Second-hand machinery for sale (2,359)

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Working area: 3,000 x 1,500 mm Control system: Siemens Dujb Exsvi Iw Rswx Tst MACHINE DETAILS Machine weight: approx. 17,500 kg EQUIPMENT - Scraper alternating position control - Thread forming - Marking - fast beading - Slotting - Multishear - Multibend - Offset resetting - Roller tools - Set-up cassettes - Ball transfer table

Year of construction: 2023, Condition: like new (used), Functionality: fully functional, Powerful cooling system with Dorin piston compressors - condenser and evaporator for rapid cooling or freezing TECHNICAL DETAILS Machine type: DEEC 7000 Performance and capacity Cooling capacity: 33.840 kW Evaporation temperature: - 40 °C (at 45 °C UT) Voltage: 400 V / 3 ~ / 50 Hz Refrigerant: R452 Capacity: 7,000 kg/day Components Compressors: 2 Dorin 2S6000 piston compressors (1 compressor active, 2nd compressor can be switched on manually) Condenser: With 3 fans Diameter: 630 mm Dueb Exsvi H S Tewx Tot Evaporator: With 3 fans Diameter: 630 mm Fin spacing: 10 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,240 h, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 88 mm, travel distance X-axis: 340 mm, travel distance Y-axis: 70 mm, TECHNICAL DETAILS Control unit: Fusion 640 MT Turning diameter: 610 mm Turning length: 1,000 mm Spindle bore diameter: 88 mm Spindle speed: 0-3,500 1/min Spindle drive: 32 kW Face travel (X): 340 mm Y-travel: ±70 mm Longitudinal travel (Z): 1,000 mm Minimum indexing of the main spindle (C-axis): 0.001° Tool data Tool positions: 40 Spindle speed driven tools: 4,000 1/min Spindle motor driven tools: 4 kW Tool type: KM 63 Dob Esvi H E Tsxwx Teut MACHINE DETAILS Required floor space: 4 x 2.4 x 2.2 m Weight: 9.6 tons Operating hours spindle 1: 60,240 h Spindle 2 operating hours: 2,791 h EQUIPMENT - Chip conveyor - Jaw chuck with 315 mm diameter - Tailstock

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece height (max.): 40 mm, working width: 200 mm, working length: 3,200 mm, TECHNICAL DETAILS Machinable length: 200 - 3,200 mm Machinable width: 40 - 200 mm Workpiece height: max. 130 mm Depth with maximum mortise Ø 320 mm: 105 mm Tenoning carriage speed: 0 - 100 m/min Profiling speed: 3 - 15 m/min Tenoning 1st cross-cut saw: Power: 5.5 HP (4 kW) Saw Ø: 400 mm 2nd tenon cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available 3rd tenoning cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available Vertical positioning: With continuous axis 4th digital angle adjustment bracket: Available 5. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Double direction of rotation: Available Positioning: Vertical and horizontal with continuous axis Intervention (calibration): Time-delayed against vibrations 6. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Positioning: Vertical and horizontal with continuous axis 7. right router (profiling) Shaft: 50 x 320 mm Dujbovit E Ho Exwx Tot Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Positioning: Vertical and horizontal with continuous axis 8th restoration group Positioning: Vertical and horizontal with continuous axis Device: For pulling out the lock 9. lower horizontal shaft (groove) Positioning: Vertical and horizontal with continuous axis Power: 88.5 HP (66.4 kW) 10. digital guidance: available 11. return of the parts: To the operator

Condition: not inspected (used), Year of construction: 2004, Functionality: unexamined, HOMAG edgebanding and processing line, Debjrn Sl Io Exwx Teut KF 61/08/QA/25 edgebanding machine, KF-63/08/QE/15 edgebanding machine, Optimat TDL 310/25/12 turntable, year of manufacture 2004, L=25 m

