BIAŁCZYK Sp z o.o.
BIAŁCZYK Sp z o.o. from Wrocław :
ing. Marcin Białczyk
Mr Marcin Białczyk
Strzegomska 55C
53-611 Wrocław
Poland
Current offers from similar dealers
Listing

18,780 km
CNC machining center
HolzfraeseHP 1890
HolzfraeseHP 1890
Call
Condition: used, Year of construction: 2019, Used machine
Year of manufacture 2019
only 110 operating hours!
Equipment and technical data:
X = 1800 mm
Y = 900 mm
Z = 80 mm
in 18 mm Koskisen panels consisting of a milling table
(X-axis), a portal (Y-axis) and a Z-axis.
Golhcdjwka T Eewxjit
Milling bed in 19 mm MDF as a sacrificial plate with guide rails and slotted nuts, as a clamping method.
Base frame with struts, cast with polymer concrete, prepared for transport by pallet truck or forklift.
Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes.
Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets.
Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet connection.
Leadshine power amplifier for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as a switching power supply with 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wire cables, wire end ferrules, control cable, shrink tubing and cable lugs.
Fully installed in an aluminum housing including electrical kit and emergency stop.
21.5 inch monitor as a built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic desk.
Tool length sensor for determining the length and changing the active zero point offset.
Special equipment:
High frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set.
PC with 8 GB RAM and AMD processor
CAD software Rhino 5.0 for creating both simple 2D data and 3D solid bodies
Location: Switzerland
Availability: Short term
Listing

18,491 km
CNC machining center with plate storage
Holz-HerDynestic 7532 10.5 automatic mit Store-Master Fl?
Holz-HerDynestic 7532 10.5 automatic mit Store-Master Fl?
Call
Condition: used, Year of construction: 2019, Used machine
Year of manufacture 2019
Basic machine - DYNESTIC 7532-10.5 Automatic
Dynestic table
For classic nesting processing with wear plate
Processing length 3100 mm
Machine frame in welded construction
with ground and hardened prism guides for the traveling column,
aggregate head and consoles
Traveling column in gantry design
Rack and pinion drive, helical gears, in X and Y directions,
Ball screw spindles in Z direction for precise positioning
Technical data:
Processing dimensions:
Max. support surface on nesting table:
X = 3100 mm Y = 1560 mm
Max. travel distances
X = 4695 mm
Y = 2100mm
Z = 293 mm
Max. drive-over height DYNESTIC table
Z = 100 mm
from top edge of table (without wear plate)
Maximum programmable speed
Vector speed: 128.0 m/min
X = 80 m/min, Y = 100 m/min, Z = 25 m/min
DYNESTIC table
Fixed, continuous machining table with grid division,
continuous grooves in X and Y direction,
spacing of the grooves 50 mm
with 25 meters of sealing cord for clamping the wear plate
Vacuum field
1-circuit vacuum system
Drilling unit 7877, 19 spindles
Drive power 1.7 kW
13 vertical spindles can be called up individually
Arrangement in U-shape
5+4 in X and 4 in Y direction
32 mm grid
Max. drill diameter: 35 mm
Total drill length: 70 mm from screw end (depending on plate thickness)
Spindle extension stroke: 70 mm
Direction of rotation: clockwise / anti-clockwise in Change
n(max.) 1000 - 4400 min-1 continuously adjustable
Mounting: M 10 thread - 11 mm fit
without tools, without mounting
6 horizontal spindles
2 double drilling spindles in X direction
1 double drilling spindle in Y direction
Mounting: M 10 thread, 11 mm fit
Total drill length max. 63 mm from screw end
without tools, without mounting
Milling unit 7842,
Power: 12.0 kW (S6)
Gslhcdowka Upswxeit
n(max.) = 1000 - 24000 min-1 continuously adjustable,
max. power at 12000 min-1 to 24000 min-1
air-cooled
with HSK-F 63 tool holder
with right-hand threaded nut (for right-hand rotating tools)
with collet chuck with HSK shaft
Ceramic ball bearing (hybrid bearing)
Tool weight max. 6 kg (incl. holder)
Tools: milling and grinding tools max. Ø 160 mm
Safety paneling in accordance with CE standard
Safety fence on the side and rear
Vacuum pump 500 m³/h dry runner
Personal safety through light barriers
in the front area of the machine
Handheld control unit for remote control of the machine
with the following operating functions:
> Start / stop of the machining program
> Speed control of the machining cycles
> Reset button
> Manual feed / rapid traverse for all axes
> EMERGENCY STOP
CAMPUS V7 CAD/CAM software 1x machine license
Consisting of:
1. CAMPUS NC-HOPS
2. CAMPUS MT-Manager
3. CAMPUS Workcenter
4. CAMPUS DXF interface
CAMPUS NC-HOPS
Graphical variant system with WOP and CAD/CAM properties for creating
part variants with macro technology
Automatic central lubrication
Automatic lubrication according to defined lubrication intervals
Additional sealing against dust through overpressure in each guide carriage
Simultaneous lubrication
for all linear guides in X, Y and Z directions,
for all ball screws in Y and Z directions
for all milling spindle guides
Listing

