Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,130 h, Functionality: fully functional, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Fpjbowckt Hs Hcpu Nog Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Beam on-time: 21,660 h Laser on-time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! OVERVIEW - VAC-60a Gathering Tower - VAC-60c Gathering Tower - HOF-30 Stacker Drop Table Stitchliner 5500 Saddle Stitcher - ACF-30 Gathering and Folding Unit - SPF-30 Saddle Stitcher - HTS-30 Three-Side Trimmer TECHNICAL DETAILS Gathering Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Type: Vacuum and Air Blower Gathering Tower Number of Stations: 6 Error Prevention: Misfeed, Double Feed, and Jam Detection Job Memory: 9 Memory Locations for Repeat Jobs Programs: Double Cycle (Non-Stop Operation), Interposer (1- and 2-Up), Booklet Program, Block Program, Selective Gathering Expandability: Up to 6 towers (36 stations) Format Range: Max. 148 - 500 × 120 - 350 mm Paper weight: 40 - 350 g/m² Loading capacity per station: 130 mm Production speed: up to 9,500 sets/h Fpsbswcf D Hs Hcpu Nog Power supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Double-sided collating Use: Towers can be used separately Weight per tower: 310 kg Stack lowering table Model: Horizon HOF-30 Function: Non-stop operation despite misfeed and double feed detection Gathering system Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30 + HTS-30 (Collating & Folding + Saddle Stitcher + Three-Side Trimmer) Format setting: Fully automatic Format templates: DIN formats and standard fold types Job memory: 200 memory locations for repeat jobs Stitching system Stitching options: Saddle stitch, block stitch, Corner stitching Stapling heads: 2 (optionally expandable to 4) Ring eyelet stitching: possible with ring eyelet stitching heads Staple spacing: 60 - 150 mm Stapling thickness: max. 5 mm (3 mm with ring eyelet) Processing Infeed format: 210 - 500 × 148 - 350 mm Paper weight: 60 - 350 g/m² Processing thickness: 8 - 200 pages Speed: max. 5,500 cycles/h Trimming Untrimmed format: 140 - 350 × 103 - 250 mm Trimmed format: 120 - 312 × 95 - 230 mm Space requirements and weight Installation area: min. 5,709 × 3,240 mm Stitchliner weight: 2,120 kg Power supply: 400 V / 50 Hz Part of the video shows a Horizon ST40, which was replaced with a HOF 30.

Condition: not inspected (used), Year of construction: 2006, overall weight: 1,270 kg, arm reach: 2,655 mm, controller manufacturer: FANUC LTD, type of input current: AC, We offer you, Two six-axis industrial robots R-2000iA/210F with two R-J3IB controllers manufactured in 2006 by the Japanese manufacturer FANUC. Industrial robots R-2000iA/210F: Fpjb Hsv Ewkfjcpu Neg Range and dimensions: - maximum range: 2655mm; - robot height: 2850mm; - working range: *axis 1 ±360° *axis 2 ±135° *axis 3 ±166° *axis 4 ±360° *axis 5 ±125° *axis 6 ±360° Load capacity and precision: - maximum load capacity: 210kg; - repeatability: ±0.2mm; - axis speeds: *axis 1 100°/s *axis 2 90°/s axis 3 95°/s *axis 4 120°/s *axis 5 120°/s *axis 6 190°/s Power and energy consumption: - drive power: 5.4kW; - supply voltage: 380-575V AC, 50/60Hz; - power consumption: average 5kVA; Operating environment: - operating temperature: 0°C to 45°C; - humidity: maximum relative humidity 95% (non-condensing); - degree of protection: IP54 (robot body), IP67 (wrist); - robot weight: 1270kg; Control and software: - controller: R-J3iB, R-30iA (depending on configuration) - user interface: Pendant Teach (programming console) - communication options: Ethernet, DeviceNet, Profibus, Profinet, EtherCAT, Modbus R-J3IB controllers: Technical parameters: - weight: 180kg - voltage: 380-415/440-500VAC - frequency: 50/60Hz - number of phases: 3 - rated power: 12kVA

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Fpjb Hcpswbvgisu Nsg Y-axis travel: 2020 mm Z-axis travel: 600 mm Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Operating parameters Max. waterjet operating pressure: 4,000 bar MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts

