Second-hand machinery for sale (2,359)

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 605970300001, bending angle: 180 °, overall weight: 1,500 kg, pipe diameter: 18 mm, input frequency: 50 Hz, working length: 1,000 mm, controller model: DOC 85C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: DOC 85C Average performance: approx. 2400 sheets/h Duelragev D Nqnji Tst Maximum performance: 1000 mm - 90/90/0° - 0/180/0° with pipe 18 x 1.25 mm Bending performance Round pipe R=45 kg/mm²: 4 - 12.7 x 1.5 mm Round pipe R=35 kg/mm²: 4 - 14 x 1 mm Round pipe Al/Cu/Ms: 4 - 18 x 1.25 mm Bending speed H/Z Y-axis: 500°/s Positioning speeds X-axis: 2000 mm/s T-axis: 500 mm/s Rotation speed Z-axis: 900°/s Q-axis: 100°/s Measurement tolerances X/T axis: ± 0.1 mm Y/Z/Q axis: ± 0.1° MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg EQUIPMENT - Bar loader BLM Carm 7 (built in 2004, 405 kg) - Without conveyor belt - Without protective grille Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: like new (used), Year of construction: 2018, operating hours: 397 h, Functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Hartford Plus 3, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 12, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 620 mm Y-axis: 420 mm Z-axis: 450 mm Spindle nose to table: 100 - 550 mm Control: Hartford Plus 3 Table size: 620 x 420 mm Max. table load: 300 kg Spindle mount: 40 INT Spindle speed: 12,000 rpm Tool slots: 12 pieces Djlsv D I Apjragi Tsut MACHINE DETAILS Part counter: 662 pieces Operating time: 397 h Connected load: 15 kVA Weight: 3,919 kg

Condition: good (used), Functionality: fully functional, Year of construction: 2018, operating hours: 1,685 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, Equipment: all wheel drive, No UVV-relevant defects! Place of use: indoor, outdoor and off-road use TECHNICAL DETAILS Lifting height: 9.60 m Max. reach: 6.50 m Max. load capacity: 3,000 kg Dolov D Itboragi Tsut Load capacity at full reach: 1,000 kg Mast type: extendable Fuel type: diesel Engine: diesel MACHINE DETAILS Transport dimensions (L x W): 4.60 x 2.10 m Clearance height: 2.02 m Own weight: 7,100 kg EQUIPMENT - 4x4 all-wheel drive - Off-road tires - All-wheel steering - Cabin with heating

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,389 h, Functionality: fully functional, turning length: 760 mm, turning diameter: 330 mm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 830 mm, TECHNICAL DETAILS Max. turning length: 760 mm Max. turning diameter: 330 mm X-axis: 250 mm Y-axis: ±50 mm Z-axis: 830 mm B-axis: 830 mm Main spindle speed: 5,000 rpm Counter spindle speed: 6,000 rpm Bar capacity: Ø65 mm Number of tool stations: 12 MACHINE DETAILS Weight: 5,500 kg Workpiece counter: 538,606 pieces Switch-on time: 66,394 h Cutting time: 9,389 h EQUIPMENT - Chip conveyor - Tool measuring probe - LNS Servo 2 bar loader - Accessories as per pictures Djlrsv D H Nuoagi Teut