18,491 km
CNC machining center
Holz-HerDynestic 7532 10.5 automatic
Holz-HerDynestic 7532 10.5 automatic
Call
Condition: used, Year of construction: 2019, Used machine
Year of manufacture 2019
Basic machine - DYNESTIC 7532-10.5 Automatic
Dynestic table
For classic nesting processing with wear plate
Processing length 3100 mm
Machine frame in welded construction
with ground and hardened prism guides for the traveling column,
aggregate head and consoles
Traveling column in gantry design
Rack and pinion drive, helical gears, in X and Y directions,
Ball screw spindles in Z direction for precise positioning
Technical data:
Processing dimensions:
Max. support surface on nesting table:
X = 3100 mm Y = 1560 mm
Max. travel distances
X = 4695 mm
Y = 2100mm
Z = 293 mm
Max. drive-over height DYNESTIC table
Z = 100 mm
from top edge of table (without wear plate)
Maximum programmable speed
Vector speed: 128.0 m/min
X = 80 m/min, Y = 100 m/min, Z = 25 m/min
DYNESTIC table
Fixed, continuous machining table with grid division,
continuous grooves in X and Y direction,
spacing of the grooves 50 mm
with 25 meters of sealing cord for clamping the wear plate
Vacuum field
1-circuit vacuum system
Drilling unit 7877, 19 spindles
Drive power 1.7 kW
13 vertical spindles can be called up individually
Arrangement in U-shape
5+4 in X and 4 in Y direction
32 mm grid
Max. drill diameter: 35 mm
Total drill length: 70 mm from screw end (depending on plate thickness)
Spindle extension stroke: 70 mm
Direction of rotation: clockwise / anti-clockwise in Change
n(max.) 1000 - 4400 min-1 continuously adjustable
Mounting: M 10 thread - 11 mm fit
without tools, without mounting
Gelowkbbdehcdwxsit
6 horizontal spindles
2 double drilling spindles in X direction
1 double drilling spindle in Y direction
Mounting: M 10 thread, 11 mm fit
Total drill length max. 63 mm from screw end
without tools, without mounting
Milling unit 7842,
Power: 12.0 kW (S6)
n(max.) = 1000 - 24000 min-1 continuously adjustable,
max. power at 12000 min-1 to 24000 min-1
air-cooled
with HSK-F 63 tool holder
with right-hand threaded nut (for right-hand rotating tools)
with collet chuck with HSK shaft
Ceramic ball bearing (hybrid bearing)
Tool weight max. 6 kg (incl. holder)
Tools: milling and grinding tools max. Ø 160 mm
Safety paneling in accordance with CE standard
Safety fence on the side and rear
Vacuum pump 500 m³/h dry runner
Personal safety through light barriers
in the front area of the machine
Handheld control unit for remote control of the machine
with the following operating functions:
> Start / stop of the machining program
> Speed control of the machining cycles
> Reset button
> Manual feed / rapid traverse for all axes
> EMERGENCY STOP
CAMPUS V7 CAD/CAM software 1x machine license
Consisting of:
1. CAMPUS NC-HOPS
2. CAMPUS MT-Manager
3. CAMPUS Workcenter
4. CAMPUS DXF interface
CAMPUS NC-HOPS
Graphical variant system with WOP and CAD/CAM properties for creating
part variants with macro technology
Automatic central lubrication
Automatic lubrication according to defined lubrication intervals
Additional sealing against dust through overpressure in each guide carriage
Simultaneous lubrication
for all linear guides in X, Y and Z directions,
for all ball screws in Y and Z directions
for all milling spindles
Listing

18,384 km
CNC Woodworking Machines
SCM-MobidelliAuthor 636 S
SCM-MobidelliAuthor 636 S
Call
Condition: ready for operation (used), Year of construction: 2008, A Morbidelli CNC machining center with drilling and milling functions is available. Working area X/Y/Z: 4255mm/1465mm/280mm, traverse path X/Y/Z: 3600mm/1300mm/280mm, traverse speed X/Y: 40m/min/45m/min, table dimensions X/Y: 3600mm/1300mm, spindle power: 11kW, speed: 18000rpm, tool holder: HSK 63, tool positions: 12, drilling spindles horizontal/vertical: 6/12, machine dimensions X/Y/Z: 4000mm/1700mm/2500mm, weight: 4000kg. Documentation available. On-site inspection is possible.
Gelhcowi Tngodwxjit
Listing

