Sklarz Abwasser- und Umwelttechnik GmbH

Condition: ready for operation (used), Year of construction: 1973, Deckel FP2 tool milling machine with 3-axis digital readout. The machine is in operational condition. Rigid table, SK 40 spindle taper. Accessories: various collets and milling arbors, tailstock support, vise, operating manual. Defects: one axis of the digital readout does not count, table has breakouts. Can be demonstrated under power by arrangement. Laedpfxjx Nclho Affsk

Condition: excellent (used), DECKEL FP 2 Tool Milling Machine from Educational Facility -Well-maintained original condition -Traverse paths X/ Y/ Z: 400x200x400mm -3-Axis digital readout (NEW) -Swiveling table – Clamping surface 700x350mm -Spindle speed range: 40 – 2000 RPM -Automatic feeds / rapid traverse in all three axes -Tool holder ISO 40 -Vertical / horizontal milling attachment -Swiveling vertical head with quill -Coolant system -Spindle nut X-AXIS (NEW) -Machine feet -Precision machine vise “RÖHM” -Various tool holders -Chip tray / machine base Laedpfex Hyuhox Affsk -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500Kg Errors and omissions excepted.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, Dear Sir or Madam, For sale is a Deckel FP2 milling machine. This newer model is especially notable for its stepless speed control, while still maintaining a very simple construction. Operation is extremely straightforward. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine in person. --- Currently, we have 3 units available --- Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary-tilt-swivel table Travel ranges: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Lsdpfx Afjx Hr Dzsfeak Tool holder: SK40 Draw system: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed adjustment in all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master engineering company - All machines are thoroughly inspected - All lubricants and any worn parts are replaced beforehand - On request, we can fully or partially overhaul your selected machine - On request, you can order additional accessories such as tools, etc., directly - On request, we can install additional features such as safety devices directly - We are happy to arrange shipping and/or installation for you

Condition: good (used), functionality: fully functional, X = 400 mm, Y = 300 mm Lodpfx Afox Hqufofjak Infinitely variable feed rates, Speeds stepped from 35 to 2200 rpm Spindle mount ISO 40 • Milling head with boring quill • Universal rotary and tilting table

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Lasdpfex Hkd Tsx Affjk Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: like new (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 580 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, controller model: Contour 1, NC Milling Machine Deckel FP4A We are offering for sale a perfectly maintained Deckel FP4A CNC milling machine (very low operating hours, in as-new condition)! Technical Details: - Travel (X): 580 mm - Travel (Y): 400 mm - Travel (Z): 450 mm (390 mm*) - Table size: 460 x 800 mm - Spindle speed range: 40 – 4000 rpm - Feed rate: 2 – 3600 mm/min - Rapid traverse: 4.0 m/min - Spindle taper: SK 40 - Machine dimensions (LxWxH): approx. 3.0 x 2.10 x 2.10 m - Spindle drive power: 4.0 kW Lasdpfx Afexzpwfofjk - Control: Contour 1 Description: CNC-controlled tool milling machine, equipped with Contour 2 control. Features include a vertical head rotatable +/- 90° with quill travel of 80 mm, horizontal spindle, power feeds & rapid traverse on all 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant system, safety emergency stop, chip tray, and separate electrical cabinet. The machine is in top working condition. Note: This additional information is standard for this model. Please always verify the exact configuration during inspection. The DECKEL FP4A Universal Tool Milling Machine, built in 1985, is a classic and highly versatile metalworking machine renowned for its precision and flexibility – testament to Deckel’s strong tradition of engineering quality. The FP4A features a robust bed-type construction, delivering the necessary stability for precise milling tasks. Its universal tool milling head is a highlight, enabling a wide spectrum of operations—from basic drilling to complex contouring and profiling. This versatility makes it a valuable asset in tool and die manufacturing, as well as mold making. Key technical features of the 1985 DECKEL FP4A include a generously sized worktable, infinitely variable spindle speed adjustment, and an intuitive control interface for efficient programming and machine operation. The advanced CNC technology contributes to exceptional accuracy and operator convenience. Despite its age, the DECKEL FP4A continues to be a trusted solution for applications requiring flexible tool milling. Its reputation for reliability and precision makes it an essential tool for modern metalworking and manufacturing operations. Deckel’s legacy of quality and innovation in the field of metal machining is clearly evident in this model.

