KEG filling line

ATS Wibbing

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data Manufacturer: ATS Wibbing GmbH Machine Type: Fully automatic KEG cleaning and filling line Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system Year of Manufacture: 2025 Availability: approx. 2-3 months Capacity: approx. 30 – 35 KEG/h Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm Control System: Siemens S7-1500 HMI: Touchpanel with operator guidance External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet Expansion vessel 150 l Pallet handling aid Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C Warranty: 2 years manufacturer warranty Fodpfx Aajy Rk Igeljpg

Condition: like new (used), Year of construction: 2017, operating hours: 610 h, functionality: fully functional, 1) 12-STATION RINSER IN 2 PHASES (WATER+AIR) for bottles with a maximum diameter of 115 mm. The rinsing process takes place only when bottles are present. The parts of the rinsing nozzles have no contact with the bottle neck. 2) 12-STATION ELECTROPNEUMATIC HIGH-PRESSURE FILLER for bottles with a maximum diameter of 115 mm The fill level can be electrically adjusted from the control panel without manual intervention from 25 to 100 mm below the bottle neck. Each filling valve is equipped with a sterilization bottle for cleaning and sterilizing the machine. The sterilization bottles are positioned manually. The filling valve operates with still and carbonated liquids from 0 to 8 bar. The fill level is precise 100 %. 3) MONOHEAD Crown Capper for D26 crown caps. Screw Cap can be installed for an additional fee Feeding and transfer between stations is performed by screw that guide and synchronize the bottles. Monoblock equipped with: - Protective enclosure compliant with CE standards, featuring tempered glass doors - Universal screw - Motor-adjustable side guides Fpodpjyukiwjfx Aaleg - Dummy bottles for sterilizing the rinsers - PLC and TOUCHSCREEN control panel - Electric height adjustment of all stations OPTIONS: - Washing of the bottles on exit using 7 nozzles, - Interior lighting with 4 LED strips - Machine equipped for remote assist. Capacity*: 1,100 liters/hour Speed: 1,000 - 3,000 bottles/hour (INVERTER) * Actual capacity depends on several factors: A) Liquid B) Filling temperature C) Bottle pressure D) Bottle type With Filler we will give for free also the packing table

Condition: used, Year of construction: 1996, Chamber pasteuriser for 4 pallets Additional title: Pasteuriser for 4 pallets Pallet spaces: 4 pieces Length: 530 cm Fpsdswrbduspfx Aaljg Width: 220 cm Height: 305 cm Material: stainless steel Position: free standing

Condition: used, Year of construction: 2013, Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color) Fpjdpfoukafrox Aaleg

Condition: used, Year of construction: 2013, KEG filler, make Framax, type: F-2-Ecodraft, 2 filling stations, made of stainless steel, Fpodpfxjrxuh So Aaleg control cabinet with touch panel, built on base frame, built in 2013; overall dimensions L: 850 mm x W: 1100 mm x H: 2000 mm

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Fedpfx Aaoyk E Srolepg

Condition: used, Year of construction: 1978, Pasteurising chamber Length: 1,7 m Width: 1,7 m Height: 2,7 m Weight: 2 t Material: stainless steel Fpsdpfx Aaew Tmugjlog

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones CSD PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones CSD PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across carbonated soft drinks, cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of manufacture: 2010 Working hours: approx. 47,000 Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L) Products handled: carbonated soft drinks, cider, sparkling water, still water, juices with CO2 Filling technology: Ultra-clean, isobaric, volumetric PET filling Current product: Apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Fedpfeyhbmtex Aalopg Controls: Siemens Simatic S7 PLC platform Main Equipment Scope CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h Process: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanks Preforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unit Caps: Cassner cap feeding with cap rinsing and sterilization Blow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor) Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspector Conveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak tester Labeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glue Secondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicator Pack coding: Leisinger Jet 3 ink coder Palletizing: Krones Robopox Modulpal (2016) Advanced Automation & Control Systems Line Control & PLC Siemens Simatic S7-series PLC for coordinated line control, interlocks and diagnostics Integrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cycles Recipe and parameter management supporting fast changeovers between PET formats Quality Assurance & Traceability Laser date coding (Domino DDC 3) on primary packaging; inkjet coding (Leisinger Jet 3) on packs In-line inspection with Krones Checkmat systems for fill level and label presence/position Leak detection via Krones Flowliner for container integrity Production Line Integration Capabilities Upstream (Preforms to Bottles) Automated preform handling: tipper, conveyors and Krones Contifeed RS for steady feed Preform cleaning (Prejet Linear) to protect blowing ...

Condition: reconditioned (used), Year of construction: 1998, KEG system, manufacturer: GEA Till, type: KEG-BOY C2, for approx. 25 KEGs/hour, for KEGs with flat fitting, with 1 internal cleaning station and 1 filling station, with 1 cleaning agent tank, with control cabinet. The system is overhauled and equipped with a new control unit. Fpedpfx Aaew Hxuyolog

Condition: used, Year of construction: 2012, KEG filler, make Lambrechts, semi-automatic, 60 KEGs/h at one-way KEGs, 1 filling stations, in stainless steel, control cabinet with touch panel, compact design, overall dimensions L: 800 mm x W: 870 mm x H: 1980 mm , year 2012 Fsdpfxorxuits Aalspg