Condition: excellent (used), Year of construction: 2020, operating hours: 537 h, Functionality: fully functional, turning length: 1,450 mm, turning diameter: 425 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 1,240 mm, controller model: DMG MORI SLIMline® Multi-Touch Steuerung, Equipment: documentation/manual, 2-axis universal lathe with C-axis and Y-axis and driven tools TECHNICAL DETAILS Control: Siemens SLIMline multi-touch Swing diameter over bed: 700 mm Swing diameter over slide: 370 mm Max. turning diameter: 425 mm Recommended turning diameter: 320 mm X-axis: 307.5 mm Y-axis: ±60 mm Z1-axis: 1240 mm Spindle distance between main and counter spindle: 1450 mm Main spindle Spindle type: SMW BB-D 255/A2-8" Spindle nose: A2-8" Max. speed: 3,250 rpm Clamping diameter: 255 mm Drive power (40/100%): 33 / 22 kW Torque (40/100%): 630 / 420 Nm Turret Number of tools: 12 Number of driven tools: 12 Holder diameter: 40 mm Tool holder: VDI 40 Number of BT tool positions: 6 Index time 30°: 0.46 s Speed: 4,000 rpm Power: 5.44 kW Torque: 20 Nm Tailstock Type: hydraulic Travel path: 1,200 mm Force: 12 kN Position accuracy: 0.2 mm Centering point size: MK 5 Rapid traverse: 4 m/min Rapid traverse & accuracy Rapid traverse X/Z axis: 30 m/min Rapid traverse Y axis: 22.5 m/min Accuracy X / Y / Z: 10 µm Accuracy C: 10 arc seconds MACHINE DETAILS Connection power: 60 kVA Operating hours: 2,822 h Spindle hours: 537 h Hydraulics Tank: 17 l Pressure: 55 bar Duelragov D Hnqsi Tst Cooling Chip conveyor: 245 l Pump power: 0.85 kW Pump flow: 20 l/min EQUIPMENT - Through hole: D 82 mm - Chip conveyor - Hydraulic hollow clamping cylinder system for up to Ø80 mm bars - Hydraulic tailstock with pedal control - Electronic handwheel - Set with hard and soft clamping jaws - Collets  - Manual tool measuring probe - DMG Mori Io Tconnector - Documentation Machine has slight transport damage on the side panel on the left (see pictures)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,000 h, Functionality: fully functional, controller model: Siemens 840D (Powerline), Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control: Siemens 840D (Powerline) Main spindle passage: 90 mm, C-axis Counter spindle passage: 90 mm, C-axis Turret 1: 12x VDI 30, all stations driven, axes X/Y/Z/B, additional milling spindle on the rear of the turret Turret 2: 12x VDI 30, all stations driven, axes X/Z EQUIPMENT - Portal removal device - Chip conveyor - Pumps - Collets - Tool holders (fixed and driven) Dolrov D E Dkoagi Tjut - Manuals

Condition: ready for operation (used), Year of construction: 2012, operating hours: 13,202 h, Functionality: fully functional, machine/vehicle number: 121113, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse X/Y/Z: 32 m/min Feed range: 1 - 12,000 mm/min Working area Spindle nose to table: 120 - 730 mm Table size: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle system Speed range: 60 - 10,000 rpm Spindle torque: 332 Nm Spindle power: 13 kW (40 %) Spindle cooling: Oil cooled Dslrasv D Nlfsgi Teut Tool changer Number of tools: 30 stations Tool-to-tool change time: 1.5 s Max. tool weight: 7 kg Max. tool diameter: 76 mm Max. tool diameter with free magazine space: 140 mm Max. tool length: 300 mm Pull bolt: DIN 69871 Coolant & hydraulics Coolant tank: 250 l Hydraulic oil: R32 (ISO32) Compressed air connection: 3/8", 6-8 bar Internal cooling (IKZ): 22 bar MACHINE DETAILS Machine weight: 7,500 kg Power supply: 400 V / 75 A / 3 phases Connection power: 35 kVA Machine dimensions: 2,830 x 3,130 x 2,840 mm Control switch-on time: 31,887 h Machine switch-on time: 32,618 h Spindle hours: 13,202 h EQUIPMENT - Chip conveyor - Handwheel Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: new, Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8330006 A101, pressure: 35 bar, power: 2,284 kW (3,105.37 HP), rotational speed (max.): 1,800 rpm, rated speed: 1,500 rpm, type of cooling: water, Like New: Originally purchased for a waste incineration project but never installed or used. TECHNICAL DETAILS Temperature: 40 °C Type of cooling: water Speed Speed (min.): 1,500 rpm Speed (max.): 1,800 rpm Rated speed: 1,500 rpm Turbine data point A Rated power: 2,284 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 9.5 t/h Outlet pressure: 0.1 bar Outlet temperature: 46 °C Turbine data point B Rated power: 2,488 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 8.2 bar Regulated outlet temperature: 226 °C Flow rate inlet/outlet: 13.5 / 12.4 t/h Discharge pressure: 0.15 bar Discharge temperature: 55 °C Turbine data point C Rated power: 2,087 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 6 t/h Discharge pressure: 0.08 bar Discharge temperature: 42 °C Gearbox data Design power: 2704 W Rated speed LW / SW: 1500 / 8,304 rpm Transmission ratio LW/SW: 5.54 Delsv Dvdzeragi Tsut Center distance: 400 mm Max. inlet temperature: 60 °C Oil consumption: 70 l/mm Heat quantity dissipated: 33,694 kCal/h MACHINE DETAILS Overall height: 2,472 mm Overall length: 3,210 mm Overall width: 1,500 mm Total weight: 9,900 kg Electrical specifications Frequency: 50 Hz Type of input current: AC Input voltage: 39 V Rated current: 3 A

