Second-hand machinery for sale (2,359)

Condition: used, Year of construction: 2011, Hurco VMX30M Vertical Machining Centre. S/No. S342-16102081DJA (2011) Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dobowhn Acsu Tg Ameut

Condition: repair required (used), Functionality: limited functionality, fuel type: diesel, color: orange, operation weight: 1,700 kg, Year of construction: 2020, operating hours: 162 h, machine/vehicle number: 20211600452, Operating hour meter: 162mth Engine power: 17.8kW (2800rpm) Engine: KUBOTA D1105-EF03 1.1L, serial no. 1LV1178, Year of production: 2020 Duebu Tg Aotqdpdjmot Fuel type: Diesel Starter: electric Centrifugal force: 72kN Vibration frequency: 42Hz Outer width of drum: 850mm Drum diameter: 573mm + Akerströms radio remote control, type MC11-OPS. The motor starts for a few seconds and shuts off.

Condition: good (used), Year of construction: 2014, operating hours: 17,300 h, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, spindle bore: 26 mm, TECHNICAL DETAILS Control: Mitsubishi Duebu Tjwhmrcsg Amet Main and counter spindle diameter: 20 mm Spindle bore: 26 mm Maximum machining length for long turning: 200 mm Maximum machining length for short turning: 50 mm Main spindle speed: 10,000 rpm Counter spindle speed: 8,000 rpm Rear side machining Rear block: with Y-axis Stations for rear side machining: 8 units Deep hole drilling stations on counter spindle: 6 units MACHINE DETAILS Operating hours: approx. 17,300 h Bar loading magazine: FMB Turbo 2-20 EQUIPMENT - Conversion kit D20 - Müller CL3 high pressure system with 8-way switchable valves, 130 bar, and automatic backwash filter - Automatic fire extinguishing system Kraft + Bauer included Fire damper - Angle-adjustable driven holder 3-way

Condition: good (used), Functionality: fully functional, Year of construction: 2008, operating hours: 5,262 h, power: 42 kW (57.10 HP), lifting height: 25,600 mm, fuel type: diesel, load capacity: 230 kg, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 25.60 m Debu Tewhlgljg Amout Lateral outreach: max. 16.20 m Load capacity: max. 230 kg Swivel range: 360° Work basket dimensions: 0.80 x 1.80 m Drivetrain Engine: Deutz Fahr Power: 42 kW Fuel: Diesel Chassis Travel speed: max. 4.5 km/h MACHINE DETAILS Length: 12.00 m Width: 2.38 m Height: 2.67 m Total weight: 15,950 kg

Condition: used, Functionality: fully functional, loading space length: 9,120 mm, Former container hall, floor space approximately 150 m², consisting of seven container shells, lined with sandwich panels on the inside and partially equipped with electrical installations. Already dismantled into individual containers with the following scope of delivery: five 30-foot high-cube shipping containers without side walls, dimensions: LxWxH approx. 912 x 245 x 290 cm, one 30-foot high-cube shipping container with one side wall, dimensions LxWxH approx. 912 x 245 x 290 cm, and one 30-foot high-cube shipping container halved with one side wall, dimensions LxWxH approx. 912 x 120 x 290 cm. Duebjv Invweu Tg Amjt

Condition: used, Sollich TT 5300D Tempering Machine Duobswf Iwhsu Tg Amot Capacity: 100 to 19.000 kg/h Condition: Fair

Condition: used, Year of construction: 2017, Hurco VM5i Vertical Machining Centre. S/No. S5-1610487CKLAH (2017) with Minmax Mill Control, 16 Position ATC, Table Size 455 x 355mm, 10k Spindle, Spindle Taper SK40 Duobu Tewhnz Eeg Amet Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 395.900.219.1140, workpiece weight (max.): 1,000 kg, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,000 mm, input voltage: 400 V, rapid traverse X-axis: 600 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, tank capacity: 750 l, Equipment: documentation/manual, X, Y, Z axis travel: 600 x 400 x 400 mm Min./Max. distance table - chuck: 190-590 mm Min. surface roughness Ra 0.1 μm Dielectric tank capacity 750 l This machine is dismantled and ready for transport. Duebu Tevq I I Ssg Amst

Condition: used, This scaffolding is being auctioned online in our industrial auction/machinery auction, Pieger Roof + Wall, which includes roof tiles, gutters, bending machines, tools, roofing accessories, and heavy-duty shelving. Dujbu Tewhc Umog Amst You can find these and many other items on our platform.

