Second-hand machinery for sale (2,405)

Condition: used, Year of construction: 2008, GF Agie Charmilles Mikron UCP 600 Vario 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. TBC (2008), 10 Pallet Changer System, 30 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Dkjlqyswaaf Tow Rtol Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK" Dkjlqyw Rou R N Hyjtjl

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,438 h, Functionality: fully functional, TECHNICAL DETAILS Max. build volume: 356 x 305 x 305 mm Material type used: ASA Material types according to manufacturer: ABS-M30, ABS-M30i, ABS-ESD7, ASA, FDM Nylon 12, FDM Nylon 12cf, PC-ABS, PC, SR20, SR30, SR35, SR100, SR110, PC-BASS Accuracy: ± 0.127 mm or ± 0.0015 mm (depending on material) MACHINE DETAILS Dslqev U Uw Ijyw Rtekl Network LAN connection: required for communication and file transfer Interface: 100 Base-T, Ethernet protocol, RJ45 IP configuration: DHCP or static EQUIPMENT - 3x400 V to 3x230 V transformer included

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 516221J01386, Year of construction: 2018, operating hours: 465 h, load capacity: 1,600 kg, lifting height: 5,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, Equipment: UVV, TECHNICAL DETAILS Drive: Electric Battery voltage: 48 V UVV approved until: 03/2026 Performance data Power: 13 kW Load capacity: 1,600 kg Load center: 500 mm Tire condition: 90% Mast & Fork Mast type: Triplex Lift height: 5,800 mm Fork length: 1,200 mm MACHINE DETAILS Total weight: 2,548 kg EQUIPMENT - Pallet forks - Sideshifter - Head protection - Lighting - Work lights front & rear - Windshield with wiper Delqysv U T Thow Rtskl - Joystick 4plus - Single-pedal control - Charger

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: Clear float glass Djlqyw Rev U Rh Ajtjkl Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1101834, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm Tool changer: 24-station Further information according to the manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Dkslqyw Rov U Nwvstel Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Weight: approx. 3.7 t

Condition: used, Year of construction: 2015, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.587 (2015), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Delqjwaafajyw Rtekl

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 Dkslqyweu Egage Rtjl - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Delqyev U Da Ssw Rtokl Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Condition: used, Year of construction: 1996, MONFORTS KNC5 Cycle-Controlled Lathe Dslqov Rr Ameyw Rtokl Machine Data Year of Manufacture: 1996 Dimensions: 3000 x 1600 x 2000 mm (L/W/H) Control: MTC-K KNC 5 (1500) Machine as transport unit approx. 3,000 kg Working Area Center Distance 1,580 mm Swing Diameter over Bed/Cross Slide 500/290 mm Cross Slide Travel 265 mm Bed Width 360 mm Headstock Spindle Diameter at Front Bearing 100 mm Spindle Mount according to DIN 55027 Size 11 Spindle Bore 71 mm Spindle Inner Taper 80 mm Metric Main Drive Infinitely Variable AC Drive (100%/40% Duty Cycle) 11/16.5 kW Total Speed Range 3 – 2,800 rpm Gear stage I 3 – 280 rpm Gear stage II 13 – 1,120 rpm Gear stage III 50 – 2,800 rpm Max. torque 1,681 Nm Feed drives Three-phase servo drives with mechanical safety clutch Feed force longitudinal/transverse 11.3/11.3 kN Rapid traverse speed longitudinal/transverse 10/5 m/min Further information Pick-up date: End of June 2025 Material No.: 10342461 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Djlqysv U Ralsw Rtokl Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140653, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 EQUIPMENT Dkslov U Nn Uoqyw Rtol Tool changer Chip conveyor Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: used, Year of construction: 2016, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.619 (2016), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Dkolswaabujqyw Rtel