Condition: ready for operation (used), Year of construction: 1984, Functionality: fully functional, total length: 1,400 mm, total width: 1,600 mm, total height: 2,200 mm, pressing force: 8 t, TECHNICAL DETAILS Tool holder: Euronorm Type EU 1 (441) Number of stations: 37 Capacity: max. 266,000 tablets/h Pressing data Pressing force: max. 80.0 kN Fpsb Hjwbu Ufscpu Nsg Pre-press force: max. 20.0 kN Tablet thickness: max. 8.5 mm Tablet diameter: max. 25 mm MACHINE DETAILS Space requirement: 1,400 x 1,600 x 2,200 mm EQUIPMENT - Filling curves for 10 mm, 14 mm & 18 mm filling depth - Tableting tool not included.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle bore: 68 mm, overall weight: 3,200 kg, TECHNICAL DETAILS Turning diameter: 200 mm Fobjwbu E Ds Hcpu Njpg Turning diameter over cross slide: 260 mm Spindle bore: 68 mm Control: Siemens with ShopTurn MACHINE DETAILS Total weight: 3,200 kg EQUIPMENT - Driven tools (2 axial, 2 radial) - Schunk 201 chuck - Collet chuck including various collets - Various rotary plates

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, measuring range X-axis: 275 mm, measuring range Y-axis: 250 mm, workpiece length (max.): 4,000 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Scan Performance Measurement Rate: 480,000 measurements/s Scan Area: 275 x 250 mm Resolution: 0.050 mm Accuracy: up to 0.030 mm Volumetric Accuracy: 0.020 mm + 0.060 mm/m Part Size Range: Recommended: 0.1 – 4 m Laser and Light Source Light Source: 7 laser crosshairs (+1 additional line) Laser Class: II (safe for the eye) Fpjbewbuxws Hcpu Nsg Data Formats Output Formats: .dae, .fbx, .ma, .obj, .ply, .stl, .txt, .wrl, .x3d, .x3dz, .zpr Software 3D Software Platform: VXelements Reverse Engineering Software: VXmodel Software (1-Year License) EQUIPMENT - Laptop - 4 m connection cable - 8 m connection cable - Power supply - Original carrying case - the workstation is not included! - 15 sets of positioning targets - Calibration plate - User manual The VXmodel software is a post-processing software integrated into Creaform's VXelements 3D software platform. It enables the seamless transition of 3D scan data to CAD software or 3D printing software. The software allows for the simple and fast processing of 3D scans for additive manufacturing.

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 210860, installation height: 480 mm, pressing force: 150 t, bending length: 3,050 mm, stroke distance: 280 mm, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Fpob Hcswbuuropu Njg Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, Feb Hcsv Ev Tlspu Njpg a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Equipment: -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, turning diameter: 344 mm, travel distance X-axis: 207 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 760 mm, bar passage: 65 mm, controller model: Mazatrol Matrix, Machine with counter spindle and two turrets, each with three axes! TECHNICAL DETAILS Swing diameter – max.: 370 mm / 320 mm Machining diameter – max.: 344 mm / 210 mm Bar capacity – max.: 65 mm Travel paths X1 / X2 axis travel: 207 mm / 141 mm Y1 / Y2 axis travel: 100 mm / 70 mm Z1 / Z2 axis travel: 760 mm / 815 mm Main spindle Speed range: 5,000 rpm Drive power (40% / 100%): 22 kW / 15 kW Spindle bore: 76 mm C-axis: 0.0001° Counter spindle Speed range: 5,000 rpm Drive power (25%): 22 kW / 15 kW C-axis: 0.0001° Tool turret Number of positions: 2 × 12 Tool shank height: 25 mm Boring bar diameter: 40 mm Driven tools Speed: 6,000 rpm Febowburke Hcpu Nopg Drive power: 5.5 kW MACHINE DETAILS Machine weight: 12,500 kg Machine dimensions (L × W × H): 3,510 × 2,810 × 2,480 mm EQUIPMENT - Interface bar feeder - LNS Sprint 565 bar feeder - Additional coolant nozzles on main and counter spindle - Hainbuch Spanntop Nova Axfix SK 65 (main spindle) - Kitagawa B-208 (counter spindle) - Workpiece unloading device with conveyor belt - C-axis Counter spindle 0.0001° - High-pressure coolant 70 bar - Mayfran Consep 2000 II chip conveyor, right-hand ejection - Signal light (yellow)

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 50 h, Functionality: fully functional, Multihead Weigher + Flow Wrapper Machine has only 50 operating hours! TECHNICAL DETAILS Maximum number of bags: 50 bags/min Multihead Weigher CM-B10 Weighing Heads: 10 Weighing Range: 10 - 1,000 g Volume (max.): 1,300 ml Flow Wrapper E-250 Film Roll Diameter (max.): 450 mm Bag Width: 50 - 250 mm Fob Hjwbu Sqecpu Nspg Bag Length (max.): 400 mm Current Setting – Bag Width: 155 mm Current Setting – Bag Length: 350 mm EQUIPMENT - Film holder for rolls up to 450 mm - Manual filling via central hopper - Ring-shaped weighing heads