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, Functionality: fully functional, power: 11 kW (14.96 HP), screw diameter: 250 mm, TECHNICAL DETAILS Materials: Wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw), animal feed and others Type: Complete system (compact system) Assembly: Built on a base frame Output: 180 kg/h (depending on raw materials and other factors, value here for softwood) Components Storage container: 4 m³ for raw material, including agitator Intermediate screw: Diameter 250 mm, for feeding the hammer mill Hammer mill: Drive power: 11 kW, for crushing raw material (e.g. wood chips) Dob Exovhbx Sowx Teut Slant mixer: For raw material, including level sensors and fully automatic moisture dosing Dosing container: For pressing aids (e.g. corn starch) Dosing screw: Speed-controlled, for optimal material feeding of the press Press: Drive power: 11 kW, with horizontal Round die, discharge chute, temperature monitoring and overfill protection Conveyor belt: For transporting the pellets away, discharge height: approx. 2.5 m Drum sieve: For dedusting and cooling the pellets Control system Type: Siemens PLC Operation: Touch display Monitoring: Permanent monitoring of all parameters with automatic shutdown in the event of problems Operational expansion Design: System is prepared for the operation of a second press EQUIPMENT The system includes a central control system, conveyor belt for pellet transport, drum sieve for cooling and dedusting, as well as components for material dosing and monitoring.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, center height: 150 mm, grinding length: 600 mm, grinding wheel diameter: 152 mm, grinding diameter: 300 mm, grinding wheel width: 50 mm, spindle speed (max.): 1,545 rpm, TECHNICAL DETAILS Control system: Fanuc 18i-TA Sanding diameter: 300 mm Sanding length: 600 mm Center height: 150 mm Workpiece data Maximum workpiece weight: 150 kg Dusb Eevhbumjxwx Tjt Grinding wheel Dimensions: 405 x 152.4 mm Grinding wheel width: 25 - 50 mm Grinding spindle speed: infinitely variable 1,545 rpm Grinding spindle motor: 3.7 kW MACHINE DETAILS Machine weight: approx. 3.1 t Space requirement: approx. 4 x 3 x 2.5 m

Condition: good (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 21060055, working width: 1,005 mm, number of print heads: 2, working height: 1,005 mm, working length: 1,005 mm, HIGHLIGHTS - Award-winning industrial design - open and safe frame construction -modular and independent extruder - semi-automatic leveling of the print bed - large print area - spacious and flexible spool holder - simple and intuitive user interface TECHNICAL DETAILS build volume: 1,005 x 1,005 x 1,005 mm Layer thickness resolution: 0.1 mm - 1.4 mm Acceleration: Up to 400 mm/s Printing technology: FFF (Fused Filament Fabrication, FDM) Printing system with two extrusion heads Extruder: 0.6 mm Print nozzle diameter: 0.6 mm to max. 2.0 mm Print bed temperature: max. 80 °C Support material: PVA Materials used BigRep material: PLA, PETG, Pro HT, Pro HS, TPU MACHINE DETAILS Printer weight: approx. 460 kg Size (WxDxH): 1,850 x 2,250 x 1,725 mm Operating voltage: 208 V - 240 V Amperage: 16 A Frequency: 50/60 Hz Dujb Exsvg D Awjwx Tot EQUIPMENT - Frame construction - Open, stable construction for industrial use - Modular extruder - Two units - BROne.3 camera kit - Slicing software Data according to manufacturer