Condition: good (used), Functionality: fully functional, Year of construction: 2016, operating hours: 17,332 h, load capacity: 7,000 kg, lifting height: 4,150 mm, fuel type: gas, mast type: duplex, power: 72 kW (97.89 HP), No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift capacity: max. 7,000 kg Lifting data Lift height: 4,150 mm Dusbu Tg Aowhk D Ajmot Mast type: Duplex Fork length: 2,400 mm Drive & engine Fuel type: Gas Power: 72 kW (97.89 hp) MACHINE DETAILS Overall length: 6,100 mm Overall width: 1,940 mm Overall height: 3,230 mm Unladen weight: 12,060 kg EQUIPMENT - Hydraulically adjustable forks - Sideshift - Air conditioning - Heater - Full cab - Windshield wiper - LED front work lights - LED rear work lights - Rotating beacon - Single-pedal control - Dual gas tank

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 300-BK-501, volume flow: 8,505 m³/h, pressure (max.): 11.7 bar, Equipment: documentation/manual, Mayekawa-Mycom 400LUD-H Tail Gas Compressor (Unused 2022) Design flow rate (101.3kPaa & 0⁰C) wet 8,023 Nm³/h 9,280 kg/h 359.5 kmol/h Maximum flow rate (101.3kPaa & 0⁰C) wet 8,505 Nm³/h 9,838 kg/h 391 kmol/h Inlet pressure 0.025 MPa g at 24.4⁰C Outlet pressure 1.171 MPa g at 90⁰C Duobuswf Nnuo Tg Amot 4 years spare parts Commissioning parts 11 pallets lube

Condition: used, Year of construction: 2016, Hurco VMX30Mi Vertical Machining Centre. S/No. S343S-160466JKAAH (2016) with Winmax Mill Control, 30 Position ATC 10K Spindle, Spindle Taper SK40, Table Size 1020 x 510mm, Swarf Conveyor Duobuewhnzlo Tg Amst Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: repair required (used), Year of construction: 2017, high-pressure casting seat, used to make magnesium castings, which includes a group of devices, the most important of which are: 1. RAUCH heating furnace, year of manufacture 2016 x 2 2. REGLOPLAST heating and cooling device, man. 2017 x 2 3. SPECIMA SM 2 biaxial injector, year of manufacture 2017 x 2 4. Trimming press, man. 1986 (after reconstruction in 2017) x 2 5. KUKA robot, year of production 2017 x 2 6. BUHLER GDM-H-630-B injection molding machine, man. 1997, (after reconstruction in 2017) 7. BUHLER GDM-H-400 Djbu Tg Ajnmyqpemjut 8. 4 x Filters KMA

Condition: used, Year of construction: 2014, This Schechtl HT 310 press brake is being auctioned online in our industrial auction/machinery auction for Pieger Roof + Wall – roof tiles, gutters, bending machines, tools, roofing accessories, and heavy-duty shelving. You can find these and many other items on our platform. Dobu Tgjwhc T Ao Amout

