Second-hand machinery for sale (2,399)

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, Functionality: fully functional, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Dushx Apbovy U R Ejcet Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: good (used), Year of construction: 2013, operating hours: 29,585 h, Functionality: fully functional, machine/vehicle number: 248377, laser power: 4,000 W, travel distance X-axis: 8,750 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 370 mm, pipe diameter: 406 mm, product width (max.): 300 mm, swivel angle A-axis (max.): 999,999 °, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, The system was commissioned in 2014! TECHNICAL DETAILS Travel X: 8,750 mm Travel Y: 1,270 mm Travel Z: 370 mm Travel U: 9,300 mm Travel V: 2,515 mm A-axis: n x 360° B-axis: ±135° Control: Mazak FX CNC control Laser Type: YB-L40 C10T01 Laser power: 4 kW Cutting head Type: 3D cutting head for tubes, profiles and free-form parts Dushx Apbevy Hnpecst Lens: 8.5” Consumption: 15 l/h Material & cutting capacity Table load: 480 kg Max. workpiece lengths: 8,000 mm Max. diameter of round tube: 406.4 mm Max. diameter of square tube: 300 x 300 mm Max. diameter of double T-beam / H-beam: 300 mm Max. diameter of L-beam: 254 x 254 mm Cutting capacity (90° cut) structural steel: up to 20 mm Cutting capacity (90° cut) stainless steel: up to 10 mm Cutting capacity (90° cut) aluminum: up to 8 mm Loading & unloading system Loading and unloading length: 8 m (for profiles/pipes up to 8 m) Unloading axis stroke X/Y/Z/A: 925 mm Unloading axis stroke U/V/W/B: 326 mm Rapid traverse Rapid traverse X, U, V: 30 m/min Rapid traverse Y, Z: 24 m/min Rapid traverse A, B: 9,600 °/min Rapid traverse C: 6,000 °/min MACHINE DETAILS On hours: 29,585 h Dimensions: 21,832 x 6,922 x 2,664 mm Installation dimensions: 22,109 x 7,215 x 3,204 mm Weight: 36,500 kg Connected load: 87 kVA EQUIPMENT - Powerful 4 kW laser for precise pipe and profile processing. - 3D cutting head for versatile applications (pipes, profiles, free-form parts). - Preparation for extraction - Extraction - Touch sensor - Weld seam detection - H200 equipment - Automatic pipe length measurement - Laser starter kit - Short material loading - FX Tube software - E-Tower software - Instructions and documentation

Condition: good (used), Year of construction: 2001, operating hours: 17,500 h, Functionality: fully functional, turning length: 450 mm, turning diameter: 102 mm, spindle speed (max.): 4,000 rpm, CNC turning/milling center for complete machining TECHNICAL DETAILS Max. turning diameter: 102 mm Turning length: 450 mm Swing diameter: 494 mm Djhxsvy Hnie Apbcsut Bar diameter: 65 mm Spindle speeds - infinitely variable: S1 / S2: 4,000 rpm Spindle motor: S1 / S2: 18.6 / 11 kW Turret No. 1 stations / of which driven: 10/10 VDI 30 Turret No. 2 stations / of which driven: 10/10 VDI 30 Driven tools: 8,000 rpm Tool drive power: 3.7 kW Total power requirement: 90 kVA MACHINE DETAILS Machine weight: approx. 10 t Space requirement: 6 x 2.5 x 2 m On hours: 60,000 h Spindle hours: approx. 17,500 h EQUIPMENT - 8 axes - 2x 10-way turret with driven tool stations - C-axes on both spindles - Y-axis 35 mm turret 1 - 2 x 3-collet chucks - Chip conveyor - Bar feed

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, laser power: 3,200 W, workpiece weight (max.): 500 kg, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis: 2,500 mm Y-axis: 1,250 mm Z-axis: 115 mm Control: TRUMPF CNC control, based on Siemens Sinumerik 840D Workpiece weight: 500 kg Laser Laser source: TRUMPF TLF 3200 Power: 3.2 kW (3,200 W) Cutting head: 7.5 inches Movement & accuracy Speed parallel to axis: 60 m/min Speed simultaneous: 85 m/min Smallest programmable increment: 0.01 mm Djhxevy Ewcj Apbcsut Positioning accuracy: ± 0.1 mm Repeatability: ± 0.03 mm MACHINE DETAILS Length: 7,100 mm Width: 5,900 mm Height: 2,000 mm Machine weight: 7,900 kg

