Second-hand machinery for sale (2,474)

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 19631, grinding length: 1,500 mm, grinding width: 900 mm, grinding spindle speed: 1,000 rpm, controller manufacturer: Siemens, workpiece height (max.): 690 mm, The machine was completely overhauled and modernized in 2009 & 2023. In 2023, the X-axis, including the drive, was refurbished and new magnetic plates were installed! TECHNICAL DETAILS Grinding width: 900 mm Grinding length: 1,500 mm Grinding area: 1,500 x 900 mm Workpiece height: 690 mm Hfsdjx Dcfbopfx Ag Der Table size: 1,800 x 900 mm Longitudinal table speed: 4 - 36 m/min Cross table speed: 1 - 60 m/min Grinding wheel dimensions: 500 x 100 x 203 mm Grinding spindle speed: 1,000 rpm MACHINE DETAILS Control system: Siemens Electrical Data Voltage: 400 V Total drive power: 80 kW Grinding spindle drive: 28 kW Machine weight: approx. 17 t EQUIPMENT Coolant system Dressing device Automatic vertical feed

Condition: used, Year of construction: 2019, Dahlih MCH630 Horizontal Twin Pallet Machining Centre with Fanuc Series Oi-MF, Pallet Size 630 x 630mm, Travel (X/Y/Z) = 1000/850/800mm, B Axis = 1 deg Positioning, 6000rpm Spindle, Spindle Taper BT50, 60 Position ATC, max Table Load 1200kgs, Floor Space 4500 x 6230 x 3380mm, Machine Weight 18,000kgs. S/No. 3003020094 (2019) Hfedpfsx E Umpjx Ag Dor Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, Manufacturer: EXERON, Model: S 306 MF20/30, Year of manufacture: 2015, Serial No.: 306-0102, Control system: Exeron, Model MF20/30, Travel: 1,200 x 750 x 500 mm, Workpiece clamping table: 1,500 x 1,200 mm, Tank size: 1,550 x 1,250 mm, Fill height: 550 mm, Distance table/electrode holder: 300 - 800 mm, Max. workpiece weight: 4,000 kg, Linear scales in X/Y/Z axis, C-axis with direct measurement, Raising speed: 7.5 m/min, 8-position tool changer, gap filter system, control cabinet, cooling, CO² fire extinguishing system Hfedjx Dahaspfx Ag Djr This machine is part of an online auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, construction height: 2,300 mm, overall weight: 5,080 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 4,000 kg Lift height: 3,240 mm Overall height: 2,300 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: 6-cylinder LPG engine Front tires: 8.25-15 (70%) Rear tires: 7.00-12 (60%) Weight: 5,080 kg Operating hours: 7,068 h EQUIPMENT 3rd hydraulic valve Rear work lights Side shifter Hodpfjx E Tgzox Ag Dsfr

Condition: used, axle configuration: 3 axles, Year of construction: 2005, Empty weight: 8.450 kg Carrying capacity: 30.550 kg Hfodpfx Agsx E Tabs Dsr GVW: 39.000 kg Technical inspection expiration date: 2026 Auction item. Semi-trailer in working condition. Lifting front axle. Capacity about 50 cubic meters. Internal dimensions of the body: length 948 cm., height 218 cm., width 235 cm.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min Hsdpfx Agjx Dcb Nj Djfr MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Operating Hours Total operating hours: 84,857 h Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system

Condition: used, Year of construction: 2023, Dahlih DMX500 (4+1) Machining Centre with Fanuc Oi-MF Plus Control, Table Size 500mm (dia), Travel X/Y/Z=600/900/560mm, Max Spindle Speed 15000rpm, 40 Position ATC, 20 bar Through Spindle Coolant. S/No. 301302003 (2023) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Hfodpfox E Ulrjx Ag Dsr

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm Hjdpfex A U Ulsx Ag Djfr This machine is part of an online auction. Images will be provided later.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,746 h, load capacity: 2,500 kg, lifting height: 3,680 mm, construction height: 2,300 mm, overall weight: 3,820 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 3,680 mm Hodpfx Agex E Tdyo Dsfr Overall height: 2,300 mm Fork length: 1,100 mm MACHINE DETAILS Drive type: 4-cylinder LPG engine Front tires: 7.00-12 (70%) Rear tires: 6.00-9 (60%) Weight: 3,820 kg Operating hours: 11,746 h EQUIPMENT 3rd valve Front work lights Side shift

Year of construction: 2018, condition: used, Auction item. Hsdpfex E S U Rex Ag Defr Feed dispenser in working condition. Sold as seen in the photos.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, travel distance X-axis: 1,700 mm, travel distance Y-axis: 400 mm, controller model: Siemens 840 D, No reserve price – guaranteed sale to the highest bidder! The machine underwent a full overhaul in 2015 and was retrofitted with a Siemens 840 D CNC control system! TECHNICAL DETAILS Faceplate diameter: 2,000 mm Turning diameter over table: 2,200 mm X-axis travel: 1,700 mm Z-axis travel: 400 (+550) mm Stepless faceplate speed range: 0.28–160 rpm Center height over table: 1,140 mm Hodpfx Asx Db S Tsg Dofr Main spindle diameter: 285 mm Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Space required: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Hfsdpex E Ukhofx Ag Der

