Second-hand machinery for sale (2,399)

Condition: used, Year of construction: 2017, GF Agie Charmilles Mikron Mill E 500U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.125.00.0011 (2017), 7 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe Dolq Iy Hjwaaa Dscsut Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,438 h, Functionality: fully functional, TECHNICAL DETAILS Max. build volume: 356 x 305 x 305 mm Duelqov U Uw Io Iy Hcst Material type used: ASA Material types according to manufacturer: ABS-M30, ABS-M30i, ABS-ESD7, ASA, FDM Nylon 12, FDM Nylon 12cf, PC-ABS, PC, SR20, SR30, SR35, SR100, SR110, PC-BASS Accuracy: ± 0.127 mm or ± 0.0015 mm (depending on material) MACHINE DETAILS Network LAN connection: required for communication and file transfer Interface: 100 Base-T, Ethernet protocol, RJ45 IP configuration: DHCP or static EQUIPMENT - 3x400 V to 3x230 V transformer included

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 516221J01386, Year of construction: 2018, operating hours: 465 h, load capacity: 1,600 kg, lifting height: 5,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, Equipment: UVV, TECHNICAL DETAILS Drive: Electric Battery voltage: 48 V UVV approved until: 03/2026 Performance data Power: 13 kW Load capacity: 1,600 kg Load center: 500 mm Tire condition: 90% Mast & Fork Mast type: Triplex Lift height: 5,800 mm Fork length: 1,200 mm MACHINE DETAILS Total weight: 2,548 kg EQUIPMENT - Pallet forks - Sideshifter - Head protection Delqsv U T The Iy Hcout - Lighting - Work lights front & rear - Windshield with wiper - Joystick 4plus - Single-pedal control - Charger

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: Clear float glass Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. Djlq Iyjv U Rh Ae Hcjut EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1101834, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm Tool changer: 24-station Further information according to the manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Duelq Iy Hev U Nwvocot Weight: approx. 3.7 t

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Duslq Ijv Rxaxsy Hcst

Condition: used, Year of construction: 2001, Tortellinatrice Mario Agnelli Type 500.540 Ravioli/Cappelletti Maker. S/No. 915.0 226 (2001) Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dolq Iy Hsv U U Tvjcout

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Duelq Iyev U Da Se Hcot Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Condition: used, Year of construction: 1996, MONFORTS KNC5 Cycle-Controlled Lathe Machine Data Year of Manufacture: 1996 Dimensions: 3000 x 1600 x 2000 mm (L/W/H) Control: MTC-K KNC 5 (1500) Machine as transport unit approx. 3,000 kg Working Area Center Distance 1,580 mm Swing Diameter over Bed/Cross Slide 500/290 mm Cross Slide Travel 265 mm Bed Width 360 mm Headstock Spindle Diameter at Front Bearing 100 mm Spindle Mount according to DIN 55027 Size 11 Spindle Bore 71 mm Duelq Iyov Rr Ame Hcet Spindle Inner Taper 80 mm Metric Main Drive Infinitely Variable AC Drive (100%/40% Duty Cycle) 11/16.5 kW Total Speed Range 3 – 2,800 rpm Gear stage I 3 – 280 rpm Gear stage II 13 – 1,120 rpm Gear stage III 50 – 2,800 rpm Max. torque 1,681 Nm Feed drives Three-phase servo drives with mechanical safety clutch Feed force longitudinal/transverse 11.3/11.3 kN Rapid traverse speed longitudinal/transverse 10/5 m/min Further information Pick-up date: End of June 2025 Material No.: 10342461 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Djlq Iy Hjv U Ralecjut Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140653, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 EQUIPMENT Tool changer Dolq Iev U Nn Uoy Hceut Chip conveyor Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Dolq Iyjv Rw Nlj Hcout

Condition: used, Mezzanine with Horizontal Screw Distribution Line and Automated Dough Shutters. IMI Mixer. S/No. 094040 Associated Hoppers and Pumps, Inspection Walkways Access Ladder and Control Panels. Delov U U E Ssq Iy Hcsut Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 810 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: CNC Fanuc 18M, spindle speed (max.): 8,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X travel: 810 mm Y travel: 520 mm Z travel: 510 mm Table Number of pallets: 2 Table size per pallet: 800 x 600 mm Load per pallet: 500 kg Spindle Spindle speed: max. 8,000 rpm Tool holder: BT40 Dujlq Iyev Uq Ehj Hcot Tool changer & cooling Tool positions: 24 Coolant supply through spindle: 20 bar EQUIPMENT - Chip conveyor