Condition: ready for operation (used), Functionality: fully functional, maximum load weight: 120 kg, operation weight: 3,500 kg, Year of construction: 2022, operating hours: 66 h, arm reach: 7,300 mm, working height: 12,500 mm, Equipment: crane, TECHNICAL DETAILS Service weight: 3,500 kg Max. load capacity: 120 kg Dshx Ajvy Et Repbceut Tires: all-season tires Load weight: 120 kg Range: 7.3 m Radius: 360° Working height: 12.5 m Height of basket bottom edge: 10.5 m Brand of basket: Klubb MACHINE DETAILS Operating hours: 66 h Weight: 3500 kg Vehicle height - mobile: 3.4 m Vehicle length - mobile: 6.8 m EQUIPMENT - 220V connection in the work basket - Reinforced suspension

Condition: excellent (used), Year of construction: 2020, operating hours: 856 h, Functionality: fully functional, machine/vehicle number: LLR20200130, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, controller manufacturer: Syntec, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area (XYZ): 1,300 x 2,500 x 800 mm C-axis swivel range: ±360° A-axis swivel range: ±220° Resolution: ±0.01 mm Operating language: G-code Control: Syntec 5-axis control with RTCP function and independent dashboard Spindle Spindle: Hiteco 12 kW QS-2, water cooled Spindle head: ACCTEK with two axes Speed: 6,000 - 24,000 rpm Collet: ER40 Spindle cooling: liquid Tools and table Tool changer: 8-position carousel type Holder: HSK63F Table: Vacuum table, T-slots Motor power X-axis Motor power: 1,800 W Y-axis motor power: 1,300 W (dual drive) Z-axis motor power: 2,800 W A-axis motor power: 400 W C-axis motor power: 750 W Speeds and accuracy Control: Syntec 5-axis control with RTCP function X,Y positioning accuracy: ±0.03 mm Z positioning accuracy: ±0.02 mm Max. travel speed A & C axis: 170 degrees/sec. Maximum XY axis travel speed: 45,000 mm/min Maximum Z axis travel speed: 15,000 mm/min X axis feed rate: ≤45 m/min Y axis feed rate: ≤60 m/min Z axis feed rate: ≤15 m/min MACHINE DETAILS Construction: Heavy-duty welded steel construction Certification: CE certified Power requirement: 380V, 50Hz, 3-phase Inverter: Delta 15 kW Gearbox: Shimpo EQUIPMENT - Dust extraction - Automatic oil lubrication (HYCNC) - Teyu water chiller CW5000 - Vacuum pump: 5.5 kW oil-free - UG software Dshx Ajvy Eb Iepbcout - Tool holders, collets and USB drive included

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1995, operating hours: 7,381 h, load capacity: 15,000 kg, lifting height: 3,520 mm, fuel type: diesel, mast type: standard, construction height: 3,380 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, TECHNICAL DETAILS Load capacity: 15,000 kg Load center: 1,200 mm Lift height: 3,520 mm Mast type: Standard Overall height: 3,380 mm Fork & structure data Fork carriage width: 2,500 mm Fork length: 2,400 mm Fork width: 200 mm Fork thickness: 100 mm Dimensions & weight Overall length: 5,400 mm Overall width: 2,650 mm Net weight: 22,700 kg Engine & drive Fuel type: Diesel Engine type: Perkins Drive type: Diesel Gearbox: Clark Tires Front: Pneumatic tires 12.00-20 Rear: Pneumatic tires 12.00-20 Condition Overall condition: Ready for use and fully functional Technical condition: Very good EQUIPMENT - Perkins diesel engine with Clark gearbox - Side shift and tine adjustment device for flexible handling - Full cabin with heating for comfortable working - Pneumatic tires front and rear for optimal traction - Side shift Dushjvy A U Sjx Apbcst - Tine adjustment device - Heating - Full cabin

Condition: ready for operation (used), Functionality: fully functional, fuel type: diesel, Year of construction: 2012, operating hours: 8,895 h, machine/vehicle number: SMC00593, TECHNICAL DETAILS Engine type: Diesel Engine: CAT C9 Duohx Apbevy A Thscjt Engine power: 138 kW Displacement: 8,800 cm³