Condition: new, Year of construction: 2021, eading Bakery Systems 3-Pass Drying Oven (Unused 2021) Capacity estimate: 1800kg/h at 3% final moisture of product Connected Power 30,8kW/68A; 3x400V/50Hz Heating power 586kW; natural gas Specifications 1.0 Baking and Drying 1.1 (1) Incline Conveyor: 500mm (20in) wide x 4m long • Single belt incline conveyor transports dough chunks to forming machines • Stainless steel frame and troughed slider bed with removable side walls • Mobile frame for ease of sanitation; Urethane belt; Quick release nose Flat infeed section Flat discharge section Flighted plastic belt - UniChains brand. 1.2 (1) Dough Reciprocation Conveyor: 400mm (16in) wide x 2m long • Single thermoplastic belt conveyor reciprocates to feed a dough hopper • Fixed position stainless steel frame & slider bed with removable side walls • Direct driven variable speed reciprocation to maintain hopper level 50 cm conveyor width with UniChain brand high-temp modular belt Conveyor guide rails. 1.3 (1) Spectrum Triple Pass Drying System - 2000mm (80in) wide x 12m (40ft) long • For the drying of baked snack products in a 3 pass convection air process • Three separate conveyors with two temperature control zones • Zone 1: Downflow air pass 1; Zone 2: Upflow pass 2 - Downflow pass 3 • Product dries in a bedded stack at low temperatures for 15-60 minutes • Dryer air temperature control range is 100°C (210°F) - 170°C (350°F) • Three Stainless Cleatrac Wire Belt Conveyors driven separately Dsbu Tg Aowf Iquomout • Aluminized steel interior wall, floor, ceilings and air plenums • Stainless exterior with painted carbon steel frame; Large cleanout doors • Separate zone blowers control the air volume, exhaust and combustion • Two Honeywell / Eclipse Combustion Burners fitted for natural gas Stainless steel base frame to replace painted carbon steel; 3m each European CE Oven Zone package - flame safety, blowers, wiring Dryer Discharge Conveyor; high temperature urethane belt; non-inclined Dryer belt - compact grid by Wirebelt Corp (84 m) Gentle product transitions. 2.0 Process Control Automation (1) Allen Bradley PLC Control System • PLC based system to control equipment functionality • Operator Interface Terminal used to provide operational parameters • Ethernet connectivity to allow remote access • Safety devices used to protect operating personnel • Overcurrent devices used to protect electrical devices and wiring • Allen Bradley based components • Enclosure temperature monitoring and control • All electrical devices prewired within enclosures and junction boxes (1) Allen Bradley CompactLogix PLC (2) Carbon steel electrical enclosure (1) Allen Bradley Panelview Plus 10in (1) CE conformity of the controls system (1) Remote Connectivity VPN (1) Wire Harness and Wireway Please note that the pictures displayed were taken at the OEM before packing. The machines is still in the original packing.

Condition: used, Year of construction: 2019, Hurco VM30i Vertical Machining Centre. S/No. S3014106919FKAAH (2019) Winmax Mill Control, 10K Spindle, 20 Position ATC, Spindle Taper SK40, Swarf Conveyor, Table Size 1320 x 510mm Dusbuewhnrqs Tg Amet Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 210802, fuel type: electric, The inner chamber measures 700mm x 700mm x 1000mm and is heated by an electrofusion wire spiral. It is insulated by ceramic fiber, and the overall dimensions of the unit are 1300mm x 1400mm x 1750mm Dusbu Tsuqi A Tog Amst Basic data: Power supply: 400V 3N~ 50Hz Rated power (kW): 18 Maximum temperature (oC): 1250 Chamber capacity (l): 490 Temperature control: 1-zone Uniformity of temperature distribution in the working chamber area: /- 2 oC Net weight (kg): 700

Condition: used, Year of construction: 2023, OAV Max 330 Edgebander. S/No. 23040002EB3N3 (2023). Country of Origin: Taiwan Duobujwhnkys Tg Amjt Please Note: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described.

Year of construction: 2021, Condition: good (used), Functionality: unexamined, machine/vehicle number: 10002157, Basic data: Production speed: 600 pcs/min Diaper size: S, M, L, XL Overall dimensions: 30m x 10m Net weight: 47508kg Main equipment elements: - cellulose roll unwinder feeding the cellulose mill; - cellulose mill; - drum filter with suction fan; - drum forming the absorbent insert from non-woven fabric and SAP; - assembly for receiving the insert from the forming drum, applying glue and performing the first press of the insert; Dujbjvrd S Nju Tg Amet - processing assembly designed for cross-cutting and piece-cutting the absorbent insert, connecting plastic foil, fabric, absorbent insert, rubber on the outside of the insert, elastic tape, front and rear wings, along with final pressing of all elements; - RITTAL TS 8206.500 control cabinets; - electrical cabinet (switchboard) - American Fan Company fan; - Cimme fan type GFJ H09010 E1 RD - 5 glue applicators - SAP dispenser - camera system - PLC control system - exhaust pipes Documentation: *machine user manual (copy), *CE Declaration of Conformity (copy)