Condition: used, Year of construction: 1998, Cycle-Controlled Lathe KNC8S Machine Data Year of Manufacture: 1998 Dimensions: 6200 x 2110 x 1915 mm (L/W/H) Weight: Machine as transport unit approx. 7200 kg Control System: MTC-K KNC 8S (4000) Duelq Iy Hsv Rr Agjcet Working Area Center Distance 3950 mm Swing Diameter over Bed 830 mm Swing Diameter over Cross Slide 540 mm Cross Slide Travel 450 mm Top Slide Displacement 250 mm Bed Width/Cross Slide Width 520/280 mm Bed Slide Guide Length 600 mm Turning Tool Cross Section 32 x 32 mm Spindle Diameter at Front Bearing 180 mm Spindle Mount according to DIN 55027 Size 11 Material Capacity 130 mm Spindle inner taper: 140 mm Main drive: Continuously variable, AC motor Drive power (50/100% duty cycle) 50/37 kW Total speed range: 2-1600 rpm Gear stage: | 2- 225 rpm Gear stage II 5- 559 rpm Gear stage II 7- 900 rpm Gear stage IV 18-1600 rpm Max. spindle torque 8750 Nm Speed control 5-200% Load indicator up to 125% Feed drive Three-phase servo drive with mechanical safety clutch Feed force longitudinal/transverse 23880/11000 N Rapid speed longitudinal/transverse 5/4 m/min Further information Pick-up date: End of June 2025 Material No.: 10342451 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 28 - 7766, spindle speed (max.): 1,600 rpm, stroke distance: 300 mm, controller model: NAGEL MSU3, machining diameter: 8 mm, Spindle 1 with electromechanical pressure expansion Spindle 2 with rotary expansion for Precidor or friction honing for precise diameters Delq Iysv Uqr Us Hcsut 6-station rotary table: -Loading and unloading -Empty station -Pre-honing -Measuring -Final honing -Measuring TECHNICAL DETAILS Machining diameter: 8.0 mm Machining length: 30.5 mm Control system: Nagel MSU3 Machine output: 76 workpieces/h at 100% capacity Roundness: 0.0015 mm Bore tolerance: +0.004 / +0.006 mm Surface finish: Rz 1.6 µm Honing time: 40 s Non-productive time: 7 s Cycle time: 47 s Honing spindle Number of honing spindles: 2 Hydraulic stroke length: 10 – 300 mm Lifting speed: continuously adjustable up to 25 mm/min Tool connection: 50 mm Spindle rotation: continuously adjustable from 400 – 1,600 rpm Lifting drive power: 5.5 kW Spindle drive power: 2 × 1.5 kW = 3 kW Tool Coolant: Honing oil Tool holder: Collet head Tool: Diamond Pre-machining accuracy Conciliation: 0.008 mm Roundness: 0.008 mm Roughness: Rz 10 µm Material allowance: 0.031 – 0.048 mm / 0.005 – 0.008 mm MACHINE DETAILS Dimensions: approx. 4,400 × 3,050 × 3,520 mm Weight: 5 t Hydraulic tank: 400 l EQUIPMENT - Calibration device - Caradan workpiece holder - One tool each for spindle 1 and spindle 2.

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Delev U Nm Doq Iy Hcjut Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: good (used), last calibration Aug 2024 Duolq Isv Rw Eysy Hcst

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Duolsv Uqf Ioq Iy Hcot Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, controller model: FANUC OM, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X travel: 500 mm Y travel: 350 mm Z travel: 350 mm Spindle Spindle speed: max. 12,000 rpm Tool holder: BT30 Tool positions: 20 Djlq Iyov Uqz Aj Hcsut MACHINE DETAILS Dimensions: 1,800 x 3,000 x 2,500 mm Machine weight: 5 t EQUIPMENT - 2 pallets - Coolant supply