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 130145-22, product height (max.): 200 mm, product height (min.): 50 mm, product length (max.): 80 mm, product length (min.): 25 mm, product width (max.): 80 mm, product width (min.): 25 mm, The original price was EUR 290,000 TECHNICAL DETAILS Machine type: Fully automatic horizontal cartoning machine Format size: 600 mm diameter Folding cartons per minute: 50 (assuming continuous product flow) Changeover time: 30 minutes Good production: > 99 % Work stations: 6 Number of folding carton formats: 5 Folding carton closure: Push-in closure (top and bottom) Dob Exwxovgw T Ae Tout Format range A dimension: 25 - 80 mm B dimension: 25 - 80 mm H dimension: 50 - 200 mm Product feeding Method: Fast clip process Automatic feeding: For tubes into the synchronized feeding belt Feeding device: Indexed cassette conveyor (3,000 x 150 mm) Leaflet feeder: For pre-folded leaflets (AV + AH version) Process steps 1) Product transfer: Tubes are transferred from an upstream tube filling machine. 2) Transport: A conveyor system transports the tubes to a stepped storage area and pushes them into the product compartment of the indexed infeed conveyor. 3) Insertion: The infeed conveyor transports the tubes into the cartoning machine. 4) Package insert: Tube and package insert are pushed in together. 5) Package insert form: The package insert is folded into a U-shape and placed around the tube. Work stations within the cartoner Station 1: Removal of the folding carton from the magazine and erection in the format belt, folding of the rear side flaps. Station 2: Inserting the product and leaflet into the carton. Station 3: Folding the front side flaps and blind embossing the rear flap. Station 4: Closing the box. Station 5: Removing the folding carton from the format wheel. Station 6: Empty station for changing the format cassette. Process steps after the cartoner Conveyor system: Folding cartons are conveyed out of the machine by a clamping conveyor system. Transport: The cartons are transferred to a flat conveyor belt (200 mm wide) by a pneumatic pusher. EQUIPMENT - Robust, rust-free construction with aluminum parts and stainless steel design - Safety equipment: All machine openings are protected with circuit breakers - Machines comply with the applicable CE directives. - Conveyor belts

Condition: excellent (used), Year of construction: 2021, operating hours: 505 h, Functionality: fully functional, machine/vehicle number: DW126K - 42, The multitool - breaking, crushing, feeding, dosing, cutting, bag opening, dissolving HIGHLIGHTS - Universal single-shaft shredder for smaller volume flows and special batches - Flexibly adaptable and unrivaled versatility - BROADEST APPLICATION SPECTRUM IN ITS CLASS - Hydraulic direct drive for on-demand performance and interference-resistant operation - Economical and ecological diesel engine - Robust, durable components - Low operating costs - The entire shredding system can be changed directly on site in just 45 minutes - Bolt-on tools for quick tool replacement using the patented Dopp-Lock® system - HydraulicDirect Drive for demand-oriented performance and highly interference-resistant operation - smart handling throughout - impressive simplicity in design, maintenance and operation TECHNICAL DETAILS Duob Ejvgwbysxwx Tjt Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 hp) Emission standard: Stage V Tank capacity: 300 l Roller Diameter: 600 mm (L) Speed: 33 rpm Number of teeth: 8 Feed hopper Loading height: 3,124 mm Rear conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: Adjustable from 1 m/s to 4 m/s MACHINE DETAILS Total weight: 16,300 kg Chassis: crawler chassis, 2 speeds, 400mm 3-web Working position Length: 11,293 mm Width: 2,545 mm Height: 4,184 mm Transport dimensions Length: 7,820 mm Width: 2,545 mm Height: 3,231 mm EQUIPMENT - Electro-hydraulic pump, for operation when the engine is at a standstill - Auxiliary hydraulics 70 l/min - Size L shredding package - Overbelt magnet - Large radio remote control - Maintenance-friendly engine compartment with LED light - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange - Quick roller change system on the roller - Quick-change roller system on the machine

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, HOMAG single-sided edge banding machine type KL39/9C/S 3D Dueb Exsrn Sp Sjwx Tet

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 4811/0816, TECHNICAL DETAILS Maximum width: 1000 mm Minimum length of the veneer strip: 350 mm Minimum width of the veneer strip: 45 mm Veneer thickness: 0.3 - 1.5 mm Djbotwcx Ae Exwx Tsut Adjustable feed speed: 20- 50 m/min Length of the heating surface: 1200 mm Temperature control: 0 - max. 220°C Height of the work table: 970 mm MACHINE DETAILS Total power: 9.3 kW Average power: 5 kW Feed power: 2.2 kW Heating guide: 0.46 kW Operating voltage: 400 V, 3 Ph, 50 Hz Fuse protection of the small circuit: Max. 32 A Compressed air connection: G 1/4''/ 9 mm Compressed air: 6 bar Compressed air requirement: approx. 30 NL/min Net weight: 2050 kg Required floor space: 2370 x 1969 x 1470 mm (1770 mm control cabinet height) Size of the transport package: 8.23 m3