Condition: good (used), Year of construction: 2000, operating hours: 21,900 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, table width: 1,230 mm, table length: 410 mm, TECHNICAL DETAILS X-travel: 700 mm Y-travel: 315 mm Z-travel: 495 mm Quill travel: 180 mm Control: Heidenhain TNC 426 4th axis: available Table clamping area: 1,230 x 410 mm Tool holder: SK 30 MACHINE DETAILS Total power requirement: 20 kW Dslrsv Du E Deagi Teut Machine weight: approx. 3.2 t Operating hours: 66,200 h Spindle hours: 21,900 h EQUIPMENT - Renishaw measuring probe Tools, clamping devices and accessories are only part of the scope of delivery if they are listed under EQUIPMENT.

Condition: good (used), Year of construction: 2009, Consumer powder packaging line - nitrogen purged, hermetic flip-top box line including: Graphic Packaging filling machine with Bosch filler (2009), Nordson ProBlue 4 hot melt unit; controlled atmosphere, dust extraction unit, Mettler Toledo metal detector and X-ray unit, Bosch checkweigher, Markem Imaje coder. Output: 3,000 bags per hour. Format: Hermetic flip-top box. Duolraou U Nalogi Tet Formats: Box: W138, D73.5, H151.5.

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 662, arm reach: 2,500 mm, TECHNICAL DETAILS FP2 Mobility Pack ID: 2-0639-FA Measuring software: PcDmis 16 (licensed on notebook) Notebook: ASUS UX303L I7 – 12GB RAM – 256GB Scandisk hard drive WIN10 Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single point deviation: 0.020 mm Target volume accuracy: ±0.029 mm Arm weight: 8 kg Certificate from Jan 2025: within target values Actual single point deviation: 0.012 mm  Actual volume accuracy: - 0.018 mm EQUIPMENT - Carbon fiber double tube construction enables the separation of stability and measurement - AbsoluteArm-Series can start measuring directly without moving to a reference - Measuring arm - Touch system with automatic Button recognition - Button set: Button with ruby ball 3 mm, 6 mm and with steel ball 15 mm - Mounting plate with magnets - Transport case - Magnetic tripod - Test bar L = 700 mm - Test ball D = 25 mm - Power supply with connection cable - USB cable measuring arm notebook - Dust protection cover - B89 - Certificate Jan. 2025 (fulfills B89.4.22) Shipping conditions Dslraev Dl Ehjgi Tout - ex works, without additional packaging (measuring arm in case and notebook in protective cover) - so 2 parts - if the buyer orders collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, packed inside with air cushions) at a price of €150, secured on a pallet with packing tape.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: A8EW4982, turning diameter: 250 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, controller model: Sinumerik Operate, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 100 mm Z-axis travel: 300 mm C-axis for main spindle: available C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main drive speed: 60 - 6,300 rpm Tool turret: 12-way VDI16 Driven tools: 6 pieces Driven tool speed: 200 - 6,000 rpm Driven tool power: 1.2 kW Max. finished part length: 120 