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, material thickness: 4 mm, product width (min.): 105 mm, product width (max.): 420 mm, product height (max.): 80 mm, product height (min.): 6 mm, product length (max.): 720 mm, product length (min.): 170 mm, A new mainframe computer (IPC) was installed in 2022. Ready for shipment: Machine can be shipped for an additional charge of €1,500! TECHNICAL DETAILS Cycle rate: 60 covers/min Fsb Hewbtmgscpu Njpg Setup time: approx. 5 min Processable formats Cover height: 170 - 720 mm Cover width: 105 - 410 mm Spine width: 6 - 80 mm Material thickness: 1 - 4 mm MACHINE DETAILS Area of application: Processing hardcovers, book covers, and 3-part covers EQUIPMENT - Soft spine feeder

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,099 h, Functionality: fully functional, cutting width (max.): 370 mm, cutting length (max.): 650 mm, paper weight (min.): 110 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Max. format: 650 × 370 mm Min. format: 210 × 210 mm Paper processing Paper weight: 110–350 g/m² Speed: 50 sheets/min MACHINE DETAILS Dimensions: 3,040 × 1,020 × 1,115 mm Weight: 450 kg Counter readings Total paper count: 389,000 Total cut count: 5,700,000 Total crease count: 17,600 Total cross crease count: 23,400 Total operating hours: 1,099 h 15 min Fpjb Hcowbr I Aepu Neg Power supply Voltage: 230 V Frequency: 50 Hz Current consumption: 2.7 A Power consumption: 550 W FEATURES - Suction/blowing air feeder with alignment section - LCD control panel - CPM-01 cross perforation module - 6 integrated cutters (2 edge cuts, 4 card cuts) - 80 memory locations for repeat jobs - Ultrasonic double-feed detection - Diversion tray - Test run program - Print mark detection

Condition: new, Year of construction: 2024, Functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Fpebowbqmdo Hcpu Nsg Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Year of construction: 2017, Condition: not inspected (used), Functionality: unexamined, We offer you, HI-SCAN 6046si detector manufactured in 2017 by Malaysian manufacturer SMITHS DETECTION. X-ray inspection system designed for security checks of baggage, parcels, or screening of technical products. Physical dimensions: length: 2004mm (79 inches) width: 850mm (33 inches) Through-hole size: 62 x 45 cm Fpsb Hcpusv Ewdxo Njg Tape width 53cm X-ray generator: voltage: 160kV; penetration: ability to penetrate steel up to 37mm; detector: high-resolution XADA detector modules; resolution: ability to detect wires up to AWG 41; total weight: 400kg (882 pounds) During the inspection, the machine was disconnected from the power supply - no possibility of testing in operation.

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404605 + 2404606, A double package of two new robots will be auctioned! The robot will be delivered free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Fpobewbqlms Hcpu Neg Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, TECHNICAL DETAILS Production mode: Roll to roll Available outputs: Roll to roll, roll to fold Available printing inserts: 4 × 24" (12") Available perforation cylinders: 24" (12") Perforating station: Available Web guide and web control BST web guiding system: Available BST web inspection camera: Available Production expansions Double production: Possible Turner bars: Available Additional equipment Numbering: Available Technotrans rewind and cooling units: Available Remote control of the inking units: Available IST UV dryers: Available Cutting units: Available Rewind units: Available Fpsb Hcowbqadjpu Njg EQUIPMENT BST Web Guide BST inspection camera Technotrans cooling system IST UV dryer Perforation unit Turning bars Numbering unit Remote ink control system Cutting unit Rewinder Roll-to-fold output

Condition: used, Year of construction: 2023, Plant No. 251-000410, consisting of a trough vibrator, type CB1200, a vibration dryer, type G1000, a peeler centrifuge, type ZA 06, a lifting and tilting device on the outlet side, a lifting and tilting device on the inlet side, a wastewater treatment plant, and a central control cabinet Fjbsv Tyu Ne Hcpu Nspg

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Production speed: up to 4,500 booklets/h Format range Open format – min.: 120 × 210 mm Open format – max.: 356 × 610 mm Finished format – min.: 75 × 120 mm Finished format – max.: 305 × 356 mm Paper processing Paper weights: 52–300 g/m² Feed capacity per station: 65 mm MACHINE DETAILS Fpjb Hewbrylocpu Neg Application range: collating, creasing, folding, stapling, and trimming Dimensions & Weight Dimensions: 4,009 × 3,252 × 1,972 mm Weight: 2,111 kg Piece counter: approx. 7.5 million pieces Power supply Voltage: 230 V Frequency: 50 Hz Current consumption: 5.3 A Power consumption: 980 W EQUIPMENT - Two DSC 10 collating towers with a total of 20 stations - DBMS-F2 creasing and folding unit - DBMS-S stitching unit with two Hohner stitching heads - DBMS-T front trimmer - DKT-200 head and foot trimming unit - Production of a wide range of booklet sizes and thicknesses possible

