Scholten Tanks GmbH

Condition: good (used), Fuel storage tank, 20 m³ Gtodpsyr Tdfsfx Ahvew

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 980 l, usable tank capacity: 980 l, total length: 1,190 mm, total width: 990 mm, total height: 1,250 mm, wall material: steel, • 980-litre tank. Standard colour black 9005 micro-textured. • Tanks specifically designed for the transportation of diesel fuel for refuelling heavy construction, agricultural, and excavation machinery. • ADR approved for road transport without the need for a dangerous goods transport permit. • Comply with all safety regulations for both road use and the carriage of hazardous materials. - Diesel transport tank with cover - Capacity: 980 litres. Colour: black 9005 micro-texture. - Tanks specifically intended for the transport of diesel fuel to supply heavy machinery, agricultural equipment, and excavation machinery. - ADR approved for road transport without the requirement for a dangerous goods licence. - Unladen weight: approx. 230 kg Gjdpfoyrr Hlex Ahvotw - Dimensions: 1190 x 990 x 1250 mm *Dimensions, images, weight, and design are indicative and may differ from those shown.

Condition: like new (used), Product discharge by gravity, by means of side discharge with flat bottom. Gtodpfx Asyn Hd Dehvsw

Condition: good (used), Note: The IBC containers were filled with an acid for animal feed (main component: formic acid). Not classified as dangerous goods under ADR, but labeling is required according to the Hazardous Substances Ordinance. The containers have been emptied but not cleaned. Godpfx Ahsyligvovjtw Scope of delivery includes: 01x water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 liters incl. tap on metal, wooden or plastic pallet Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further transportation or shipment of this item will incur additional costs, which can be requested from us separately depending on place of delivery or scope of delivery.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: Keine, Main components: Brewing house with 2 kettles, output 140 liters, gas-heated, with spent grain crane and electrically powered cutter. 2 fermentation tanks for top-fermented beers, each 300 liters, stainless steel, cooled. 5 control units for brewhouse, fermentation tanks, and sparge water. 1 counter-pressure bottle filler. 1 keg cleaning machine. 1 bottle sterilizer. 1 cooling unit for fermentation. Various dispensing tanks of 20, 30, and 50 liters. Various beer memorabilia. Library with approx. 50 beer books. Godpfoyi Hdtex Ahvetw

Condition: used, functionality: fully functional, tank capacity: 100,000 l, Item: AV-12243-Wedholms-100m3 Gedpfx Aoyi E Htshvstw Exterior dimensions: Dia Ø 3800 mm, Total height 11000 mm. Vertical stainless steel tank – 1 pc. Insulated with 100 mm and finished with a white trapezoidal plate. Side-mounted agitator and CIP system. Brand: Wedholms Material: AISI 304

Condition: used, functionality: fully functional, We are giving away this double-walled former Eisen3 tank with a capacity of approx. 15-20 cbm. After cleaning, it can be used for various purposes. The tank has a diameter of approx. 3.50 m and a height of approx. 5.0 m and is available for self-collection in 74906 Bad Rappenau. Gsdpfxeyh T Sfo Ahvetw

Condition: used, Reportedly unused PalPharma Handling approximately 2,100 litre working capacity 316L stainless steel IBC. Unit measures 1,000mm long x 1,200mm wide x 1,500mm straight side with a 900mm conical bottom height. Unit includes top charge and bottom discharge valves. Gtsdsyh I T Djpfx Ahvow Dimensions: 39.3701 x 47.244 x 94.488

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side Gtedsyh I Tqjpfx Ahvow

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, tank capacity: 36,784 l, total height: 6,245 mm, inner diameter: 3,400 mm, outer diameter: 3,770 mm, overall weight: 4,000 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 2 x 37 m³ CCT Vessels / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 2 Total volume: approx. 36,784 liters Tank type: Pressure vessel Condition: used Suitable for food use: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Cone wall thickness: approx. 3.5-5 mm Top head wall thickness: approx. 6 mm Shell/Cylinder wall thickness: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: Stainless steel V2A (1.4301) Internal surface: ground and pickled Heating/Cooling System Cooling medium: Glycol Operating pressure: 3.0 bar Operating temperature: -3 °C Heating/Cooling system material: Stainless steel V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. capacity 1 x cone cooling zone with approx. 40 ltr. capacity Insulation Insulation thickness: approx. 150 mm (shell + top head), cone: 100 mm Insulation material: PU foam Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminium trapezoidal sheet Gtedpfx Ahsyhzrgjvew Equipment Mounting type: Suspension lugs Number: 4 Fastening: fixed Top head type: Torispherical head Lower head type: Conical Top head: 1 x manway DN 1000 with insulated hood and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray tube (removable) 1 x Cleaning-Air valve combination (RLV) consisting of: 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x temperature measuring connection with insulated box 1 x condensate pipe DN 32 1 x sampling line DN 10 1 x cable protection pipe DN 50 1 x cleaning line DN 50 1 x return manifold DN 40 (cooling) 1 x supply cooling DN 25 1 x cooling vent DN 10 1 x cooling drain DN 20 Lower head/cone: 1 x sample valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded outlet DN 100 Documentation: Drawing Inspection book TÜV certificate