19,201 km
MACHINING CENTER
MANDELLI CNC 840DSTORM 1900
MANDELLI CNC 840DSTORM 1900
Call
Condition: good (used), Year of construction: 2007, MANDELLI STORM 1900 MACHINING CENTER from 2007
cnc Siemens 840 D
X 2100
Y 1500
Z 1800
FAST 28M/min
maxi diameter workpiece 1900mm
maximum height 1750mm
spindle BT 50 - 6000rpm
2 pallets 1000 x 1250
Gislowi Igqshcdwxst
ATC 200 position.
Auction
Ends in
d
h
min
s
Auction ended

19,606 km
Machining center
BIESSEA3.4 FT
BIESSEA3.4 FT
Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 3,685 mm, travel distance Y-axis: 1,290 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS
Working area: 3,685 x 1,290 x 150 mm
Milling machine: 1 electric spindle
Milling machine power: 16 HP
Spindle mount: HSK-F63
Tool changer: 1 automatic rotary gearbox with 18 positions
Drilling head: 14 vertical and 6 horizontal holes
Gjlowixh Sshcdwxjit
Lubrication: Automatic central lubrication system
Vacuum pump: 1 unit, 250 m³/h
Software: BIESSE WORKS
Standards: CE standard
Listing

18,161 km
Machining center
BUSELLATOOptima C21
BUSELLATOOptima C21
Call
Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, - Working dimensions: 3050 x 1250 mm
- Main spindle: 11/13 kW (S1/S6)
- C-axis
- Drills: 8 x V, 2 + 2 H
- Grooving saw
- Tool magazine: 10 slots
Gislhewiuz Uocdwxst
Listing

18,214 km
Nesting machine
SCMMORBIDELLI X200 - 2231
SCMMORBIDELLI X200 - 2231
Call
Condition: used, Year of construction: 2023, Working dimension X: 3.117 mm
Working dimension Y: 2.177 mm
Working dimension Z: 150 mm
Number of milling spindles: 1
Blow-off device: Yes
Main motor power: 14 kW
Rotation speed max: 24.000 rpm
Torque support: Yes
4th axis: C-axis
Tool clamping system: HSK-F63
Tool changer positions: 18
SCM Tool changer FAST 18: Yes
Vertical drilling spindles: 12
SCM Drilling aggregate F 20 LL: Yes
Horizontal drilling spindles in X: 4
Horizontal drilling spindles in Y: 4
Groove saw: in Y-direction, in X-direction
Gantry machine: beidseitig angetriebene Gantrymaschine
Machine table: Matrix table
Multi-zone vacuum: Yes
Positioning aid: Yes
Point-type laser: Yes
Vacuum pump: Yes
Number of vacuum pumps: 2
Capacity vacuum pump: 500 m³/h
Suitable for nesting: Yes
Labelling: automatic
Barcode reader: Yes
Safety device: Bumper
Gjlhcdowin Rpewxsit
SCM Pro-Space: Yes
Interface for .dxf data: Yes
SCM TecPad: Yes
Workpiece length measurement: Yes
Werkstückdickenmessung: Yes
Unloading unit: Yes
Automatic central lubrication: Yes
Control cabinet cooling: Yes
Control: SCM eye-M PRO
Listing

18,589 km
Machining center
BIESSERover A3.40 FT NBC 412 Aut. nesting cell
BIESSERover A3.40 FT NBC 412 Aut. nesting cell
Call
Condition: used, Year of construction: 2008, Biesse NBC 412 412 Automated cell for nestig complete with loading and unloading system & Rover A 3.40 FT
Description:
Rover A 3.40 FT
Centralized automatic lubrication system
8 front stops + 8 back stops with sensors
1 Rh side stop with sensor
Vacuum system for 2 300 m3/h pumps
12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled
Blowing unit
Boring head BH 18 A
Gislhcdjwh Sfzswxst
Revolver tool changer with 10 positions
Numerical Control XP600
BiesseWorks - Advanced - machine and office version
BIESSE NEST Module
Arm for pieces loading and unloading, positioned on the machine beam
Loading and unloading table, positioned on the LH side of the machining center
CE Safety devices
2 m3/h rotary claw vacuum pump
Mechanical presser ring with pneumatic lowering , for nesting based application
(All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!)
(Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!)
Best woodworkingmachines from the Netherlands Holland
Die besten holzbearbeitungsmaschinen aus die Niederlande
De beste gebruikte machines uit Nederland
Listing