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,980 h, Functionality: fully functional, working width: 1,300 mm, Wet deburring machine TECHNICAL DETAILS Working width: 1,300 mm Deb Exwevfpvyox Tjut Working height: 900 / 1,000 mm Sanding belt length: 2,620 - 3,250 mm Number of units: 2 (sanding belt + vertical brushes (XVS)) Pre-treatment: Drying + air pressure Mist extraction: available Control system: PLC VISION

Condition: good (used), Year of construction: 2008, Functionality: unexamined, working width: 5,000 mm, workpiece width (max.): 2,400 mm, workpiece height (max.): 8 mm, Equipment: documentation/manual, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! DESCRIPTION - fully automatic packaging machine - complex cutting functionality for creasing, cutting, creasing, punching and perforation in and across the running direction - Formation of carrying handles and holes possible - return fed corrugated board for further processing steps - unlimited number of packaging types and different products Condition: Machine functioned until dismantling. Due to the storage time, no statement is made on the functionality. Dueb Exwxot Taiio Tst TECHNICAL DETAILS Cardboard width: 27 - 240 cm Working width: 5.0 m Board thickness: 2 - 7.8 mm (E, B, C, BE, BC) Cardboard length: unlimited Number of corrugated cardboard sheets/magazines: up to 4 sheets Feed speed: 2 m/s Production output single production: 10 pieces/min Production output double production: 18 pieces/min MACHINE DETAILS Dimensions: 6.7 x 5.8 x 3.7 m Weight: 6500 kg Power: 3x400 VAC-480 VAC (16A) EQUIPMENT - Documentation - User manual - Maintenance history

Year of construction: 1979, Condition: refurbished (used), Functionality: fully functional, TECHNICAL DETAILS Height of centers: 125 mm + heights of 50 mm distance between centers: 1.000 mm Grinding wheel ' diameter: 400 mm ' width: 50 mm ' Bore: 127.0 mm angular displacement: 270 ° workpiece spindle head: 20 - 400 rpm taper of the spindle: 5 MT Taper in the tailstock: 3 MT Dobek H Hp Nj Exwx Tout table angular displacement: 8 ° Table speed: infinitely variable up to 6.0 m/min Internal grinding spindle with 60 000 rpm External grinding wheel motor: 4,0 kW Workpiece spindle motor: 1,5 kW Weight machine: 3.100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY - Machine was completely retrofitted - New control cabinet & new wiring diagram - New motor & frequency converter for the working head - 2 axes DRO - Cooling tank with paper filtering - Geometry made according to the Kellenberger protocol - Internal grinding spindle - Many accessories Please refer to the attachment below for a test report on the machine.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 25,355 h, Functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 5,000 rpm, bar diameter: 65 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control: Sinumerik 840 T Siemens X-axis: 210 mm Z-axis: 610 mm C-axis: 360 ° Swing diameter over bed: max. 540 mm Swing diameter over face slide: max. 360 mm Turning diameter: max. 310 mm Turning length: max. 520 mm Bar diameter: max. 65 mm Center width: 650 mm Main spindle Dusbeuuip Uo Exwx Tjt Speed range - main spindle: 60 - 4,200 rpm Drive power - main spindle: 18 / 15 kW Torque: max. 192 Nm Spindle head: DIN 55026 / KK6 C-axis: 0.001 ° Tool turret Positions: 12 Tool holder: VDI 30 DIN 69880 Driven tool stations: 12 slots Speed range - driven tool stations: 0 - 5,000 rpm Drive power - driven tool stations: max. 5 kW Torque - driven tool stations: max. 20 Nm Feed rates Rapid traverse speed: 24 m/min Feed force (X / Z): 5,000 / 7,000 N MACHINE DETAILS Machine weight: approx. 4.5 t Space requirement: approx. 4.9 x 2.5 x 2.0 m Total connected load: 20 kVA Switch-on hours: 48,262 h Automatic operation: 25,355 h Parts counter 1 / 2: 36,488 pieces EQUIPMENT - documentation - Chip conveyor - Coolant device - Tailstock - Collet chuck - Various tool holders, driven + static holders - Tool presetting (touch setter) - Bar loading magazine 3 m

Condition: good (used), DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. We provide disassembly and removal of machines from the factory hall. Dujb Exenvfmnswx Tjt For sale are 6 machines similar this one, and many more different machines from the shoe manufacturing plant.