Condition: good (used), Year of construction: 1979, Deckel FP2, stepless, tool milling machine. The machine is in good condition, with a fixed table and SK 40 spindle taper. Accessories include various collets and milling arbors. Good, ready-to-operate condition. Can be demonstrated under power by arrangement. Lsdjxzn Hlspfx Affsak

Condition: good (used), functionality: fully functional, machine/vehicle number: 3500072, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, mount diameter: 40 mm, table length: 800 mm, table width: 400 mm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,000 kg, INTOS FNGJ 40 universal tool milling machine - Tool holder: SK 40 - Table with 8 T-slots The machine is equipped with a three-axis HEIDENHAIN digital readout, as well as two workshop drawer cabinets matching the machine, complete with accessories and tools. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck. Laodpexx Nk Hefx Affek

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 Laodpoxv D Uzefx Affsk stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories: various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by arrangement. Laodpfsxu Uvtsx Affok

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table Ljdpjxghtvsfx Affeak >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: good (used), Tool Milling Machine / DECKEL FP 2E – from training facility - Travel paths X/Y/Z 400x200x400mm - Automatic feeds + rapid traverse on X/Z axis - Speed range 40-2000 rpm - Tool holder ISO 40 - Vertical/horizontal milling attachment - Swiveling vertical head with quill Ledpfx Afexga Tuofoak - Machine with sliding head / extended Y-axis travel - New control cabinet - Coolant system - Chip tray - Documentation Dimensions: LxWxH 1.5x1.6x1.8 meters / Weight 1500 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm 950x250 mm 65-2600 U/min Lodoxfb H Tjpfx Affeak DIN 2080 ISO 40

Condition: used, Year of construction: 2006, x-travel 560 mm y-travel 300 mm z-travel 420 mm table-size 1055 x 240 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 1550 U/min total power requirement 5,5 kW weight of the machine ca. 1,3 t dimensions 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display - Chip guard - Coolant system Lodpfxsxfb Hte Affsak - Machine light - Chip tray

Condition: used, x-travel 390 mm y-travel 200 mm z-travel 390 mm table-size 775 x 330 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 2000 U/min Lasdpsxfb Hgjfx Affsk quill stroke 40 mm total power requirement 2,2 kW weight of the machine ca. 1,4 t dimensions 1,75 x 1,5 x 1,8 m Universal Milling Machine - Digital Display - Chip Guard - Coolant System - Machine Light - Chip Tray - Machine Feet - Operating Instructions

Condition: good (used), Year of construction: 1980, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, accessories: various collets and milling arbors, counterholder. Good operational condition. Can be demonstrated under power by appointment. Lasdpfx Ajxdr Uxsffok

Condition: used, Year of construction: 1986, x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 600 x 300 mm quill stroke 50 mm spindle taper ISO 40 spindle turning speed range 50-400 , 400 - 3150 U/min CNC-control TNC 135 voltage 380 V / 50 Hz feeds X+Z = 5 -1000 mm/min rapid traverse X+Z = 2,4 m/min feeds Y = 5 -670 mm/min rapid traverse feeds Y = 1,6 m/min measuring system resolution capability 0,005 mm Ljdpjxc Nwnsfx Affsak total power requirement 3,7 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 1,8 x 1,70 m • HEIDENHAIN TNC 135 control,

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Laedpjxbx R Uefx Affek

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min quill stroke 60 mm weight of the machine ca. 1,5 t Lajdpfx Afsw Tdxiofek dimensions 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray Lsdpfew Evq Aex Affsak >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: good (used), Tool Milling Machine Stock number: 3008 Manufacturer: Deckel Machine number: 46445 Type / Model: FP 2 Travel paths x-y-z: 400 - 200 - 400 mm Table: 700 x 285 mm Speed range: 40 to 2,000 rpm Spindle taper: SK 40 Feeds: 8 to 400 mm/min Connected load: 2.2 kW Accessories/Equipment: Elesta digital readout Condition: Good Lsdpfx Aswy Dl Doffoak Weight: 1.2 t Dimensions: 1,000 x 1,200 x 1,800 mm

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Laedjwxxdfopfx Affsk Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: used, The FPK 5 is a top-of-the-line Conventional Vertical Milling Machine within the Toolroom Milling Machines category, offering a versatile and robust solution for various milling applications. This universal tool milling machine stands out with its vertical and horizontal spindle configuration, swiveling vertical head, and extensive clamping surfaces, making it an excellent choice for tool and mold making, repair workshops, and educational environments. Designed for flexibility, the FPK 5 excels in single-part construction and small to medium-sized batches, thanks to its easy setup and reliable operation without extensive programming. The machine features exceptional rigidity and performance, a heavy fixed-angle table with high load capacity, and a manual central lubrication system for optimal maintenance. With standard equipment that includes a coolant system, 3-axis position indicator, and easily accessible controls, the FPK 5 is engineered to enhance efficiency and precision. Experience the reliability of KNUTH engineering with this advanced milling machine; buy now to elevate your machining capabilities. Lsdpfx Aswut Evjffoak

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm Laodpowp Tqbsfx Affsk 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 420 mm Lajdewp Tidepfx Affsk 220 mm 380 mm 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40