrate:2000kg/h air pipe (i) diam.204mm, air pipe (o):204mm Dcelnewf Ivdo E S Hvsg filter DCE, Elektror fan SS304L total h.:2029, l.2240,w.1190 Condition: Very Good

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Djln E S Hswg D Eqjvjcg

Condition: used, 1 x 3-axis CNC machining center Hurco VMX 42, Hurco type VMX 42, serial no. M442-06201072CFA, T-slot clamping table approx. 600 x 1,300 mm, travel X: 1,060 mm, Y: 610 mm, Z: 610 mm, control system Hurco, type Ultimax, with chip conveyor Dcelewg D Edjn E S Hvsg

Condition: used, Year of construction: 2004, Soraluce type SP 10000, Heidenhain TNC 426 CNC control, serial no. 8701, year of manufacture 2004, travels approx. X: 8,500 mm, Y: 2,000 mm, Z: 1,200 mm, table size approx. 10,000 x 1,100 mm, total weight approx. 31,500 kg, automatic indexing milling head, 2-stage ZF gearbox, 60-station tool changer, horizontal and vertical tool change, 2 coolant systems, frequency-controlled high-pressure pump, chip conveyor, operator platform, etc. - ATTENTION: Difficult pickup conditions (crane required) Deln E S Howg D Dtjvscg Prior consultation or attendance at the viewing appointment is therefore strongly recommended.

Condition: used, Year of construction: 2008, Soraluce type FL-8000, year of manufacture 2008, serial no. 7854, Heidenhain CNC control, travels approx. X: 7,500 mm, Y: 1,400 mm, Z: 1,000 mm, table size approx. 8,000 x 2,000 mm, total weight approx. 18,300 kg, 40-station tool changer, max. tool weight 20 kg, automatic indexing milling head, cooling lubricant system 2 with internal cooling lubricant supply, tank volume 500 l + 250 l lifting tank and pump, variable frequency-controlled high-pressure pump, mobile operator platform, chip conveyor, work table field 9,000 x 2,000 x 300 mm, radio measuring touch system M&H 20.41, measuring station TT 140, etc. Dcjlnswg D Dae E S Hvjg