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Dkelov Rxaxoqyw Rtsl

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 810 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: CNC Fanuc 18M, spindle speed (max.): 8,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X travel: 810 mm Y travel: 520 mm Z travel: 510 mm Table Number of pallets: 2 Table size per pallet: 800 x 600 mm Load per pallet: 500 kg Spindle Spindle speed: max. 8,000 rpm Tool holder: BT40 Dolqjv Uq Ehoyw Rtokl Tool changer & cooling Tool positions: 24 Coolant supply through spindle: 20 bar EQUIPMENT - Chip conveyor

Condition: used, Year of construction: 1998, Cycle-Controlled Lathe KNC8S Machine Data Year of Manufacture: 1998 Dimensions: 6200 x 2110 x 1915 mm (L/W/H) Weight: Machine as transport unit approx. 7200 kg Control System: MTC-K KNC 8S (4000) Working Area Center Distance 3950 mm Swing Diameter over Bed 830 mm Swing Diameter over Cross Slide 540 mm Cross Slide Travel 450 mm Top Slide Displacement 250 mm Bed Width/Cross Slide Width 520/280 mm Bed Slide Guide Length 600 mm Turning Tool Cross Section 32 x 32 mm Spindle Diameter at Front Bearing 180 mm Spindle Mount according to DIN 55027 Size 11 Material Capacity 130 mm Spindle inner taper: 140 mm Main drive: Continuously variable, AC motor Dslqysv Rr Agow Rtokl Drive power (50/100% duty cycle) 50/37 kW Total speed range: 2-1600 rpm Gear stage: | 2- 225 rpm Gear stage II 5- 559 rpm Gear stage II 7- 900 rpm Gear stage IV 18-1600 rpm Max. spindle torque 8750 Nm Speed control 5-200% Load indicator up to 125% Feed drive Three-phase servo drive with mechanical safety clutch Feed force longitudinal/transverse 23880/11000 N Rapid speed longitudinal/transverse 5/4 m/min Further information Pick-up date: End of June 2025 Material No.: 10342451 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Dkjlqev U Nm Deyw Rtol Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: used, Year of construction: 2017, GF Agie Charmilles Mikron Mill E 500U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.125.00.0011 (2017), 7 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe Dolqyewaaa Djw Rtokl Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Dslqywev Rw Nls Rtokl

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, controller model: FANUC OM, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale to the highest bidder! Dkjlqysv Uqz Asw Rtol TECHNICAL DETAILS X travel: 500 mm Y travel: 350 mm Z travel: 350 mm Spindle Spindle speed: max. 12,000 rpm Tool holder: BT30 Tool positions: 20 MACHINE DETAILS Dimensions: 1,800 x 3,000 x 2,500 mm Machine weight: 5 t EQUIPMENT - 2 pallets - Coolant supply

Condition: used, Year of construction: 2001, Tortellinatrice Mario Agnelli Type 500.540 Ravioli/Cappelletti Maker. S/No. 915.0 226 (2001) Dkslqyw Rsv U U Tvetel Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), last calibration Aug 2024 Dkolov Rw Eyjqyw Rtol

Condition: good (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 24,000 rpm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS X travel: 3,400 mm Y travel: 2,700 mm Z travel: 1,500 mm Control: Siemens CNC 840 D C-axis rotation range: +400° A-axis swivel range: +100° Clearance between posts: 2,200 mm Spindle Spindle speed: max. 24,000 rpm Spindle power: 15 kW Tool holder: HSK A63 Tools & Pallets Tool changer positions: 20 Number of pallets: 2 Djlqywjv Uqyxs Rtekl Pallet size: 2,500 × 1,400 mm EQUIPMENT - Gantry design with 5 axes

Condition: used, Mezzanine with Horizontal Screw Distribution Line and Automated Dough Shutters. IMI Mixer. S/No. 094040 Associated Hoppers and Pumps, Inspection Walkways Access Ladder and Control Panels. Dkslqyw Rsv U U E Sstsl Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Dkelqywjv Rwz Ie Rtel