Sc Sider Fier Srl

Condition: ready for operation (used), Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible. Lrsdoxn S Tvepfx Af Esu

Condition: ready for operation (used), Year of construction: 2016, A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible. Lrsdpfx Aoxmkc Hsf Esu

Condition: ready for operation (used), Year of construction: 2021, A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible. Ledpfx Afew Tc Rwj Esru

Condition: ready for operation (used), Year of construction: 2000, An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible. Ledpfew Igv Hsx Af Esru

Condition: ready for operation (used), A high-voltage motor MENZEL (formerly ASEA) is available. Voltage: 5000V, current: 68.6A, power: 500kW, power factor: 0.77, speed: 591rpm, thermal class: F, protection class: IP54, weight: approx. 4700kg. Documentation available. An on-site inspection is possible. Ljdpfxsw Igv Tj Af Esru

Condition: ready for operation (used), Year of construction: 2021, An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible. Lredpfx Ajwt Tl Hsf Eju

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, power: 1,000 kW (1,359.62 HP), input frequency: 50 Hz, input voltage: 400 V, complete Turboden 12 module Lsdpfxowt Edbe Af Esru

Condition: used, Year of construction: 2014, operating hours: 61,000 h, functionality: unexamined, pressure: 45 bar, power: 30.031 kW (40.83 HP), For sale is a TGM Kanis condensing turbine with generator, operated for 7 years before being decommissioned. For further details, please refer to the exposé. Lodpewtc Tgsfx Af Eeru If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1972, functionality: fully functional, pressure: 19 bar, power: 6,200 kW (8,429.64 HP), input frequency: 50 Hz, type of input current: AC, temperature: 320 °C, total height: 2,800 mm, rotational speed (max.): 7,100 rpm, total length: 4,500 mm, 1. Brněnská strojírna, Turbocharger set, condensing steam turbine of overpressure type 6,2MW Manufacturer: 1. Brněnská strojírna Power: 6200 kW Type: T6,2/6,2 RPM: 7100/ min Steam pressure: 19 bar Steam temperature: 320 ºC Lrsdpfxowqqkbe Af Eju The equipment is from year 1972 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 2800 x 2800 x 4500mm Gearbox, compressor, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was about 5 years according to the actual condition. The repairs were carried out by the turbine manufacturer and the compressor manufacturer. On the basis of inspection and diagnostics in 2016, follow-up GO was carried out in 2016-17 at a total cost of ` 79.3 million. CZK

Condition: used, Year of construction: 1968, functionality: fully functional, pressure: 19 bar, power: 6,200 kW (8,429.64 HP), input frequency: 50 Hz, type of input current: AC, temperature: 320 °C, total height: 2,800 mm, rotational speed (max.): 7,100 rpm, total length: 4,500 mm, 1. Brněnská strojírna, Turbocharger set, condensing steam turbine of overpressure type 6,2MW Manufacturer: 1. Brněnská strojírna Power: 6200 kW Type: T6,2/6,2 Lredpfxewqqi Do Af Esu RPM: 7100/ min Steam pressure: 19 bar Steam temperature: 320 ºC The equipment is from year 1968 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 2800 x 2800 x 4500mm Gearbox, compressor, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was about 5 years according to the actual condition. The repairs were carried out by the turbine manufacturer and the compressor manufacturer. On the basis of the inspection and diagnostics in 2020, a subsequent GO was carried out in 2021-22 with a total volume of CZK 84million.