mm Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - SINUMERIK Operate key module Duolragov Dlr Iji Tst - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety devices in accordance with CE - Various tool holders (radial tool holder M4 (2x), radial tool holder M3 (1x), collet holder ESX 16 (2x), set of collets ESX 16 (1x), indexable insert drill holder Ø16 mm (1x), boring bar holder Ø10 mm (1x), radial angle milling holder 90° (1x), axial milling holder straight (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm through-hole, 1 set of soft top jaws (432 095) with 1/16" × 90° serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C including draw tube (A8Z 150 010) for draw collets 385E / 842 / 5C Ø2 - 25.5 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 14,124 h, Functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Control: Heidenhain 530 X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Working area Spindle nose to table: 120 - 730 mm Table size: 1,250 x 610 mm T-slots in the table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle system Speed range: 60 - 10,000 rpm Spindle torque: 332 Nm Spindle power: 13 kW (40 %) Spindle cooling: Oil-cooled Travel speeds Rapid traverse X/Y/Z: 32 m/min Feed range: 1 - 12,000 mm/min Tool changer Number of tools: 30 stations Tool-to-tool changeover time: 1.5 s Max. tool weight: 7 kg Max. tool diameter: 76 mm Max. tool diameter with free magazine space: 140 mm Max. tool length: 300 mm Pull bolt: DIN 69871 Coolant & hydraulics Coolant tank: 250 l Hydraulic oil: R32 (ISO32) Compressed air connection: 3/8", 6-8 bar Internal cooling (IKZ): 22 bar MACHINE DETAILS Machine weight: 7,500 kg Power supply: 400 V / 75 A / 3 phases Connection power: 35 kVA Duelragev D Ndzoi Tot Machine dimensions: 2,830 x 3,130 x 2,840 mm Control switch-on time: 34,988 h Machine switch-on time: 39,243 h Spindle hours: 14,124 h EQUIPMENT - Chip conveyor - Handwheel Any visible vices, tool holders and chucks are not part of the scope of delivery!

Year of construction: 2007, Condition: ready for operation (used), Functionality: fully functional, screw diameter: 27 mm, machine/vehicle number: DE27688, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Screw diameter: 2 x Ø 27.0 mm L/D ratio: 40D Drive power: 33.6 kW Processable materials: PE, PP, PS, ABS EQUIPMENT - Co-rotating - Segmented screws and cylinders - Atmospheric degassing Duslragiev Dkras Tst - Vacuum degassing including vacuum pump

Condition: ready for operation (used), Year of construction: 1996, operating hours: 78,796 h, Functionality: fully functional, machine/vehicle number: 11602, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, TECHNICAL DETAILS Travel paths (X/Y/Z): 600 x 450 x 500 mm Table size: 900 x 520 mm Max. table load: 450 kg Control: HEIDENHAIN TNC 426 Speed range: 20 - 6,300 rpm Tool holder: SK40 Drive power: 8.6 kW MACHINE DETAILS Machine dimensions (LxWxH): approx. 2.95 x 2.20 x 2.30 m Space requirement (LxW): approx. 4.55 x 3.60 m Total weight: approx. 4,900 kg Duelragijv Diyce Tjt Operating voltage: 400 V/3 ~50 Hz