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90571, working width: 3,200 mm, No reserve price - guaranteed sale to the highest bidder! The machine had been out of service for 8 years and required maintenance (cleaning, lubrication, greasing, etc.) before being put into operation. Accordingly, the machine had been in production for 17 years. TECHNICAL DETAILS Working width: 220 - 3,200 mm Drilling units Floor units: 6 units with 2 drilling heads each (2 x 11 spindles) Duslq Ijv Uqaxey Hcet Spindles per floor unit: 22 Total number of floor spindles: 132 Upper units: 2 units with 2 drilling heads each (2 x 11 spindles) Spindles per upper unit: 22 Total number of upper spindles: 44 Horizontal units: 2 units Clamps and removal Upper pressure clamps: 4 units Motorized endless screws for chip removal: 2 units MACHINE DETAILS Power: 37.3 kW Voltage: 380 V Current: 7 A Frequency: 50 Hz EQUIPMENT - Electronic programming device RT 483 - Each drilling head is rotatable - Through-feed motorized Conveyor belts with adjustable speed - Extra unit for automatic feeding of small panels

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 951 h, Functionality: fully functional, laser power: 6,000 W, laser hours: 951 h, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS General Information Functionality: Fully functional Laser hours: 500 h Working area and travel paths Working area: 3,048 x 1,524 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Performance and power supply Laser head: BodorGenius Laser source: Bodor Power Power: 6 kW (8.16 HP) Laser power: 6,000 W Input voltage: 400 V Input current type: Three-phase Compressed air connection: 7 bar Positioning and accuracy Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Sheet metal processing Sheet thickness steel O2: 25 mm Sheet thickness steel N2: 20 mm Sheet thickness aluminum N2: 20 mm Brass sheet thickness: 12 mm Maximum workpiece weight: 1,000 kg Machine structure Machine bed: Segmented bed with mortise-and-tenon design Gantry structure: Made of drawn aluminum Axis drive and guideway Axes (X/Y/Z): Servo motor and drive Linear guideways: Included Control and display Control system: BodorThinker Display size: 21.5 inches MACHINE DETAILS Djlq Ijv Up S Tjy Hceut Overall length: 9,100 mm Overall width: 2,500 mm Overall height: 2,055 mm Total weight: 8,000 kg Connected load: 59.8 kVA / 90.9 A EQUIPMENT Cooling unit

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, working width: 1,000 mm, No reserve price - guaranteed sale to the highest bidder! A complete, fully CNC-controlled planer is for sale. A viewing/training session is available upon purchase prior to disassembly! TECHNICAL DETAILS Costa Planer Number of spindles: 10 Control: CNC Spindle Configuration 1. Spindle horizontal 2. Lifting spindle right vertical 3. Lifting spindle left vertical 4. Lifting spindle horizontal 5. Lifting spindle right vertical 6. Lifting spindle left vertical 7. Lifting spindle top horizontal 8. Lifting spindle bottom horizontal 9. Lifting spindle bottom horizontal 10. Jointer spindle bottom horizontal 1x Canali Band Saw 1x Büttfering Sander Working Width: 1100 mm Number of Units: 3 1x Combination Unit 1x Single Unit 1x Brush Unit Conveyor Technology Stacking Unit Rupa Vacuum Lifter (age: approx. 1.5 years) Cross Conveyor 2x Longitudinal/Cross Conveyors Roller Conveyor with Discharge Roller Conveyor to Büttfering Sanding machine Lifting platform Maintenance was always carried out at regular intervals and professionally. Previous application: Production of wainscoting and parquet (panels) Dslqjv Up Dpe Iy Hcjut Reason for sale: New construction Machine available from September 2025!

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Djlq Iy Hsv Rwz Ioceut

Condition: good (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 24,000 rpm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS X travel: 3,400 mm Y travel: 2,700 mm Dujlqov Uqyxo Iy Hcet Z travel: 1,500 mm Control: Siemens CNC 840 D C-axis rotation range: +400° A-axis swivel range: +100° Clearance between posts: 2,200 mm Spindle Spindle speed: max. 24,000 rpm Spindle power: 15 kW Tool holder: HSK A63 Tools & Pallets Tool changer positions: 20 Number of pallets: 2 Pallet size: 2,500 × 1,400 mm EQUIPMENT - Gantry design with 5 axes