Condition: used, Year of construction: 2003, Manufacturer: DMG DECKEL MAHO, Model: DMU 125 P retrofit, Year of manufacture: 2003, Serial no.: 11180004143, Control: DMG, Travel X/Y/Z: 1,250 x 880 x 800 mm, Rotary/tilting CNC table 360 x 0.001°, Main spindle drive: 10 kW, Speed range: 20 - 12,000 rpm, Tool changer with 30 stations, Tool holder: HSK 63, Operating hours Run: 13,710 h / Load: 57,369 h, Chip conveyor: Blechtechnik, Skip with forklift receptacle, Belt filter unit: DMG, Accessories: various tool holders. Hsdpfox A U Thjx Ag Dofr This machine is part of an online auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,161 h, load capacity: 6,000 kg, lifting height: 3,430 mm, construction height: 2,860 mm, overall weight: 11,250 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lift height: 3,430 mm Overall height: 2,860 mm Forks: 1,200 mm MACHINE DETAILS Drive type: 4-cylinder diesel Front tyres: 355/65 - 15 (30 %) Rear tyres: 250 - 15 (70 %) Machine weight: 11,250 kg Operating hours: 8,129 h EQUIPMENT 3rd hydraulic valve Rear work light Front work light Heater Full cabin Operator's manual Hfsdpfx Asx E Tblog Der Spare parts catalogue

Condition: used, mileage: 1,277,253 km, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65R22.5 315/70R22.5, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Tyre size: 385/65R22.5 315/70R22.5 Engine capacity: 10.518 cc Empty weight: 7.675 kg Hodpfx Aex E S Uqjg Defr Carrying capacity: 10.325 kg GVW: 18.000 kg Technical inspection expiration date: 2026 Auction item. Truck in working condition. With hydraulics. Only the truck is for sale, the trailer is not for sale together.

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Hedsx E Ugvjpfx Ag Dsfr Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2002, Manufacturer: DMG GILDEMEISTER, Model: DMU 160 P, Year of manufacture: 2002, Serial No.: 11220000223, Control system: Heidenhain, Model iTNC 530 (completely overhauled), Travel ranges X/Y/Z: 1,600 x 1,250 x 1,000 mm, Spindle speed: 18,000 rpm, Table dimensions: 1,250 x 1,500 mm, Tool changer: 60 positions, Tool holder: HSK 100, Rapid traverse: 60 m/min, Feed rate: 20 – 15,000 mm/min, Table rotation speed: 10 rpm, Operating hours: running 13,879 h / load 49,304 h, Oil mist extraction, Chip conveyor, Manufacturer: Blechtechnik, Model: DMU 160 P/U, Year: 2002, Band filter system, Manufacturer: Bürener Maschinenfabrik GmbH, Year: 2002, Model: KA980, Accessories package consisting of: telescopic drawer cabinet, 5 drawers, contents: various T-slot nuts, tool holders, clamps. This machine is part of an online auction. Hjdpfx Agox A U Sqs Dsfr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,971 h, load capacity: 2,000 kg, lifting height: 5,665 mm, free lift: 1,900 mm, construction height: 2,450 mm, Equipment: sideshift, TECHNICAL DETAILS Lifting capacity: 2,000 kg Lifting height: 5,665 mm Overall height: 2,450 mm Free lift: 1,900 mm Fork length: 1,000 mm MACHINE DETAILS Drive type: 4-cylinder LPG engine Hedsx E Tauepfx Ag Dofr Front tires: 200/50-10 (20%) Rear tires: 18x7-8 (60%) Weight: 3,515 kg Operating hours: 8,971 h EQUIPMENT 3rd hydraulic valve Rear work light Front work light Side shifter

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Hedox E Ubmjpfx Ag Dsfr Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Hfjdpfx Asx E T Npsg Dsr Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1996, Traub Type TNC 30 DGY CNC Lathe with Traub System TX 8F Control (1996) Hfodpjx E Tppsfx Ag Djr Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1996, Traub TNC 42 CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 14 Station ATC, Model TNC 42/65DGY, Collet Chuck, Swarf Conveyor. S/No. 413 (1996), IEMCA Type CNC Boss 542/32 Barfeed. S/No. 97012709 (1997) Driven Tooling Hedjx E Tmhjpfx Ag Defr Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1996, Traub Type TNC 30 DGY CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 12 Station ATC, Swarf Conveyor, Collet Chuck. S/No. 475 (1996), IEMCA CNC Boss 542 Barfeed. S/No. 97011301 (1997) Driven Tooling Hjdpex E Tivjfx Ag Dofr Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2018, Traub TNX 65 Sliding Head Machine with Traub System TX8i-S Control, Collet Chuck, FMB Turbo 5 - 65 Barfeed, Swarf Conveyor, Filtration System, Driven Tooling. S/No. 7060582 (2018) Hfjdpfxox E Th Ee Ag Dsr Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2018, Traub TNL 32 Sliding Head Machine with Traub System TX8i-S Control, (2) x 10 Station Turrets, Collet Chuck, Turbo 3 - 36 FMB Bar Feed, Swarf Conveyor and Filtration System, Driven Tooling. S/No. 6060446 (2018) Hodpex E Tf Rjfx Ag Djfr Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.