Year of construction: 2016, operating hours: 4,901 h, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS turning diameter: max. 330 mm turning diameter: max. 210 mm turning length: 450mm Diameter of passage over facing slide: 260mm bar passage: 51 mm speed of rotation: 5000 rpm Control: Sinumerik 840 D ShopturnSiemens x-travel: 182,5 mm z-travel: 455 mm diameter of spindle bore: 68,5 mm spindle diameter in the front bearing: 100 mm Main spindle hydraulic chuck: Schunk ROTA NCKplus 210-52 spindle head: 140h5 output power 40% ED: 16,5 kW Output power at 100% load: 11kW Torque: max. 166.5 Nm rapid traverse in X and Z direction: 30 / 30m / min turret: 12 tools shank diameter: 30 mm tailstock movement hydraulic: 396mm Center taper: Mk 4 MACHINE DETAILS total power requirement: 21kW Dobol Ax T Ss Exwx Tjut machine weight: approx. 3,2t machine dimensions: approx. 4,5 x 2,5 x 2,0m Operating time: 11205 h Operating time: 4901 h Detail counter: 62408 pieces

Condition: new, Year of construction: 2021, Functionality: fully functional, sheet thickness steel (max.): 26 mm, roller (top) diameter: 290 mm, roller diameter: 210 mm, roller (bottom) diameter: 270 mm, bending length: 2,050 mm, TECHNICAL DETAILS Sheet thickness (max.): 26 mm Diameter of the roller (top): 290 mm Roller diameter: 210 mm Diameter of the roller (bottom): 270 mm Bending length: 2,050 mm MACHINE DETAILS Dobovfptre Exwx Tsut Dimensions: 4,103 x 1,623.2 x 1,540 mm Warranty period: 12 months Power: 18.39 kW (25.00 hp) EQUIPMENT - Documentation/manual

Condition: good (used), Year of construction: 2015, Functionality: unexamined, workpiece length (max.): 1,250 mm, workpiece width (max.): 270 mm, workpiece height (max.): 19 mm, No minimum price - guaranteed award to the highest bidder at the end of the auction Duobet H Nawo Exwx Tot BOTTERO Fully automatic horizontal double edging machine for small glass and louver glass, consists of: 1. infeed roller conveyor 2. single-sided edge bander TWO-B12 with 12 spindles 3. glass tipper with conveyor belts 4. single-sided edger TWO-B12 with 12 spindles 5. roller conveyor 6. transfer conveyor 7. double-sided edger TWO-B10 with 10 spindles per side 8. outfeed conveyor The line includes corner pullers Condition: Machine worked until dismantling. Due to the storage time, no statement is made on the functionality. TECHNICAL DETAILS Model: TWO-B12/TWO-B10 Construction: L-shaped line Glass dimensions: min. 45 x 250 mm Glass dimensions: max. 270 x 1250 mm Glass thickness: 3 - 19 mm Machine DETAILS Weight B10 / B12: 6.5 / 3.5 t Connected load B10 / B12: 36 / 36 kVA

Condition: used, Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, table load: 800 kg, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS x-path: 610 mm y-path: 500 mm z-path: 510 mm Table clamping surface: 1000 x 460 mm Spindle holder: BT 40 Spindle speeds - infinitely variable: 120 - 8000 rpm Deb Exsuucq Eewx Tjut Spindle motor: 7.5 kW Torque at the spindle: 190 Nm Infinitely variable feeds: 1 - 8000 mm/min Rapid traverse X/Y/Z-axis: 24 / 24 / 18 m/min Table load: max. 800 kg Spindle projection: 510 mm Spindle/table distance min. / max.: 120 / 630 mm Tool changer: 24 Pos Tool diameter max.: 100 mm Tool length - max.: 300 mm Tool weight max.: 10 kg MACHINE DETAILS Model: FIRST MCV 600 Year of construction: 2004 Control : Heidenhain iTNC 530 Machine length: 2.36 m Machine width: 2.45 m Machine height: 2.54 m Machine weight: approx. 4.3 t