17,439 km
Long bed CNC Lathe DANIBRUM S2440 CNC
DANIBRUMS2440 CNC
DANIBRUMS2440 CNC
Call
Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, spindle speed (max.): 18,000 rpm, Long-Bed CNC Lathe – High-Precision Cylindrical Carving
The CNC lathe with numerical control is the ideal solution for machining cylindrical wooden parts, offering an excellent blend of automation, precision, and efficiency. This high-performance machine compensates for the lack of skilled labor, ensuring perfect repeatability and maintaining the same dimensions and quality for every part produced.
Perfect for long and detailed processing
With a working length of up to 2400 mm, the lathe allows for the creation of elements such as balusters, columns, table legs, decorative pieces, or church furniture components – all carved from a single piece, with no joints. Its robust design and welded frame made of thermally treated rectangular profiles ensure long-term stability and precision.
High-quality components for consistent performance
Professional linear guides (HIWIN) on X, Y, and Z axes: smooth, vibration-free movement
Hybrid servo motors: precise control of speed and positioning
Rack-and-pinion drive: efficient and accurate axis movement
Water-cooled motors: operate up to 18,000 rpm without overheating
Self-centering chucks and adjustable tailstock with cylindrical guides: secure grip for various part sizes
Smart control and simplified operation
The DSP system with internal memory allows fast file import via USB and automatic project resume after interruptions. It includes advanced calibration functions, zero-point setting, and speed adjustments, offering full production flexibility.
Built for durability and energy efficiency
Optical sensors: maintain accurate axis positioning
Automatic lubrication pump: easy maintenance and extended machine life
Low energy consumption: meets modern energy efficiency standards
Key Benefits
Gijlhcowh Sc Hedwxst
✔ High accuracy and repeatability
✔ Long-part machining with no joints
✔ High efficiency, reduced costs
✔ Versatile for furniture, decorative, and specialty part production
The long-bed CNC lathe is the ideal choice for workshops and factories seeking top-tier performance, versatility, and consistent quality in wood processing.
Maximum Working Length
2400 mm
Maximum Working Diameter (Ø)
400 mm
Number of Working Units
1
Control System
DSP
Workpiece Rotation Speed
0–2500 rpm
Spindle Motor Power
4.5 kW
Spindle Speed
18,000 rpm
Inverter
“BEST” inverter
Drive Motors
Hybrid Servo Motors
Maximum Feed Rate
50 mm/s
Precision
0.0125 mm
Power Supply
400 V – 3 Phase – 50 Hz
Technical Support Available In
Romanian, English, German
Listing

18,214 km
CNC machining centre
Format4PROFIT H 08 16.31
Format4PROFIT H 08 16.31
Call
Condition: used, Year of construction: 2015, Working dimension X: 3.090 mm
Working dimension Y: 1.530 mm
Working dimension Z: 85 mm
Number of milling spindles: 1
Main motor power: 10 kW
Rotation speed max: 24.000 rpm
Tool clamping system: HSK-F63
Tool changer positions: 11
Gslhcdswh Rnuswxoit
Linear tool changer: Yes
Vertical drilling spindles: 8
Gantry machine: beidseitig angetriebene Gantrymaschine
Automatic central lubrication: Yes
Machine table: Matrix table
Tool charge measurement: Yes
Vacuum pump: Yes
Number of vacuum pumps: 2
Capacity vacuum pump: 500 m³/h
Safety device: Light barrier
Control: PC control
Handheld terminal: Yes
Software: FORMAT 4 WOOD FLASH
Conformity marking: CE mark
Total connection: 25 kW
Listing

17,696 km
CNC routers
Reichenbacher GmbHArtisX4 Sprint
Reichenbacher GmbHArtisX4 Sprint
Call
Condition: used, Year of construction: 2005, operating hours: 5,555 h, Functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Bosh Rexroth, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, table width: 1,300 mm, table length: 4,000 mm, rotational speed (min.): 1,200 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,500 kg, spindle motor power: 10,000 W, spindle nose: HSK63F, number of spindles: 1, number of slots in tool magazine: 15, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION.
1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F.
Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360°
Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min
Gateway: 290 mm
1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg
L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm
Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm).
Gijlhcewh Aidodwxst
Tool set: yes (including some never used)
Table division into two stations for alternating work
1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l
Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.)
Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card
Profibus SERCOS drive control system
Data input: USB-Stick, local network
Operating system: Windows2000. ProEmbSys
Touch screen
CAD/CAM software: Alpha/CAM
Movable control panel with manual control panel
Remote diagnostics
Interpolation: 5 linear, 2 ½ D circular
Connected power: approx. 25 kVA
Central lubrication
Weight: 5.5 t
Machine in very good condition, 100% efficient.
Storage location: northern Poland
Listing