Condition: used, Year of construction: 1997, functionality: fully functional, pressure: 19 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 90,000 kg, rotational speed (max.): 3,000 rpm, total length: 6,200 mm, type of cooling: water, ŠKODA Plzeň, Turbogenerator set, steam turbine 25MW Power: 25 000 kW RPM: 3000 / min Steam pressure: 19 bar Steam temperature: 320 ºC Number of extractions: 1 The equipment is from year 1997 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 4700x4700x6200mm Weight: 90 000 kg Generator, gearbox, condenser, condensate pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. Lsdpfewqqg Ajx Af Eeru

Condition: used, Year of construction: 1994, functionality: fully functional, pressure: 90 bar, power: 25 kW (33.99 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 34,000 kg, total height: 5,000 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-B1 RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC Number of extractions: 1 The equipment is from year 1994 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Transformator: DTK 25; 25 kVA; 6000/400 V; 2,41 A/36,1 A; Ua = 3,7%; Yz1; IP00; v.č. 1051031 Weight: 34 000 kg Lrjdpfswqqd Usx Af Eeu Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: used, Year of construction: 1999, functionality: fully functional, pressure: 90 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 34,000 kg, total length: 4,500 mm, ABB, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: ABB Power: 25 000 kW Ljdpfx Aowqqckjf Eeru Type: G 36A RPM: 7 547 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1999 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 2 100 x 2 100 x 4 500 mm Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: used, Year of construction: 1958, functionality: fully functional, power: 17,500 kW (23,793.35 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 30,000 kg, rotational speed (max.): 3,000 rpm, total length: 7,000 mm, ČKD, Turbogenerator set, condensate steam turbine 17,5MW Manufacturer: ČKD Power: 17 500 kW Type: RPM: 3000/ min Steam pressure: 19 bar Output steam pressure: 18 bar Steam temperature: 320 ºC Lrjdswqqa Njpfx Af Eou The equipment is from year 1958 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3500 x 3500x7000mm, Weight: Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was carried out according to the actual condition. The repairs were carried out by the turbine manufacturer, the reconstruction (1969) and subsequent repairs were carried out by the 1st Brno Engineering Works. GO with replacement of blades was carried out in 1986 and SO in 2005 with standard scope of work. In the last period, routine maintenance and repairs were carried out by the local maintenance of the heating plant, when the following repairs were mainly carried out: - control maintenance, oil. system, condensation - maintenance of the heat exchanger station - maintenance of valves

Condition: used, Year of construction: 1995, operating hours: 201,000 h, functionality: fully functional, pressure: 19 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 93,000 kg, rotational speed (max.): 3,000 rpm, total length: 6,200 mm, type of cooling: water, Škoda Plzeň, Turbogenerator set, condensate steam turbine 25 MW Manufacturer: Škoda Plzeň Power: 25 000 kW Type: RPM: 3000/ min Steam pressure: 19 bar Steam temperature: 320 ºC Number of Extractions:1+3 Operation hours: 201000 The equipment is from year 1995 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 4 700 x 6 200 mm, Weight: 93 000 Generator, gearbox, condenser, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. GO was carried out by the turbine manufacturer. The last GO was carried out in 2017 for a total amount of 112.6 million CZK. The following repairs were carried out: Lredpfxowqp U Ee Af Eeu - replacement of the old rotor with a new one, - repair of the flow section of the stator and the distributor wheels and supports, - replacement of the gearbox, - repair of the regulation, oil. Repair of the system, condensation, - installation of irrigation and new NZ, Maintenance and servicing was carried out in the years after the GO, the inspection for subsequent repair was planned for 2024 and did not take place.

Condition: used, Year of construction: 1985, functionality: fully functional, pressure: 90 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 515 °C, overall weight: 34,000 kg, rotational speed (max.): 3,000 rpm, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-9/1,9 RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1985 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. Maintenece: Lrjdswqp Edepfx Af Esu The TG2 has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. The O&M was carried out by the turbine manufacturer or a specialist company in the field. The last O&M was carried out in 2010-2011 for a total amount of 47.3 million EUR. The following repairs were carried out: - repair of the rotor with new blading - repair of the stator flow section with new blading - Replacement of quick-stop and control valve blocks - repair of the control - oil revision. system, repair of pumps - revision of steam system, valves, drainage, replacement of steam hinges The last repair (SO) was carried out in 2022-2023 for a total amount of 22 mil. The following repairs were carried out: - inspection of the flow section of the turbine, cleaning, replacement of seals, balancing of the rotor - oil revision and cleaning. system, revision of oil pumps, new radiator tubes - revision and repair of the turbine control and the control safety system - inspection of steam pipes and valves Regular maintenance and servicing was carried out during operation.