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 202103240, working width: 320 mm, tank capacity: 200 l, TECHNICAL DETAILS Capacity: 200 l Fpsbewbhmne Hcpu Nog Outer diameter: 1,200 mm Height: 905 mm Inner bowl dimensions: 320 mm Power Heating efficiency: 1.5 × 6 Motor power: 1.5 kW MACHINE DETAILS Weight: 550 kg Voltage: 400 V / 3 PH Operating temperature: 3 - 40 °C

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404603, load capacity: 220 kg, arm reach: 2,701 mm, The robot will be provided free of charge. TECHNICAL DETAILS Fpob Hjwbqgwscpu Nsg Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 773, paper width (max.): 260 mm, 8-Color Semi-Rotary UV Offset TECHNICAL DETAILS Printing process: Semi-rotary waterless offset for labels, PVC, and films Inking units: 8 (with UV) Print type: 4+4 UV offset Print width: max. 260 mm Print format: max. 250 mm Fpebewbhtbe Hcpu Neg Speed: 50–180 Material flow Material feed: Roll to roll Unwind unit: included Rewind unit: included EQUIPMENT - Unwind unit - Rewind unit - UV drying

Year of construction: 2023, Condition: used, Serial No. 1468, consisting of a container tilting device, safety light barrier, 2 steep conveyors, each with a cleated conveyor belt, working width approx. 200 mm, machining cell, 2 separation stations, 4 thread formers M8x1.25, control system, PC system Fobev Tydqe Hcpu Njpg

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Components: - DBM 5000 Booklet Stitcher - DBM-LST Long Edge Trimmer - DSF-2000 Feeder - DBM 5000T Front Trimmer Production Speed: up to 5,000 sets/h Stapling and Folding Area Saddle Stitching - Length: 170 to 500 mm Saddle Stitching - Width: 120 to 356 mm Side/Corner Stitching Formats: B5 LEF, A4 SEF / LEF, B4 SEF (partially limited) Number of Staples: 0 to 2 Stapling Thickness: up to 5 mm Wire Gauge: No. 25 to 27 Folding Capacity: up to 25 sheets Paper Handling Paper Weight - Plain Paper: 64 to 127.9 g/m² Paper Weight - Fine Art/Coated Paper: 84.9 to 157 g/m² Paper weight – Cover: up to 300 g/m² MACHINE DETAILS Suitable for: Digital and offset printing Piece count: 9,020,711 pieces Dimensions & Weight Dimensions (with belt delivery): 2,230 × 865 × 1,300 mm Weight: 412 kg Power supply Voltage: 120 to 240 V Frequency: 50/60 Hz Current consumption: 6.5 - 3.8 A Fpob Hewbrcaecpu Nog FEATURES - LCD touch panel for control - 12 storable jobs - Front trimmer can be bypassed if necessary - Set-by-set and sheet-by-sheet feeding possible

Condition: good (used), Year of construction: 2021, Make: SPINNER, Type: TC600 65SMCY, Year of manufacture: 2021, Serial no. AT1207, max. swing Ø 600 mm, max. turning Ø 400 mm, max. turning length 650 mm, travel x/y/z = 275 / Y +50/-40/ 700 mm, max. rapid traverse x/y/z = 15/15/2 m/min, turning spindle 1: max. speed 4,000 rpm, spindle nose A8/DIN, chuck 250 mm, spindle power 21/27 kW, torque 201/258 Nm, turning spindle 2: max. speed 6,000 rpm, spindle nose Ø 110 mm, chuck 165 mm, spindle power 20/12 kW, torque 64/76 Nm, tailstock: taper mount MK4, quill Ø NC-Body, stroke 570 mm, tool turret (driven Tools) 16x VDI30/BMT45; 12x VDI40, counter spindle, Siemens control system, type 840DE, Spinner touch panel, Shopturn handheld unit, measuring probe for tool measurement, Spinner workpiece automation, type Robobox, consisting of a workpiece pallet, 5 drawers, dimensions WxHxD = 800x600x200 mm each, Fanuc loading/unloading robot, type M-10ID12, load capacity 12 kg, reach 1,420 mm +++ Attention: Machine is part of an online auction! +++ Fpsbsv Txq Ns Hcpu Neg