17,688 km
Machining center
SERON5 Axis ProG+
SERON5 Axis ProG+
Call
Condition: new, Year of construction: 2025, Technical data
Control system multi-axis real-time interpolator, with active prediction
of trajectories, LAN communication, EtherCat, sampling time less than 1 ms,
RTCP, remote service access
Working area X: 2000-4700 mm; Y: 3000-30000 mm
Z axis clearance up to 3000 mm
Drive system servo drives with EtherCat protocol, X, Y, Z helical strips
hardened ground in accuracy class 6
Linear bearing trapezoidal rails, Y axis quadruple guide size 35,
X and Z axis triple guide size 35
Travel speed X, Y up to 25 m/min; C, A up to 6000 degrees/min
Gelhcdewhxcgowxsit
Program resolution 0.0005 mm
Positioning accuracy 0.01 mm
Gate drive double-sided master/slave with gate angle correction
Electrospindles up to 50 kW
Electrospindle inverter yes
Maximum electrospindle speed 24000 rpm (option 6 000 – 40 000)
Welded, stress-relieved, precisely machined steel gantry
Table type T-shaped modular (steel, aluminum) separated from the main structure
Possible additional options
3D printing head
tool cooling
linear tool magazine or mobile linear turret chain
cutting saws
laser scanner
radio measuring probe
processing zone separators
correction map
roller roof
vacuum table
extraction foot adapted to 5-axis heads
specialized CAD/CAM software
3D printers for granulate can handle a variety of plastics, such as PLA, ABS, PETG, polyamides or polypropylene.
#plotter #CNC #milling machine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint
#MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminium #aluminum
#brass #stainless steel #cast iron #polypropylene #polycarbonate #acrylic #fermacell
Listing

18,539 km
CNC machining center
HOMAGCENTATEQ P-110 Venture BMG110/31/F/R
HOMAGCENTATEQ P-110 Venture BMG110/31/F/R
Call
Condition: used, Year of construction: 2020, No. 3219
CNC machining center HOMAG CENTATEQ P-110 Venture BMG110/31/F/R
Used, year of construction 2020
CNC-controlled processing center in moving gantry design, for milling and drilling workpieces made of wood or wood-like materials
Travel speeds: X/Y-axis 60 m/min / X-axis 35 m/min / Y-axis 50 m/min / Z-axis 15 m/min
- Program-controlled suction hood
- Max. workpiece length, all units: single loading 3100 mm / pendulum loading 1025 mm
- Max. workpiece length, tool diameter 25 mm: single loading 3275 mm / pendulum loading 1025 mm
- Max. workpiece width, front stop: All units 1250 mm / milling tool diameter 25 mm 1250 mm
- Maximum workpiece width, rear stop: All units 1230 mm / milling tool diameter 25 mm 1405 mm
- Workpiece thickness: Max. 260 mm including clamping device
- Operating voltage 400 Volt, 50 Hz
- EC conformity (CE)
- BUMPER safety technology with pressure-sensitive switching buffers in accordance with EN1760-3
- Drilling gear V12/32MM High Speed 7500, 1500 - 7500 rpm frequency-controlled, 2.3 kW
- Grooving saw 0°/90° tiltable, 1500 - 7500 rpm frequency-controlled
- H4X drilling unit, 1500 - 7500 rpm frequency-controlled
- Drilling unit H2Y, 1500 - 7500 rpm frequency-controlled
- Processing spindle 12 kW DRIVE5CS, frequency converter for electronic speed control from 1500 - 24000 rpm, 12 kW for S6 operation, 9 kW for S1 operation
- Unit carrier for two Z-axes
- Tool changer magazine 8 places at the rear
- Linear tool changer fixed on the side 10 places
- Tool length control
- Tool holder saw DRIVE5CS
- Fine-cutting saw blade diameter 350 mm
- Basic structure raster table /31
- Raster table top
- Lateral and longitudinal stop pins 140 mm
- Two-part vacuum system for pendulum operation
- Vacuum connection for templates
- Supply unit for pneumatic clamping elements, right and left working field
- Laser positioning aid
- Vacuum clamp for grid table 140 x 130 x 45 mm LBH
- Multi-clamp for R-table 10 - 100 mm
- 10 m sealing cord diameter 8 mm for grid table
- Vacuum system 290 / 345 m3/h
- Energy saving function
- POWERCONTROL with POWERTOUCH
- PC keyboard: German
- USB hard disk for image
- Mobile operating terminal (10 m)
- Permanently mounted control cabinet
- TAPIO READY
- Network connection Ethernet CNC
- Manual operation wired for run-in operation
- Comfort package operation
- woodWOP for machine
- woodWOP DXF-Import Basic (single user license)
- Record and evaluate machine data - MMR
- woodWOP Office Professional (single user license)
- Language selection German
- Documentation on data carrier
- Documentation on paper
- INTELLISERVICENET
Sale on behalf of the customer, ex location near 73479 Ellwangen, without dismantling, transportation and assembly
Disassembly, loading and transportation by us optionally possible
Subject to errors in the description and price
To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment
Gslswhwqvjhcdwxeit
Sold as is
Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery
Terms of payment: Prices excl. VAT, payment before collection or dispatch
Terms of delivery: ex location
Listing