Condition: good (used), Year of construction: 2019, Consumer packaging line for infant formula powder in cans with less than 1.5% oxygen for can diameters of 127 mm + 99 mm; The line carries out "highly standardized infant formula packaging". Formats cans Ø 127x153 mm, Ø 99x123.5 mm. 127 lids with both spoon closure and snap-on closure - 99 with snap-on closure. Laser marking on "Blue-Dot" on the base of the can. Including handling of can and lid materials; Depalletizing, cleaning and UV sterilization (Inemur), loose spoon handling (Aylesbury Automation), 360° inspection system (Eagle Vision), 6-head vacuum filler and refill station (PLF/JBT), checkweigher (Mettler Toledo), capping machine (Lanico), all enclosed in a controlled nitrogen atmosphere, capper for spoon cap and snap cap (Euroflow), CO2 laser marker and vision (Markem Imaje), printer and labeler (Markem Imaje). Duslrageu U I Twoi Tot Output 2500 - 3000 cans/hour.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,200 h, Functionality: fully functional, machine/vehicle number: MH 3729, cutting force: 800 t, power: 300 kW (407.89 HP), net weight: 120,000 kg, Very fast and high-throughput machine TECHNICAL DETAILS Cutting force: 800 t / 7,740 kN Cutting width: 950 mm Cutting height: 650 mm Rammer force: 90 t Number of shear strokes: 4 - 5 1/min Throughput for mixed scrap: 15 - 30 t/h Filling bed length: 7,100 mm Filling bed width: 2,400 mm Width of the closed filling bed: 880 mm Height of the closed filling bed: 600 mm Side cylinders per cover: 3 pieces Maximum cover force (per cover): 300 t / 3,000 kN Feed force: 160 t / 1,600 kN Oil tank: 6,000 l Maximum working pressure: 360 bar Control: PLC Main motors: 4 x 75 kW Motor for pilot pump: 1 x 4 kW Motors for cooling circuit: 1 x 5.5 kW Motors for cooling fan drive: 2 x 1.1 kW MACHINE DETAILS Overall length: 18,500 mm Overall width: 3,300 mm Dimensions of cabin: 1.5 x 1.5 m Weight: approx. 118 t Duolsv Ditvoragi Tjt EQUIPMENT - Hold-down device - Central lubrication system - Radio control & operation from control panel possible - Control panel, mounted in cabin, containing: Emergency stop piping button Selector switch for manual or automatic operation Control elements for manual operation Control elements for automatic operation

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 980713211, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Yasnac, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Rapid traverse: 36 m/min Control system: Yasnac Maximum spindle speed: 10,000 rpm Tool holder: BT-40 Number of tools in the magazine: 20 Pallet dimensions: 800 x 400 mm MACHINE DETAILS Length: 2,355 mm Width: 3,447 mm Total power requirement: 58 kVA Djlov Dibmoragi Tjut EQUIPMENT - Chip conveyor - High pressure pump

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 97-X1286, travel distance X-axis: 850 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Control CNC system: FANUC 160M X-axis: 850 mm Y-axis: 650 mm Z-axis: 700 mm Spindle Spindle mount: BT50 Spindle speed: 10,000 rpm Spindle cooling: High pressure 30 bar (1/2 spindle cooling) Tool storage capacity: 80 places Table & pallets Table size (working arch diameter): 850 mm Pallet size: 600 x 600 mm Parting angle: Continuous B-axis Maximum load capacity: 1,200 kg Pallet changer: 6 stations Rapid traverses Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min MACHINE DETAILS Total weight: 19,000 kg EQUIPMENT Dujlrev Dhq Toagi Tjt - Chip conveyor - Smoke extractor - CE marking

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, rotational speed (max.): 12,000 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS Control: Heidenhain iTNC530 with handwheel X-axis: approx. 3,000 mm Y-axis: approx. 6,000 mm Z-axis: approx. 1,250 mm 4th axis: swivel axis Spindle Spindle type: milling spindle for styrofoam (can be converted to high-frequency spindle) Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: Manual with union nut Drives & feed Dujlragiov Dhlqe Tjt Feed speed (X, Y, Z axis): up to 20 m/min Axis acceleration (X, Y, Z axis): up to 1.5 m/s² MACHINE DETAILS Connected load: approx. 28 kW Pre-fuse: 63 A Machine space requirement: approx. 5,000 x 10,000 x 4,500 mm Total weight: 10,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 0145000132A, turning length: 300 mm, turning diameter: 200 mm, spindle bore: 45 mm, rotational speed (max.): 6,000 rpm, turning diameter over bed slide: 380 mm, TECHNICAL DETAILS Maximum turning length: 300 mm Dslragisv Dhg Uj Tsut Maximum turning diameter: 200 mm Turning diameter over bed: 380 mm Spindle bore: 45 mm Main spindle speed range: 6,000 rpm Electronic main connection: 400V / 50Hz Total power requirement: 21 kVA X-axis: 165 mm Z-axis: 340 mm Control: Fanuc MACHINE DETAILS Dimensions (LxWxH): 2,885 x 1,720 x 1,670 mm Weight: approx. 4,200 kg EQUIPMENT - Driven tools - Tool holder VDI30 - Part catcher - Tailstock - Chip conveyor - 12 turret positions