Condition: good (used), Functionality: fully functional, Year of construction: 2023, operating hours: 154 h, Technical data: Air flow at pressure: 7 bar - 21.2 m³/min; 8.6 - 19.7 m³/min; 10.3 - 18 m³/min Maximum pressure: 12 bar Dueb Exsumv D Nswx Tet Caterpillar diesel engine with 146 kW output Tank capacity: 420L Fuel consumption at full load (L/h): 36,3L Connections: 2x G2 and 1x G3/4 Additional equipment: AFTERCOOLER - an additional cooler for after-cooling the compressed air CYCLONE SEPARATOR - for separating condensate from the compressed air after cooling It is powered by a 6-cylinder Caterpillar engine with 146 kW. The M210 delivers an impressive 18 m³/min of compressed air at 10 bar. Even with a full fuel tank, the standard version weighs 3.7 tons, which makes it easier to transport as it is mounted on a two-axle chassis. Operating hours: 154 h CoC certificate for rapid approval: not available Warranty: 1 year (valid for Serbia, Croatia, Bosnia and Herzegovina, Montenegro, North Macedonia and Kosovo). Functional and in perfect condition!

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, spindle speed (max.): 7,000 rpm, spindle speed (min.): 350 rpm, controller manufacturer: Fanuc, controller model: 16 TCNC, TECHNICAL DETAILS Spindle data Bar diameter: max. 32 mm Main spindle stroke: 310 mm Main spindle stroke with driven cone: 295 mm Spindle power: 7.5 kW Main spindle speed: 350 - 7,000 rpm Number of turning tool holders: 6 Number of driven tool holders: 4 Driven tools Speed: 350 - 5,000 rpm Number of tool holders on the combination unit: 4 Counter spindle data Diameter in pick-up spindle: max. 32 mm Counter spindle speed: 350 - 7,000 rpm Counter spindle power: 3.7 kW Indexing C-axis counter spindle: 1° Pick-up spindle stroke: 125 mm MACHINE DATA Control: FANUC 16 TCNC Electrical connected load, power: 20 kW Dimensions: 1,700 x 2,515 x 1,700 mm Weight: 2,900 kg EQUIPMENT - Bar loading magazine FMB Turbo 5-42 for max. length 4,000 mm, diameter 42 mm Dobouuclie Exwx Teut - Coolant tank with pump

Condition: like new (used), Year of construction: 2022, Lenght (transport): 9.02 m Height (transport): 3.45 m Width: 2.26 m Gross Weight (approx.): 9,026.5 Dujbotrf N Sj Exwx Tjt Axle Weight (approx.): 8,119.3 kg Tongue Weight (approx.): 907.2 kg Engine: Volvo Horsepower: 174 kW Fuel Capacity (tank): 333 liters Hydraulic oil: 238.5 liters Infeed Opening: 58,4x134,6 cm Screen Area: 8,413 square cm Brakes: Electric Towing arrangement: Pintle hitch Tires: (4) 235-75R-17.5H Tracks: Optional - 308 Caterpillar Undercarriage EQUIPMENT HIGHLIGHTS Sloped infeed walls for improved visibility - Variable speed infeed system consisting of live floor equipped with slat chain - Removal bottom infeed clean-out door - Hydraulically operated debris containment door - Heavy-duty, pinned rotor complete with (18) hammers and (18) replaceable inserts - Dual belt discharge consisting of primary aggregate belt conveyor discharge onto a secondary stacking conveyor. - NACD 11.5" triple plate clutch - Independent adjustable drive belt tensioner - Single, side-load grate system made of AR450 steel available in multiple hole sizes and pattern The machine is like new and only 40 hours have been completed. It has been used as a test machine. The owner offers a 1000 hours warranty! The price includes transport within a radius of up to 1000 km!

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Duob Eouc Szzexwx Tjt