Condition: good (used), Year of construction: 2003, operating hours: 13,772 h, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Volume: 1,000 ml, 750 ml, 500 ml Aseptic: no Tray type: TetraTop Flat Top 1000/500 ml Wrap Around Tray: 2 x 5 Performance: 9,000 cartons/h Tray type: Tetra Slim 1000 ml Tray: 2 x 6 Performance: 6,600 cartons/h Capping machine Duohx Ajvy Aybspbcet Model: TetraPak Type Capper 20 Screw cap diameter: 38 mm Number of machines: 2 pieces MACHINE DETAILS Operating hours: 13,772 h EQUIPMENT - Spare parts package available - Spare parts package SEMA Packer available - GSU for granulate transport - Granulate funnel - HCCU for foam cleaning - Volume adjustment type 190V converted to stainless steel cylinder - 20 x replacement cassettes - 2 x screwing machines TetraPak type Capper 20 for screwing on 38 mm screw caps - manual roller conveyor for inserting the rollers into the ASU - roller lifting truck for roller transport - retrofitting Rittal air conditioning unit for control cabinet Transport tracks are not included in the scope of delivery and must be purchased separately from Tetra Pak or another manufacturer. The line was dismantled by the manufacturer (Tetra Pak) and can be put back into operation with little effort.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 29,231 h, Functionality: fully functional, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Max. workpiece size: 3,000 x 1,500 mm X-axis (longitudinal movement): 3,000 mm Y-axis (transverse movement): 1,500 mm Z-axis (height adjustment): 115 mm Control type: Siemens Sinumerik 840D Laser Type: TLF 6000 Power: 6.0 kW (6,000 W) Wavelength: 10.6 µm Cutting thickness steel: 25 mm Cutting thickness: stainless steel: 25 mm Cutting thickness aluminum: 15 mm Movement & speed Duehx Apbjvy Euzjcot Parallel travel speed: 200 m/min Simultaneous travel speed: 300 m/min Smallest programmable increment: 0.001 mm Positioning accuracy: ± 0.1 mm Repeat accuracy: ± 0.03 mm MACHINE DETAILS Length: 11,250 mm Width: 4,600 mm Height: 2,400 mm Machine weight: 12 t Laser switch-on time: 29,231 h Cutting time: 11,298 h

Condition: ready for operation (used), Year of construction: 2013, operating hours: 50,000 h, Functionality: fully functional, laser power: 2,000 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 95 mm, pipe diameter: 120 mm, travel distance W-axis: 85 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-tube axis: 6,500 mm Y-beam guidance axis: 170 mm Z-beam guidance axis: 95 mm A rotation axis (chuck): n x 360° A1 rotation axis (steady rest): n x 360° W unloading piece support: 85 mm Control: Siemens Sinumerik 840D Operating hours: approx. 50,000 h Speeds X-tube axis: 90 m/min Y-beam guidance axis: 30 m/min Z-beam guidance axis: 22.5 m/min A rotation axis (chuck): 750°/s A1 rotation axis (steady rest): 750°/s Accuracy Position accuracy of interpolated axes: ± 0.05 mm Reproducibility: ± 0.03 mm Position deviation: ± 0.1 mm Workpiece dimensions Max. raw material length: 6,500 mm Min. remaining tube length: 160 mm Length of finished part: 4,500 mm Min. tube diameter: 12 mm Max. outer circle diameter: 120 mm Min. edge length for rectangular and square tubes: 12 mm Max. circle diameter for labeled rectangular/flat oval tubes: 140 mm Max. weight of workpiece: 13.5 kg/m Laser source Manufacturer: Rofin Sinar Model: DC020 Max. laser power: 2,000 W Beam mode K-factor: >0.9 Sheet thickness Duohx Apbsvy Am Iecot Sheet thickness mild steel (O2): 6 mm Sheet thickness stainless steel (N2): 4 mm Sheet thickness aluminum alloy (N2): 3 mm Consumption values Laser gases: Premix gas bottle in the laser source (replace every 12-18 months) Cutting gas consumption: O2 or N2, depending on material and part geometry Electrical consumption: 20 - 40 kW/h (varies depending on material and geometry) Compressed air consumption: 30 Nm³/h

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Line consists of: SCM Windor 100 SCM Superset NT Dushx Apbsvy Ahxscst SCM Profitech SCM Fleximat SCM Windor 100

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 0401-240027, product height (max.): 50 mm, product height (min.): 8 mm, product length (max.): 6,000 mm, product width (max.): 600 mm, product width (min.): 80 mm, TECHNICAL DETAILS Maximum workpiece size: 600 x 50 x 6000 mm Minimum workpiece size: 80 x 8 mm Drilling system Number of drilling spindles: 3 pieces Maximum drilling diameter: 8 - 40 mm Drilling tool: HSS cooling channel drill Cutting system Cutting process: Autogenous Cutting gases: Acetylene and oxygen (conversion to other media possible) Dushx Apsvytiysbcot Material transport Transport mechanism: Roller measuring feed Control and software Control: Fagor 8055i CNC CAD data formats: DSTV, DXF MACHINE DETAILS Total power requirement: 30 kW Machine weight: 6.5 t Machine dimensions (L x W x H): 2,000 x 1,900 x 2,800 mm Additional equipment: Filter system for cutting smoke extraction