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: V7036, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fanuc Series 18i, spindle speed (max.): 13,000 rpm, number of slots in tool magazine: 20, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Distance spindle nose - table surface: 150 - 600 mm Feed rate: 40 m/min Rapid traverse: 40 m/min Control system: Fanuc Series 18i Maximum spindle speed: 13,000 rpm Spindle drive power: 18 / 22 kW Spindle torque: 95 / 117 Nm Pallet dimensions: 800 x 450 mm Maximum workpiece size (D x H): 800 x 450 x 450 mm Maximum workpiece weight: 400 kg Tool holder: ISO 40 Number of tools in the magazine: 20 Maximum tool diameter (with free neighboring positions): 120 mm Maximum tool diameter (with occupied neighboring positions): 114 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Chip-to-chip time: 4.5 s Total power requirement: 40 kVA Dujlragiev Dhppj Tst MACHINE DETAILS Length: 2,315 mm Width: 2,760 mm Height: 2,805 mm Weight: 7,300 kg

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 15,700 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 2,400 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of robots: 2 pieces Model: ABB IRB R6400F/3.0-100 Control: ABB S4C controller with off-line programming software X-travel path robot 1: 10,700 mm X-travel path robot 2: 15,700 mm Y-travel path: 2,600 mm Z-travel path: 2,400 mm Duelragisv Dhhle Tot Number of axes per robot: 7 Travel path robot 1: 11,950 mm Travel path robot 2: 16,950 mm Distance travel path: 3,140 mm Spindle & speed Spindle type: Bornemann hollow milling spindle Power: 1.1 kW Speed range: 2,000 - 12,000 rpm Spindle mount: 78/8 with HSK40 adapter MACHINE DETAILS Installation area per robot: 1,044 x 922 mm Weight per robot: approx. 2,050 kg DESCRIPTION - Two powerful ABB robots for flexible processing - Large travel paths in X, Y and Z for maximum range - High-precision Bornemann hollow milling spindle with up to 12,000 rpm - Control with ABB S4C and off-line programming - HSK40 adapter for versatile tool holders This special system has a modular design and can therefore be optimally adapted to your needs. The individual components, such as the handling or milling robot, can also be used independently of one another if required. In addition, a spindle conversion is possible with little effort.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 8,585 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC426, spindle speed (max.): 42,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 44, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 450 mm X-axis rapid traverse: 15 m/min Y-axis rapid traverse: 15 m/min Z-axis rapid traverse: 12 m/min Control manufacturer: Heidenhain Control model: TNC426 Spindle speed: 10 - 42,000 rpm Spindle motor power: 9,000 W Number of slots in the tool magazine: 44 MACHINE DETAILS Total weight: 3,100 kg Spindle operating hours: 8,585 h EQUIPMENT - Documentation/manual - Speed continuously adjustable Djlraev Dhdyegi Teut - 44-way tool changer - Fully protective cabin - Angle table, 530 x 900 mm - Preparation for 4th and 5th axis - Additional Fischer spindle (42,000 rpm) - Spray cooling

Year of construction: 1998, Condition: ready for operation (used), Functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully functional condition + regular maintenance by machine manufacturer Control completely renewed in 2017! TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control: Fidia CXR with handwheel - new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast) Table load: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Djljv Dhb Ssragi Teut Tool clamping: manual with union nut Feed rate: max. 20 m/min Axis acceleration: max. 1.5 m/qs MACHINE DETAILS Connection power: approx. 28 KW Pre-fuse: 63 A Space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.