18,464 km
CNC machining center
Holz-HerDynestic 7535 10.5 Lift
Holz-HerDynestic 7535 10.5 Lift
Call
Condition: used, Year of construction: 2022, Used machine
Year of manufacture 2022
Condition: like new
Equipment and technical specifications:
Holz-Her DYNESTIC 7535 10.5 Lift machining center
Processing length 3100 mm
Machine frame in welded construction
with ground and hardened prism guides for the traveling column,
unit head, and consoles
Gantry-style traveling column
Rack and pinion drive, helical gears, in the X and Y directions
1 ball screw in the Z direction for precise positioning
MATRIX table
Fixed, continuous machining table with grid divisions, continuous
slots in the X and Y directions, 50 mm slot spacing with 25 meters of sealing cord for clamping the wear plate
1 machining area with stop bars / stop
Height 30 mm, pneumatically lowerable. Two stop bars each in the Y direction and one stop in the X direction on the right (viewed from the front edge of the machine).
Remote maintenance:
Integrated network card for transferring control and program data. Data is transferred via a high-speed internet connection.
Requirement: High-speed internet connection on the machine.
USB port
for data backup or for directly loading machining programs on the control panel.
Giolewhukgehcdwxet
TECHNICAL DATA:
Machining dimensions 7535 10.5:
Max. support surface on nesting table:
X = 3100 mm Y = 1560 mm
Max. travel distances:
X = 4695 mm Y = 2305 mm Z = 565 mm
Max. machining height 7535/7735 Classic without pusher
Z = 300 mm from table top edge (without wear plate)
Max. overtravel height of the pusher over the table of the Push/Auto/Lift versions:
Z = 250 mm from table top edge (without wear plate)
Maximum programmable speed
Vector speed: 128.0 m/min
X = 80 m/min, Y = 100 m/min, Z = 25 m/min
MACHINE OPERATION:
SOFTWARE
CAMPUS V7 Plus CAD/CAM Software 1 license including material removal simulation
1 pc. Software license secured via license plug for the machine
CAMPUS V7 PLUS, software for CNC machining centers
Consists of:
1. CAMPUS NC-HOPS
2. CAMPUS aCADemy
3. CAMPUS MT-Manager
4. CAMPUS Workcenter
V7 PLUS =
5. CAMPUS 3D material removal simulation BetterSim
CAMPUS NC-HOPS
Graphical variant system with WOP and CAD/CAM features for
creating part variants using macro technology
CONTROL
Incl. ECO MODE - time-controlled shutdown of drive and control components to save energy
Windows-based industrial PC controller
Intel Core i5-6600
8 GB RAM
256 GB M.2 (NVMe SSD)
24V DC industrial standard
Electronic stop monitoring for all selected stop bars or stop bolts on the machine.
Safety device to prevent damage to the stops.
Handheld control unit for remote control of the machine (13 m)
with the following operating functions:
> Start/stop of the machining program
> Speed control of the machining cycles
> Reset button
> Manual feed/rapid traverse for all axes
> Emergency stop
Control panel with 21.5" 16:9 touchscreen
Capacitive multi-touch screen for intuitive operation
- Continuous glass surface
- Includes wireless
Listing

18,384 km
CNC Woodworking Machines
CMSAvant
CMSAvant
Call
Condition: ready for operation (used), Year of construction: 1999, A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.
Gijlswhfmrshcdwxjt
Listing

18,214 km
Nesting machine
SCMMORBIDELLI X200 - 2231
SCMMORBIDELLI X200 - 2231
Call
Condition: used, Year of construction: 2022, Working dimension X: 3.117 mm
Working dimension Y: 2.177 mm
Working dimension Z: 150 mm
Number of milling spindles: 1
Blow-off device: Yes
Gislhcdwowhfcajxot
Main motor power: 14 kW
Rotation speed max: 24.000 rpm
Tool clamping system: HSK-F63
Tool changer positions: 18
SCM Tool changer FAST 18: Yes
Tool changing auxiliary device: Yes
Vertical drilling spindles: 13
Horizontal drilling spindles in X: 6
Horizontal drilling spindles in Y: 4
Groove saw: in X-direction, 90° turnable
SCM Drilling aggregate F 23 LR: Yes
SCM : Yes
Gantry machine: beidseitig angetriebene Gantrymaschine
Machine table: Matrix table
SCM Machine table HE Multi function table: Yes
Multi-zone vacuum: Yes
Dynamic vacuum: Yes
Anzahl Vakuumzonen: 8
Vacuum pump: Yes
Number of vacuum pumps: 2
Capacity vacuum pump: 500 m³/h
Suitable for nesting: Yes
Feeding: Vakuum-Einzugsvorrichtung, Panel storage system
Outfeed: discharge unit
Safety device: Bumper, Light barrier
SCM Pro-Speed: Yes
Interface for .dxf data: Yes
SCM TecPad: Yes
Automatic central lubrication: Yes
Tool charge measurement: Yes
SCM S-N-D three-position selector switch: Yes
Control: SCM eye-M PRO
Control cabinet cooling: Yes
Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MSL, SCM NESTING FREE-FORM, MICROSOFT WINDOWS 10
Conformity marking: CE mark
Listing

