South Auckland Forgings Engineering

Condition: new, Year of construction: 2025, pressing force: 20 t, 20 T Single-Column Forging Press (DCS-20) Technical Specifications - Press Pressing capacity: 5–20 t (adjustable) Maximum installation height: 700 mm Table usable area: 500 x 600 mm Ram usable area: 500 x 600 mm Frame type: C-frame Cjdpfxoyght Ro Ac Nopu Table height from floor: 800 mm Overall dimensions (W x D x H): approx. 1,450 x 1,500 x 2,400 mm Total weight: approx. 1,900 kg T-slots: according to DIN 650 (18 mm) or machined to customer specifications Hydraulic Cylinder Piston stroke: 0–500 mm (adjustable) Cylinder diameter: Ø 90 mm (1 pc.) Piston rod diameter: Ø 60 mm (1 pc.) Rapid traverse cylinder diameter: Ø 40 mm (1 pc.) Rapid traverse piston rod diameter: Ø 25 mm (1 pc.) Max. working pressure: 250 bar (adjustable) Return speed: 140 mm/s Rapid traverse speed: 140 mm/s Pressing speed: 4–10 mm/s (adjustable) Pressure build-up time (closed tool): max. 2 s (steel on steel) Hydraulic Unit Hydraulic pump: REXROTH, 22 l/min (1 pc.) Motor power: 7.5 kW (1 pc.) Pressure accuracy during pressing stroke: ±5 bar Oil tank capacity: 150 l Mounting: Hydraulic unit mounted at the rear/top of the press Hydraulic manifold and valves: HYDROPACK Air filter and oil filter: FILTREC Oil level: electronic oil level switch Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Main hydraulic motor connection: 7.5 kW Total connected load: approx. 10 kW

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Manufacturer: GFU Model: HP 200 Year of manufacture: 2009 Serial no.: 09/1025 with extensive accessories Cpjdjycl Idepfx Ac Nju

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Codpfx Aeyacyxoc Nepu

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven Codpfox Ezuyex Ac Njpu - Production capacity: up to 600 ends per minute

Condition: used, Force 1600 tons Slide stroke 300 mm Distance adjustment between table and slider 10 mm Cpjdpfxex Ek Nte Ac Nou Slide strokes per minute 75 spm Length of a rod 920 mm Closed height (min distance table–slide) 660 mm Table dimensions 940 × 1200 mm Table height above floor level 450 mm Slide dimensions 860 × 910 mm Lateral window (h/w) 560x600 mm Main motor 110 kW Dimensions 5060x3940x5125 mm Press weight 120 tons

Condition: used, Year of construction: 1982, functionality: fully functional, Eccentric; 15 kW; Capacity 150 t; strokes per minute 120; ram stroke 175 mm Codpfx Acsxz A H Te Nspu

Condition: ready for operation (used), functionality: fully functional, total height: 3,200 mm, total length: 3,500 mm, total width: 1,500 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Cpedpfx Acswvi Hxe Nju Ram weight: 400 kg Blow frequency: 120/min MACHINE DETAILS Total weight: 10,000 kg Overall height: 3,200 mm Overall length: 3,500 mm Overall width: 1,500 mm

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts Cpedpfxjwmf Tvo Ac Neu for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Cpodpfx Acswiwpuo Nou

Condition: good (used), total height: 3,200 mm, total length: 3,500 mm, total width: 1,500 mm, overall weight: 10,000 kg, - Bear weight: 300 kg Cjdpfx Aewin Stoc Nopu - Beat frequency: approx. 120 beats per minute

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Number of ram strokes, 1/min: 48 Ram stroke, mm: 500 Cpodpfswbginjx Ac Neu Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Weight of the machine, kg: 27'000

Condition: like new (used), Year of construction: 2018, functionality: fully functional, overall weight: 8,000 kg, SPECIFICATION MODEL CBF-103L(2018) NO.OF FORGING STATION 3 PORGING LOAD(KG) 8000 MAX.CUT-OFF DIA.(MM) Ø12 Cedpfjv Iakmjx Ac Nepu MAX.CUT-OFF LENGTH(MM) 192 MAX.OUT.PUT.(PCS/MIN) 140 P.K.O. STROKE(MM) 15 K.O. STROKE(MM) 162 MAIN ENGINE (HP) 30 CUT-OFF DIE DIA.(MM) Ø45*59L PUNDH DIA.(MM) Ø53*200L MAIN DIE DIA.(MM) Ø75*200L MACHINE WT.(KG) 19000 NORMAL SIZE OF BOLT(MM) 6-10 SHANK LENGTH OF BLANK(MM) 30-152

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm Cpsdpovzxpbefx Ac Nou steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW Cpedpfx Aovuulloc Neu weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Csdpfx Aovbcxtjc Nopu Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts Cedpfx Asuhb T Djc Njpu

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 Cpedpfx Asuhb Twsc Nju - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo Codpfxjuhb Tqj Ac Nopu

Condition: used, TECHNICAL DETAILS Cpsdpsuhb Tkefx Ac Nju - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: good (used), Year of construction: 1973, functionality: fully functional, total height: 3,760 mm, pressing force: 1,250 t, total length: 6,400 mm, total width: 4,365 mm, table length: 820 mm, operating pressure: 7 bar, table width: 260 mm, throat depth: 700 mm, overall weight: 135,000 kg, pressure: 7 bar, stroke length: 220 mm, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Cpedpfx Aceuby N De Nsu Total weight, circa: 135 000 kg.

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Cpodpfx Aoubb Stec Nou Throat: 375 mm Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min Cpodort Uc Espfx Ac Neu max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: used, Year of construction: 1999, ram hammer weight 26 kg Cedpfeqwpxbjx Ac Njpu ram hammer stroke 200 mm type KO 596 no. of strokes 220 Hub/min air hammer

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? Cedpfx Acsdxvfpo Njpu :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?