Condition: used, Year of construction: 1985, functionality: fully functional, pressure: 90 bar, power: 25 kW (33.99 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 45,000 kg, total height: 5,000 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-9/1,9 Lrjdpfx Afewqp Acj Eeu RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1985 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Weight: 45 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. Maintenece: The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. The O&M was carried out by the turbine manufacturer or a specialist company in the field. The last O&M was carried out in 2007 for a total amount of 44.2 million EUR. The following repairs were carried out: - repair of the rotor with new blading - repair of the stator flow section with new blading - Replacement of quick-action and control valve blocks - replacement of the control gear on the machine, - reconstruction of the control system - repair of oil. system, - revision of steam system, valves, drainage The last repair (SO) was carried out in 2020 for a total amount of 16.2 million CZK. The following repairs were carried out: - revision of the flow section of the turbine, cleaning, replacement of seals, rotor balancing - oil revision and cleaning. Revision of the rotor, cleaning of the rotor, revision of the rotor system, installation of full flow filtration - complete repair of the KUP with repiping, - revision and repair of the turbine control and the control safety system - inspection of steam pipelines and valves Regular maintenance and servicing was carried out during operation, with further periodic repairs planned for 2027.

Condition: used, Year of construction: 1999, functionality: fully functional, pressure: 90 bar, power: 40,000 kW (54,384.80 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 55,000 kg, total height: 4,200 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total length: 5,500 mm, type of cooling: water, ABB Alstom Power Condensing Steam Turbine Power: 40 000 kW Type: VEE50 RPM: 4 727 / 1500 Steam pressure: 90 bar Steam temperature: 515 ºC Number of extractions: 3 Ljdpjwqpwyofx Af Ejru The equipment is from year 2000 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 4 200x5 500x6 600 mm, Weight: 55 000 kg Generator, gearbox, condenser, condensate pumps, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: ready for operation (used), An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Lrodpfx Aewf Nxmsf Eou

Condition: ready for operation (used), Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Lrsdpfx Ajwf Nydsf Eeu

Condition: ready for operation (used), Year of construction: 2008, Speed: 892rpm, current consumption: 660A, Cos: 0.83, power: 355kW, insulation class: F, operating mode: continuous operation. On-site inspection is possible. Ljdpfxsv R Exzj Af Eoru

Condition: ready for operation (used), Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible. Lodpfsvtqtiox Af Eeru

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: J00674, power: 738 kW (1,003.40 HP), temperature: 59 °C, For sale: TURBODEN 10HR ORC System Plant details: Year of manufacture: 2012 Operating hours: approx. 25,000 h Net electrical output: 738 kW Thermal output (district heating): 4,549 kW District heating flow rate: 115 m³/h Inlet temperature: 59 °C Outlet temperature: 93 °C Lrsdpjvrfpiofx Af Eju Additionally included equipment: Thermal oil tank Expansion tank Pumps Control cabinets Further components The plant was professionally decommissioned and preserved by Turboden, ensuring safe continued operation.

Condition: good (used), Year of construction: 2018, operating hours: 27,240 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Jan. 2021; working hours 27240H (just for reference); Ljdpfx Aova Ih Def Eoru power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC surface cooler & extractor; Sulter Dalian condensate pump; Condition installed; the technical information available upon request

Condition: good (used), Year of construction: 2018, operating hours: 13,993 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Oct 2020; production stop Jul 2022; working hours 13993H; power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC extractor, Sulter Dalian Condensate Pump; Condition dismantled by OEM; the technical information available on request Lredpfx Ajva Ifvof Esu