18,562 km
CNC machining center
GannomatProtec 571
GannomatProtec 571
Call
Condition: used, Year of manufacture: 2014, Motor voltage: 3x 400 V, Motor frequency: 50 Hz, Basic machine with milling unit, Profit HSK63F, Extractor distributor with 2 outlets, Roller table 765 mm (Y-axis), Roller table 765 mm (Y-axis), Auxiliary stop 600 mm, Drill set for Protec, HW groove cutter 125/30 mm, DIA cutter for HSK63F milling units, Tool holder HSK63F, Collet 462E/OZ25 for shank 25 mm, HSK assembly set, Counter pressure device from above
Giolhcdswhb T Uewxst
Listing

17,439 km
CNC machining center
DANIBRUM2130 ATC Master DRILL Nest
DANIBRUM2130 ATC Master DRILL Nest
Call
Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 2,100 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 300 mm, High-performance CNC router – the complete solution for wood and composite materials processing
The CNC router 2130 ATC Master Drill NEST is designed for efficient processing of solid wood doors, furniture fronts made of chipboard, MDF or other similar materials. Equipped with a powerful 9 kW air-cooled motor, it allows for high-quality finishes and cutting at speeds of over 18 m/min.
Solid and durable construction
The 10 mm steel base provides stability, and the HIWIN industrial sliding system with 30 mm rails and recirculating balls ensures precision and speed in any working position. The clamping of the parts is carried out by vacuum, and the centralized lubrication system reduces wear and maintenance.
Automatic performance and high productivity
The automatic loading and unloading table, together with the adjustable 3-piston loading device and the material pushing system, optimizes work cycles. Optical sensors automatically detect the presence of plates, reducing errors and downtime.
Advanced precision and versatility
The drive system on the X and Y axes with bevel gear and rack, and on the Z axis with ball screw, guarantees smooth movements and total control. The linear tool magazine with 8 or 12 positions, pneumatically operated, allows for quick cutter changes, increasing process efficiency.
Intelligent control and compatibility
The NC Studio control unit is easy to use and compatible with most CAD/CAM software. Precise spindle adjustments and automatic tool measurement contribute to accurate machining, even in continuous mode.
Essential Auxiliary Equipment
Multi-operation Drilling Unit
Impact and vibration resistant polyamide table
Double piston reference limiters
Efficient exhaust hood
Strategically placed emergency buttons
Key Benefits:
Fast and quality machining with minimal personnel
Low maintenance and extended service life
Fully automated system for maximum efficiency
This CNC router is part of the ATC Drill NEST series and is ideal for modern workshops looking for speed, precision and automation in the production of furniture, doors or decorative panels. Available in the 2128 ATC Drill NEST, 2140 ATC Drill NEST, 2145 ATC Drill NEST variants. Flexibility in configuration gives you full control over the machine model required for your business.
Manufacturer
DANIBRUM – Romania
Working surface X - Y
2100 x 3000 mm
Height stroke
300 mm
Milling motor power
9 kW
Gislhcdjwhbppjwxst
Maximum working speed
24000 rpm
Motor cooling mode
Air
Converter
yes
Hiwin linear guide
30 mm
Height adjustment - Z axis
TBI 2502 ball screw
Basic system with controller
NC STUDIO
Supply voltage
400 V – 3 Phase – 50 HZ
Technical support available in Romanian, English, German.
Listing