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, Functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Djhxsvytgfs Apbcjut Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, product height (max.): 42 mm, product length (max.): 92 mm, No reserve price - guaranteed sale at the highest bid! Machine is in top condition and can be put back into operation with little effort. Duehx Aovy An Eepbcjt TECHNICAL DETAILS Production capacity: 40 cartons/minute Cups per tray: 6 cups/tray Total output: 240 cups/minute = 14,400 cups at 125 g/cup Cuts (LxWxH): 698.5 x 168.0 x 1.5 mm Lids (LxDxH): 95.5 x 95.5 x 9.0 mm Cups (DxH): 92.5 x 42.0 mm MACHINE DETAILS Machine dimensions (LxWxH): 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 44,092 h, Functionality: fully functional, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Regular maintenance by Bystronic UK TECHNICAL DETAILS Max. sheet size: 3,000 x 1,500 mm Control type: ByVision CNC02 Laser power Power: 4.4 kW (4,400 W) MACHINE DETAILS Switched on: 102,182 h Cutting time: 44,092 h Turbo blower hours: 2,987 h Djhovy Ertjx Apbcjut New turbo installed: end of 2023 Output coupler: 30,072 h Vacuum pump: 12,346 h EQUIPMENT - ByVision CNC02 control with CutControl - Bypos automatic focus adjustment - Torit dust collector for efficient extraction - Tools and accessories - 2 cutting heads

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, punching diameter: 76 mm, workpiece length (max.): 2,585 mm, workpiece width (max.): 1,280 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Technical information according to the manufacturer's brochure TECHNICAL DETAILS Dehx Apbjvytdwsceut Control: TRUMPF CNC control based on the SINUMERIK 840D Passage height in punching mode: 35 mm Passage height in laser mode: 22 mm Maximum sheet thickness in punching mode: 8 mm Workpiece weight: 200 kg Partial slide: 500 x 500 mm Working area (X x Y) without repositioning Combined operation: 2,585 x 1,280 mm Punching mode: 3,085 x 1,370 mm Laser operation: 3,085 x 1,280 mm Punching Maximum punching force: 220 kN Maximum punching diameter: 76 mm Maximum stroke rate: 600 rpm Max. number of tool positions on the linear magazine: 19 with 2 Claws Laser Model: TLF 2400 Power: 2,400 W Sheet thickness mild steel: 8 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 4 mm Distance control: DIAS III Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simultaneous: 108 m/min Positioning speed C-axis: 1 revolution/s Positioning speed C-axis when thread forming: 3 revolutions/s Accuracy Position deviation: ± 0.1 mm Average position spread: ± 0.03 mm MACHINE DETAILS Length: 8,100 mm Width: 7,500 mm Height: 2,400 mm Machine weight: 16,000 kg Electrical connection with TLF 2400: 70 kVA Connection pressure: 7 bar Maximum compressed air consumption: 65 Nm³/h

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, TV work table for maximum versatility when clamping the workpieces Dshx Apevy Acvsbcjut

Condition: good (used), Year of construction: 1998, operating hours: 76,296 h, Functionality: fully functional, machine/vehicle number: 030901, turning length: 125 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 350 rpm, turning diameter: 32 mm, controller manufacturer: Fanuc, controller model: Serie 18i Tb, TECHNICAL DETAILS Control: CNC Fanuc 18i Tb Djhx Apsvyr Uhobcsut Machining diameter: max. 32 mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis indexing: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 rpm MACHINE DETAILS Machine coolant: oil Machine dimensions: 1,700 x 2,512 x 1,700 mm Machine weight: 2,900 kg On-time: approx. 100,000 h Operating hours/cutting time: 76,296 h Part counter: 7,232,548 pieces Bar loading magazine: FMB TURBO 5-42 Bar capacity: 5-42 mm (mounting variant "A") Hinge belt conveyor: MAYFRAN Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 2,900 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 [mm] Loading magazine weight: approx. 1,800 kg Peripheral & accessory dimensions: approx. 1,900 x 700 x 800 mm Peripheral & accessory weight: approx. 200 kg EQUIPMENT - CE declaration of conformity - Operating tools - Small extinguishing system Kraft und Bauer and extinguishing agent container CO2 (10 kg)