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Godpfx Aeyhzq Ashvjtw Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: used, Cylinders, bottles used for gas transport 20/40/50 L, 200/300 bar T50 steel gas cylinder, bottle 50 L 200 bar 288 pieces Gjdpfjyfpg Nox Ahvjtw T40 steel gas cylinder, bottle 40 L 200 bar 288 pieces T23 steel gas cylinder, bottle 20 L 300 bar 288 pieces All bottles are complete, empty and ready for export.

Condition: good (used), Bibby 5000L Holding tank Godsyfhr Dspfx Ahvetw 316 Stainless, 5000L holding tank, central bottom discharge with level sensor

Condition: used, tank capacity: 23,600 l, total length: 5,000 mm, total width: 3,000 mm, total height: 1,750 mm, with manhole and outlet; test pressure: 2.3 mWC; previously used as fresh water tank Gsdpfx Aheycr Nnovjtw

Condition: used, tank capacity: 600 l, GENERAL Design: upright Remarks: 1 pipeline and 2 floats inside the tank; small sheet metal cut-outs in the tank lid; bottom slightly bulged upwards in the outlet area Internal diameter: 890 mm Total height: 1,500 mm Top head: bolted lid with folding segment Location: Bremen Volume: 600 liters Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 900 mm Last application: textile industry TANK Mounting type: feet Gjdpfx Aoyclw Sshvjtw Number of feet: 3 pieces EQUIPMENT Outlet: DN50 flange Note: light residues MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, Year of construction: 2001, tank capacity: 46,000 l, GENERAL Equipment: Crane lugs Design: Suspended Year of manufacture: 2001 Notes: Internal residues; 4 double lugs made of Fe Internal diameter: 3,000 mm Total height: 9,200 mm Location: Bremen Technical documentation: Drawing Nameplate: Volume: 46,000 liters Wall thickness, cylinder: 3 mm Product-contacting material: V2A 1.4301 (AISI 304) Condition: Used Cylindrical height: 6,000 mm Previous use: Caustic soda VESSEL Max. permissible operating temperature: 50°C Lower bottom: Conical bottom Gtedpeyclw Esfx Ahvjw Support type: Lug supports EQUIPMENT Manway / dome: On top head (DN 600) Outlet: Available Note: Metallic discolorations inside TECHNICAL DATA / DIMENSIONS Bottoms wall thickness: 3 mm

Condition: used, tank capacity: 6,000 l, GENERAL Features: Ventilation/inlet-outlet, spray head, crane lugs Design: upright Remarks: Manhole diameter 420 mm; one of the tanks is slightly shorter in overall height; outlet butterfly valves defective; various pipe sections on the tanks (mostly cut off) Internal diameter: 1,750 mm Gtedpfxsyclwre Ahvjw Overall height: 4,050 mm Location: Bremen Nameplate: Volume: 6,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,490 mm Last application: CIP tank in a dairy TANK Mounting: height-adjustable legs Number of legs: 3 pieces EQUIPMENT Manhole / dome: on the top head Outlet: DN50 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Leg material: stainless steel

Condition: used, tank capacity: 400 l, GENERAL Gtedjyclvzepfx Ahvow Equipment: Disc valve Design: Container Remarks: Manufacturer: Bohle; Frame made of stainless steel V2A (dimensions approx. 1200 x 800 mm); 1 longitudinal sight glass in the cylinder; Sampling lances and 1 sieve insert inside the container Inner diameter: 750 mm Total width: 800 mm Total height: 1,850 mm Total length: 1,260 mm Top cover: Removable / Hinged top cover Location: Bremen Volume: 400 liters Wall thickness cylinder: 2.0 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: Used Last application: Pharmaceutical industry CONTAINER Base type: Frame EQUIPMENT Outlet: 150 mm MATERIAL QUALITY Interior surface: High gloss TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 1.9 mm Top cover wall thickness: 1.8 mm

