Second-hand machinery for sale (2,406)

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dslnewh Tygo E S Hvocg

Condition: used, Year of construction: 2024, EMCLAB EMC-11S-UV spectrophotometer, built in 2024, from a food laboratory Dsln E Sowhw T Ds Hvocg Note: This is a starting price. The sale will be conducted in an online auction with the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: good (used), Year of construction: 1971, General overhaul 2021, 6 rollers, pipe diameter 5 – 45mm, straightening speed 37.5-75 m/min (3-speed manual transmission), drive power 2x 4 KW Dcsln Eswg Hfyo S Hvjg

Condition: good (used), Year of construction: 2020, operating hours: 2,948 h, Functionality: fully functional, machine/vehicle number: SNSF-0701 / SN71558850, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, controller model: Heidenhain iTNC 640, TECHNICAL DETAILS X-axis travel: 2,600 mm Y-axis travel: 1,600 mm Z-axis travel: 800 mm Control: Heidenhain iTNC 640 Feed rate (X, Y, Z): 10,000 mm/min Rapid traverse Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 15 m/min Table Table length: 2,500 mm Table width: 1,500 mm Table load: 9,000 kg Distance from table to spindle center: 950 mm Spindle Spindle speed (max.): 6,000 rpm Spindle motor power: 30,000 W Cooling: through spindle Djlnswh Trpo E S Hvjcg Tool technology Tool holder: 50 mm Tool diameter: 125 mm Tool length: 380 mm Tool weight: 18,000 g Number of slots in tool magazine: 40 MACHINE DETAILS Total weight: 22,000 kg EQUIPMENT - Spindle cooling - Documentation

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 107963, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP U100, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Table Max. workpiece dimensions: 1,300 x 560 mm Distance from table surface to spindle nose: 150 – 610 mm Deln E S Hewh Tfvovecg Max. table load: 900 kg Spindle Spindle speed: 15,000 rpm Spindle power: 22 / 18.5 kW Cooling through spindle: 20 bar Feed rates Rapid traverse X/Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Working feed X/Y/Z-axis: 32 m/min Tool magazine Tool capacity: 20 tools Tool holder: BT 40 Tool selection: Memory Random MACHINE DETAILS Footprint: 2,510 x 3,100 mm Machine height: 2,476 mm Machine weight: 7,500 kg EQUIPMENT - Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AL1/004666, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,018 mm, travel distance Z-axis: 200 mm, controller model: Windows XP, overall weight: 2,800 kg, Machine will be loaded free of charge! TECHNICAL DETAILS Operating system: Windows XP with 15" CRT color screen & Intel Celeron 2 GHz Travel paths and working areas X-axis Travel path: 2,650 mm Electric mandrel working area: 2,903 mm Horizontal drilling heads: 2 (64 mm spacing) Disc milling unit (X-direction): integrated, 4,000 rpm, 2.2 kW, Ø 120 mm Y-axis Travel path (vertical drilling area): 1,018 mm Electric mandrel working area: 1,240 mm Horizontal drilling heads: 1 Z-axis Travel path: 200 mm Panels Max. panel size (double-station machining): 1,180 mm Max. panel thickness: 180 mm Speeds X/Y travel speed: 54 m/min Travel speed Z: 11.5 m/min Milling unit (electric mandrel) Spindle type: HSK 63 Power: 7.5 kW Speed range: 1,500 – 24,000 rpm Tool holder: HSK 63, straight tool holder Tool magazine (type R8L): 8 positions Max. tool diameter: Ø 120 mm Max. tool weight per holder: 4.5 kg Max. total weight (tools + holder): 22 kg Horizontal milling unit (2 outputs) Speed range: 9,000 – 18,000 rpm Motor power: 3 kW (4 HP) Front tool: Ø 20 mm, length 110 mm Rear tool: Ø 12 mm, length 80 mm Circular saw blade: Ø 100 mm Drives and power Main spindle power: 2.2 kW (3 HP) Main spindle speed: 4,000 rpm Spindle mount: M10 EQUIPMENT - 12 vertical drilling spindles (7 in X, 5 in Y) - 4 panel support tables, each 1,000 mm long - 2 additional universal supports, 25 mm high Dcjln Eewh Syxe S Hvog - 8 automatic round vacuum cups with aluminum bodies (2 per table) - 4 vacuum cup holders for contour machining - Vacuum pump with 100 m³/h capacity - Vacuum conveyor - Automatic central lubrication for X and Y axes - Pneumatic loading aids for 1,000 mm tables

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Dcsln Eswh Tyye S Hvjg

Condition: used, Year of construction: 2022, BIOBASE BK-CA1000D CO2 incubator, built in 2022, volume: 1,000 l, W/H/D approx. 1,400 / 1,870 / 840 mm, various rust spots Djlnswhwzne E S Hvscg Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: good (used), Year of construction: 2009, 3 ZF 180, switch and control cabinets Dcoln E S Howg Hd Ajvsg

Condition: like new (used), Year of construction: 2018, operating hours: 3,920 h, Functionality: fully functional, machine/vehicle number: VT-FA-IQ80-71, type of input current: three-phase, cutting width (max.): 1,800 mm, cutting height (max.): 80 mm, TECHNICAL DETAILS Dslnjwh R Hdj E S Hvjcg Cutting height (max.): 80 mm Cutting width (max.): 1,800 mm MACHINE DETAILS Input power type: three-phase