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 085/2007.01, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller model: Andronic 2060PKM, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis (table): 360° Control: Andronic 2060PKM Rotary table diameter: 260 mm Spindle Spindle mount: HSK A63 Working spindle speed range: 15,000 rpm Feeds and speed Feed: 1 - 5,000 mm/min Rapid traverse X/Y: 15 m/min Rapid traverse Z: 12 m/min MACHINE DETAILS Machine weight: approx. 6.0 t Control cabinet (L x W x H): 2.4 x 0.6 x 2.2 m Dshx Apsvykxrebcjut Machine (L x W x H): approx. 3.5 x 2.4 x 3.2 m Total power requirement: approx. 42 kW EQUIPMENT - 5-axis parallel kinematics for prototype production

Condition: ready for operation (used), Year of construction: 1993, operating hours: 3,256 h, Functionality: fully functional, sheet thickness (max.): 13 mm, sheet width: 3,150 mm, distance between stands: 3,670 mm, TECHNICAL DETAILS Max. sheet width: 3,150 mm Max. sheet thickness: 13 mm Stand width: 3,670 mm Blade length: 3,150 mm Holders: 18 pieces Back stop Type: Motorized Travel path: 1,000 mm Positioning: Yes MACHINE DETAILS Height above floor: 850 mm Table size (L x W): 3,770 x 500 mm Machine dimensions (L x W x H): 4.4 x 2.8 x 2.4 m Machine weight: approx. 12.9 t Total power requirement: 30 kW EQUIPMENT - Hydraulic sheet holding device. - Cutting gap lighting - Safety light curtain at the rear - Short stroke and continuous operation possible Dehx Asvykwnepbceut

Condition: ready for operation (used), Year of construction: 2006, operating hours: 59,480 h, Functionality: fully functional, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, Predecessor model of the more popular TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice a year by Trumpf UK) Last service: January 2019 New vacuum pump installed: May 28, 2019 Working area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotation axis): +100° C-axis (rotation axis): n x 360° Laser source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Available (for programming support) Control & software CNC control: Siemens 840D with 3.5" floppy disk drive Network connection: Available (including analog modem for Remote maintenance) Dujhovy Ehzsx Apbcot Software: ToPs 100 with nesting module & IGES Translator + ToPs 800 with fixture construction & 3D IGES Translator MACHINE DETAILS Beam switched on: 14,922 h Laser switched on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed water cooling with air circuit - 5” high-pressure cutting optics - Set-up device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary work table

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 19, TECHNICAL DETAILS Duohx Aovyrqpjpbcst Control: Fanuc, 18i-T series Axis configuration: 7 (X / Z / Y / C1 / X1 / Z1 / C2) Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle accessories: collet Counter spindle speed: 8,000 rpm C-axis indexing: available Tool configuration Total number of tool holders: 19 pieces Construction: linear tool holder, front attachment, rear machining EQUIPMENT - Integrated extinguishing system from Kraft & Bauer - Chip conveyor and parts conveyor belt - Loading magazine FMB Turbo 3-26/3200 / A (built in 2001)

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, turning length: 200 mm, spindle speed (min.): 10,000 rpm, bar diameter: 16 mm, number of slots in tool magazine: 17, TECHNICAL DETAILS Control: CINCOM MITSUBISHI Meldas Dujhxjvyrp Ee Apbcet Axis configuration: 6 (X1 / Z1 / Y1 / C1 / X2 / Z2) Max. bar diameter: 16 mm Max. turning length: 200 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle diameter: 16 mm Counter spindle speed: 10,000 rpm Tool configuration Total number of tool holders: 17 pieces Construction: Linear tool holder, front attachment, rear machining EQUIPMENT - Integrated fire extinguishing system - Chip conveyor and parts conveyor belt - IEMCA Genius 118/3200 loading magazine (built in 2005)

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 18, TECHNICAL DETAILS Control: Cincom Mitsubishi Meldas Number of axes: 7 (X1 / Z1 / Y1 / C1 / X2 / Z2 / C2) Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle speed: 10,000 rpm C-axis indexing: 0.001° Tool configuration Total number of tool holders: 18 pieces Construction: Linear tool holder, front attachment, rear machining EQUIPMENT - Integrated fire extinguishing system - Chip conveyor and parts conveyor belt Duehevyrnnox Apbcjt - IEMCA BOSS 432r loading magazine