Condition: used, Year of construction: 2004, tank capacity: 6,500 l, GENERAL Equipment: Spray head, lifting lugs Design: upright Year of manufacture: 2004 Remarks: Cone height approx. 1300 mm; manway approx. 415 x 500 mm; 1 rectangular opening approx. 350 x 440 mm without cover at the top; one tank has a small crack in the cone bottom at the agitator connection (this tank also shows dents in the cylinder in the area of the hinged segment); on another tank, the agitator flange of the lower propeller agitator appears to be damaged (see photos) Internal diameter: 1,600 mm Overall height: 5,550 mm Top head: welded cover with hinged segment Agitator: propeller Agitator type: propeller Location: Bremen Name plate: Volume: 6,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,960 mm Previous application: Laboratory production TANK Max. allowable operating temperature: 90 °C Gsdpsyclvujfx Ahvstw Bottom: conical bottom Support design: height-adjustable feet Number of feet: 4 pcs FEATURES Manway / access port: on cylinder Outlet: 80 mm Note: minor residues MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Baffles: Agitator arrangement: central, on top Agitator features: agitator data not legible on this unit; agitator motors show signs of corrosion; one agitator in the cone missing name plate SECOND AGITATOR Agitator arrangement: bottom Speed: 1450 rpm Voltage: 400/690 Volt Power: 5.5 kW

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Rectangular opening approx. 1000 x 1000 mm in the top cover; minor internal and external corrosion Outer diameter: 3,000 mm Inner diameter: 2,890 mm Total height: 3,350 mm Insulation: available Agitator: propeller Location: Bremen Nameplate: Volume: 15,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,240 mm Last application: laboratory production TANK Mounting type: height-adjustable feet Number of feet: 6 units INSULATION Gsdpsyclvbefx Ahvstw Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of feet: stainless steel AGITATOR Agitator location: eccentric in the top cover

Condition: used, tank capacity: 40 l, GENERAL Design: upright Remarks: Lid opening approx. 220 mm (small cutout in the lid, see photos); slight metallic discoloration inside; without bottom outlet Gtsdpfx Aoycluwehvow Inner diameter: 350 mm Total height: 560 mm Top: open with loose lid Location: Bremen Volume: 40 liters Cylinder wall thickness: 1.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 360 mm Last use: pharmaceuticals CONTAINER Base type: skirted base EQUIPMENT Outlet: not available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 1.0 mm Top wall thickness: 1.1 mm

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: upright Remarks: 1 pipeline inside the tank; heavier internal residues Speed: 100 / 200 RPM Internal diameter: 1,540 mm Gedpfxsycluqe Ahvstw Total height: 4,600 mm Power: 4.7 / 5.9 kW Agitator: propeller Location: Bremen Nameplate: Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Last application: paint industry TANK Base design: on legs Number of legs: 4 units EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: flange DN80 MATERIAL SPECIFICATION Material of legs: stainless steel AGITATOR Voltage: 400 V Bottom bearing: Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 9,500 l, GENERAL Equipment: Disc valve Design: upright Remarks: 5 loose insertable feet made of Fe; manhole approx. 320 x 420 mm; stronger residues/adhesions inside the tanks; 1 tank with dents in the top head; disc valve lever missing on one tank Internal diameter: 1,940 mm Overall height: 3,900 mm Location: Bremen Volume: 9,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,160 mm Last use: spirits TANK Support type: height-adjustable feet Gtedpfoycluksx Ahvow Number of feet: 5 pieces EQUIPMENT Manhole / Dome: in cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Feet material: steel

Condition: used, tank capacity: 400 l, GENERAL INFORMATION Features: Crane lugs Design: Vertical Gtsdpfx Ahsycludjvow Remarks: Cone height approx. 400 mm; three-legged V2A frame; 3 short pipe connections inside the vessel Internal diameter: 890 mm Total height: 1,520 mm Location: Bremen Volume: 400 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 570 mm Last intended use: Organic substances VESSEL Bottom: Conical bottom Support type: Frame FEATURES Manway / Dome: on the top cover (DN 400) Outlet: 72 mm

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Venting/bleeding, ball valve, spray head, crane lugs Design: vertical Remarks: Manway diameter approx. 415 mm; tank with residues inside; slight signs of corrosion inside and outside on the vessel Speed: 1420 rpm Outside diameter: 2,600 mm Inside diameter: 2,490 mm Total height: 4,700 mm Insulation: available Power: 3 kW Agitator: propeller Location: Bremen Nameplate: Volume: 15,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Previous use: Laboratory production VESSEL Mounting type: Height-adjustable feet Number of feet: 8 pcs INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manway/dome: in the top head Outlet: DN50 DIN 11851 Note: Dents on insulation jacket Godpfxoyclt Te Ahvjtw MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Voltage: 230/400 volts Agitator mounting: side-mounted on cylinder Agitator equipment: External agitator components with signs of corrosion (see photos)