Year of construction: 2005, Condition: ready for operation (used), Functionality: fully functional, screw diameter: 40 mm, machine/vehicle number: DE27692, TECHNICAL DETAILS Screw diameter: 2 x Ø 40 mm L/D ratio: 44D Drive power: 100 kW Processable materials: PE, PP, PS, ABS EQUIPMENT Dceljwh R A Ssn E S Hveg - Co-rotating screw conveyor - Degassing system - Segmented screws and barrels - Connection for side feeder

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Doln Eowh Ty He S Hvocg

Condition: used, CCM MUS-MAX feed/grain mixer, stainless steel, capacity: 500 kg, gear motor: 3.0 kW, rust spots Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus premium and VAT). Please follow the link for more photos and information. Dcelswhwzhsn E S Hveg

Condition: good (used), Year of construction: 1995, Serial No. 6-2, control, Siemens, type 840C, 2 horizontal spindles, 2 cross slides, swivel arm for workpiece loading and unloading, workpiece automation Dcoljwg E Ugjn E S Hveg

Year of construction: 2025, Condition: used, machine/vehicle number: 1153, Shaft measuring machine, Manufacturer: CARL MAHR, Type: MarShaft SCOPE 250 Plus, Year of manufacture: 2016, Serial No.: 1153, with bearing, C-axis PC DELL Optiplex XE3, Intel Core i5, keyboard and mouse Delnowh Txvj E S Hvjcg

Condition: used, machine/vehicle number: 1101284208R002, WITEG WAC-80R (PED) autoclave, volume: 80 l, W/H/D approx. 815 / 1,200 / 585 mm, on casters, integrated printer, power cable defective Deln Eewhwywe S Hvocg Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: good (used), Year of construction: 1975, Pressure max. 50t, press control with display Siemens Simatic HMI, safety device Sick Dceln E Sswg Hdcj Hvog

Year of construction: 2022, Condition: used, CO2 incubator PHCBI MCO-801C-PE, built in 2022, volume: 851 l, W/H/D approx. 970 / 2,040 / 850 mm Dsln Ejwhwydj S Hvjcg Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: good (used), Year of construction: 2011, Serial No. A11006-01, max. press force 75 t, stroke rate 50-150 strokes/min., throat 330 mm, ram adjustment 80 mm, stroke 120 mm, connected load 16 kW, hydraulic clamping station, Roemheld Dcolewg Hcren E S Hveg

Condition: good (used), Year of construction: 2012, Serial No. A11005-01, max. pressure 600 t, press control with display, Siemens, type Multi Panel Touch, stroke rate 15-50 strokes/min., ram adjustment 15 mm, stroke 250 mm, connected load 60 KW, weight 45.5 t, Skako feed station, continuous heating furnace, conveyor belt, workpiece automation, MSG, extraction, URS, type Smog-Hog SH 40m T3, inspection system, tech 3D, built in 2012, Serial No. 096951199, Cognex camera, Epson robot, PLC system control with Siemens Simatic Multi Panel Touch display, switch and control cabinets, operator panels, safety devices Dcjln Eswg Hbuj S Hvog

Condition: good (used), Year of construction: 2022, Serial No. 8413, for cylindrical components (polishing, deburring) PLC control with display, Siemens, type HMI Touch, coolant system with belt filter, Stevens, type PF90, oil mist extraction, LTA, type E 120 X-1-H, 1 inventory of accessories and spare parts Deljwg Hadon E S Hvecg

Condition: good (used), Year of construction: 1994, Serial No. 5-5, control, Siemens, type 3T, 2 horizontal spindles, 2 cross slides, swivel arm for workpiece loading and unloading, workpiece automation Dcsln E Sswg E Uae Hvog

Condition: good (used), Year of construction: 2012, Serial No. 68180, control, Siemens, type 840D solution line, 2x3 axes (X/Z/C), 2 spindles, 2x 12-station turrets, driven tool stations, max. speed 4,000 rpm, 2x face chucks, Hydac 170S spindle cooling, workpiece automation, remote diagnostics for NC/MMC Dcsln E S Hswg E Tpeveg

Year of construction: 2014, Condition: good (used), Serial No. 2.930, wire-link belt, throughput width 250 mm, throughput height 100 mm, spray cleaning with flat jet nozzles, multi-tank system (500 l rinse tank + 800 l wash tank), heating, Siemens PLC control with touch display, switch and control cabinets, stainless steel collecting tray Dcjln Eswg E Nwj S Hvjg

Condition: good (used), Year of construction: 2014, operating hours: 33,703 h, Serial no. 200167, control, make Siemens, type 840 Dsl (index C200-4D SL), bar capacity 40 mm, 6 work spindles, 10 slide units with X/Z NC axis, 2 synchronous spindles (swivel axis and Z axis NC controlled in positions 5.2 and 6.1), 2x three-jaw chucks Röhm KFD-HS 110, 1x boring device for three-jaw chuck, rear machining device on L 6.2, 1 set of driven tool carriers, bundle loader, make IEMCA, type SIR MS40F, model 33, year 2014, serial no. 02143 MB03, with tapping unit and minimum quantity lubrication, 6 material slides/rotary sleeves for D18 mm, 2 sets of internal clamping sleeves D18/D32 mm, drill breakage detection, coolant system, oil mist extraction, Büchel, CO2 extinguishing system, Kraft and Bauer, Operating hours: 33,703 Dcjln E S Hswg E Hpsvog