Condition: used, Automatic Double Exit Sheeting Machine Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dujbu Tev U U Rzog Amet

Condition: good (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: NG4124682, Wet wipes production line Production speed: 80 packs/min. (72 pcs./package, 5760 pcs./min.) Number of nonwoven fabric unwinders: 12 pcs. Nominal power: 3kW Power supply: 460/277V 3Ph 60Hz Weight: 2000kg Overall working dimensions (without packaging machine): length: 9309mm height: 2961mm width: 4478mm Working units: -nonwoven fabric unwinders, -moisturizing section, -cutting section, -wipe stacking section Flow-pack thermoplastic film packaging machine Power supply: 480V ~3 50/60Hz Efficiency: 80 packs/min. Welding: longitudinal, transverse Equipment: -control cabinet; -McLean Cooling Technology air conditioner -1-phase EATON S84N11E03XCE power transformer, 3KVA. -Allen-Bradley 1500P Solid State control panel. Dobu Tgjvunmpj Amsut Documentation: -humidification section operating instructions (copy) -control cabinet wiring diagram -CLIPPER Rx100 line technical diagram

Condition: used, Year of construction: 2012, Agnelli Type A-540 Ravioli/Cappelletti Maker. Serial Number S902.052 (2012) Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Djbu Tgsv U U Iye Amout

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 1A08052, clamping force: 3,430 kN, screw diameter: 60 mm, clearance between the columns: 810 mm, displacement volume: 763 cm³, injection pressure: 220 bar, mold height (min.): 300 mm, ejector force: 60,000 N, ejector stroke: 270 mm, plate length: 770 mm, plate width: 770 mm, plate height: 700 mm, total length: 8,070 mm, total width: 1,930 mm, total height: 2,400 mm, heating capacity: 27.5 kW (37.39 HP), pressure: 200 bar, power: 85.6 kW (116.38 HP), type of input current: three-phase, Electric injection molding machine from Japan's TOYO Machinery & Metal CO. LTD. Model: Si-350-6S/JH750E (L/D 24) PACK version The PACK series is dedicated especially to packaging production. Basic data: Installed heating power: 27.5kW Total installed power: 85.6kW Control: SYSTEM 800, interface Euromap 67, Euromap 73 Total external dimensions L/W/H: 8073mm x 1930mm x 2397mm Duebetwcdfsu Tg Amst Short-circuit force: 3430kN Spacing between columns: 810mm x 810mm Table dimensions: 1050mm x 1050mm Table opening stroke: 700mm Mold height min/max: 300mm / 770mm Ejector stroke: 150mm Ejector force: 60.0kN Auger diameter: 60mm Injection speed: 300mm/s Injection pressure: 220MPa Compression pressure: 200MPa Theoretical injection volume: 763cm3 Injection: 848cm3/s PS injection capacity: 210kg/h Screw speed: 0-350rpm Injection stroke: 270mm Nozzle clamping force: 39.0kN

Condition: used, IMI Type 1500 Stainless Steel Pasteurizer Please Note: These lots are located in Preganziol, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Debu Tgjwakr Re Amsut

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 61014832, clamping force: 4,200 kN, screw diameter: 80 mm, clearance between the columns: 800 mm, plate width: 1,230 mm, plate height: 1,270 mm, power: 75 kW (101.97 HP), We offer you Krauss-Maffei 420-3000 CH injection molding machine. Dimensions of the mounting plate (H x W) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Minimum max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Rated power of pump motor [kW] 75 Rated power of barrel heating [kW] 29 Dimensions and weight (approximately) Dujbjrdfyhsu Tg Amst Own weight with control cabinet [t] 22.3 Dimensions (L x W x H) [m] 7.32 x 2.49 x 2.38 Machine disassembled, deposited in storage. In addition: WITMANN DFR-10 workpiece pickup robot (2010). MOTAN plastic feeder