18,567 km
CNC Horizontal Machine center SCM Morbidelli N100 2020
SCMMorbidelli N100 Morbidelli
SCMMorbidelli N100 Morbidelli
Call
Condition: used, Year of construction: 2020, Price: On request
CNC machining centre SCM Morbidelli N100 12 A
Brand SCM
Type Morbidelli N100 12 A
Year of construction 2020
Serial number AM00002846
Machining table dimensions 2486x1255 mm (LxW)
Groove pattern 40 mm distance
Distance between holes vacuum cups 120 mm
Equipped with 3 reference gauges
Table has 1 vacuum field
Table working range
X axis 2486 mm
Y axis 1255 mm
Z-axis 150 mm
Stroke of the units
X axis 3120 mm
Y axis 1685 mm
Z axis 250 mm
Movement of the axes
Maximum vectorial speed in rapid traverse XY axis 35 m/min
Stroke of Z axis 250 mm
Panel pass 150 mm
Hiteco milling unit
Motor power 5.5 kW (7.5 HP)
Tool holder HSK-63-F
Milling spindle speed 1500-24000 rpm
Tool changer 8 positions
Central exhaust connection 250 mm
Gielhswgxdnecdwxet
Control unit
Windows EmbeddedStandard 7 64 bit
21.5 LCD touch screen
XILOG-MAESTRO software package
Including vacuum pump
Capacity 250 m3/h
Power 5.5 kW
Max. vacuum 0.9 bar
Noise level 81 db (A)
Total dimensions 5000x3000x2500 (LxWxH)
Total weight 2500 KG
Machine available from 04-205
Machine is still operational, viewing possible by appointment.
- Year: 2020
- Documentation available: Yes
- CE mark available: Yes
- Serial number: AM00002846
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Glenn Smeets
Listing

18,384 km
CNC Woodworking Center
Hamuel ReichenbacherVision III-TT-L-5-Achs
Hamuel ReichenbacherVision III-TT-L-5-Achs
Call
Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total number of vacuum pump pins: 72, vacuum pump pin stroke: 100mm, vacuum pump pin useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 14500mm/7800mm, control: Siemens Sinumerik 840D sl, NCU 720.3b, spindle hours: approx. 23899h. Documentation available. On-site inspection is possible.
Gielhcdswgngxjwxjt
Auction
Ends in
d
h
min
s
Auction ended

18,729 km
CNC machining center for wood
MTCHMT-FR 3020
MTCHMT-FR 3020
Condition: new, Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS
Travel X / Y / Z: 3,000 / 2,000 / 200 mm
Accuracy: 0.01 mm
Spindle
Spindle power: 3.0 kW
Gslhcdwewgbtlexjit
Spindle speed: 0 - 18,000 rpm, variable
Spindle diameter: 3.175 - 12.7 mm
Spindle cooling: air
Working area and equipment
Maximum material height: 120 mm
Work table size: 3,000 x 2,000 mm
Extraction table: 5.5 kW double stage, divisible into 6 zones
Felt carpet thickness: 4.5 mm
Plotter equipment
1st head: 380V 5.5 kW water-cooled electric spindle
2nd head: Electric oscillating knife
3rd head: Rolling tool
EQUIPMENT
- PC Includes machine control software and Ethernet interface
- Supported file formats: vector formats, DXF, G-code
- Camera for detecting print marks
- Extractor with dual filter and 3.0 kW motor
- Extraction tube and collector for the spindle
Listing

18,803 km
Homag BOF 612/34/34/2R
HomagBOF 612/34/34/2R
HomagBOF 612/34/34/2R
Call
Condition: used, CNC work center with double Nesting work surface Numerical Control with WooWop software Working range on X axis mm 3400 Working range on Y axis mm 3400 (mm 1700 x 2) No. 2 working fields on aluminum tables Nesting - the machine works with single planes or with both simultaneous work planes No. 2 work planes with full nesting plane Multi-zone vacuum system No. 2 vertical electrospindles 4 axes with liquid cooling No. 2 Automatic tool change system with chain with no. 24 positions, HSK-F63 cones No. 2 Automatic tool change system with no. 10 positions on the electrospindle, HSK-F63 cones Vacuum pump mc/h 250 Automatic lubrication system Front protection and safety system with mats TECHNICAL DETAILS TO BE VERIFIED
Gielhcowf Nwijdwxjt
Listing

18,567 km
CNC Horizontal Machine center Essetre Techno Wall 2165A 2017
EssetreTechno Wall 2165A Techno
EssetreTechno Wall 2165A Techno
Call
Condition: used, Year of construction: 2017, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Price: On request
The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm
5axis unit 12kw is a milling group with toolchanger
C1: 540°
B1: 250°
C2: 540°
B2: 90°
Installed dimensions: 19300x7100xH4400mm
- Main motor power [kW]: 55.0
- Number of controlled axes [pcs]: 2
- Table length [mm]: 14400
- Table width [mm]: 3500
- Year: 2017
- Documentation available: Yes
- CE mark available: Yes
- Serial number: 904B0018
- Voltage [V]: 400
Gielhcdowf Hw Hewxst
- Power [kW]: 65.0
- Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h)
- Transport packages [pcs.]: 1
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Peter Stroomberg
Listing

18,567 km
CNC Horizontal Machine center BMH ES 22 2007
BMHES 22 ES
BMHES 22 ES
Call
Condition: used, Year of construction: 2007, Price: On request
Gijlhswfph Ujcdwxst
- Year: 2007
- Documentation available: Yes
- CE mark available: Yes
- Serial number: 789
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Peter Stroomberg