SC Heckler Romania SRL

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes Itsdpfx Aoy St Ncog Iog throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 23 kW (31.27 HP), pressing force: 63 t, table width: 480 mm, table length: 560 mm, ram plate width: 280 mm, ram plate length: 280 mm, total length: 1,800 mm, total width: 1,000 mm, total height: 2,650 mm, overall weight: 4,000 kg, year of last overhaul: 1991, - Fixed stop - Punch damping Itodpfx Aey R Sltog Ijg - Conventional control (contactor)

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW Isdpfxjy Ruqxs Ag Ijtg weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Itedpfxjy Hqz So Ag Iog Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: used, Year of construction: 2000, functionality: limited functionality, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 50 t, stroke length: 100 mm, table width: 770 mm, table length: 530 mm, table height: 58 mm, ram plate width: 450 mm, ram plate length: 300 mm, distance table to ram: 275 mm, overall weight: 3,500 kg, Equipment: CE marking, TECHNICAL SPECIFICATIONS: Press Model: T50 CNR4 Year of manufacture: 2000 Nominal force: 500 kN Mass: 3,500 kg Strokes per minute: 90 Max. insertions per minute: 41 Operating air pressure min./max.: 4 to 5.5 BAR Safety distance: 187 mm Adjustable stroke min./max.: 8 to 100 mm Itsdjy Etqaspfx Ag Ieg Ram adjustment: 70 mm High PMI adjustment: 280 mm Maximum extraction stroke: 30 mm Worktable surface: 770x530x58 mm Ram plate dimensions: 450x300 mm Distance table to ram: 275 mm Shank diameter: 45 mm Throat depth: 270 mm Max. die size: 450x300 mm

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Iedpfx Agsy D R N Ro Ietg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Safety distance: 312 mm Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm Itsdpfx Aeyx Imcsg Iog table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1993, pressure 80 t throat 280 mm stroke 10 - 140 mm Stroke rate 85 / min Distance table/ram, max. stroke up, adjustment up 380 mm Itsdoyx Ikujpfx Ag Ieg Table surface area 850 x 560 mm Hole in the table 300 x 200 mm Table height above floor 790 - 950 mm Ram surface 420 x 210 mm Ram adjustment 60 mm Power capacity 4,0 kW Weight 4,5 t Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse

Condition: used, pressure 075 t throat 230 mm Ijdpfx Ageyx Iido Ijtg stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm Itsdpoyx Ih Hsfx Ag Ijg table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic Isdpoywzh Rofx Ag Istg -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Condition: used, Year of construction: 1970, machine/vehicle number: P5063870, functionality: not functional, power: 4.05 kW (5.51 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 75 t, table width: 800 mm, table length: 620 mm, table height: 740 mm, throat depth: 300 mm, distance table to ram: 450 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 2,700 mm, overall weight: 4,475 kg, year of last overhaul: 2026, punching force: 75 t, compressed air connection: 8 bar, control cabinet height: 1,300 mm, control cabinet length: 350 mm, control cabinet width: 500 mm, DGUV certified until: 05/2027, drop-through hole in table: 250 mm, height adjustment type: mechanical, installation height: 450 mm, mount diameter: 40 mm, ram adjustment: 80 mm, ram bore: 40 mm, stroke adjustment: 140 mm, Stroke adjustment 16-140mm Mechanical safety guard Flywheel drive with reversible idler gear Overall height with raised safety guard approx. 4100mm Additional clamping plate 790x610mm with insert diameter 250x120mm Spring-loaded base Iodpeyv Havofx Ag Iotg

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request. Ijdpsyvzzzefx Ag Ietg

Condition: new, Year of construction: 2022, functionality: fully functional, Table size: 600 x 900 mm Maximum pressing force: 800 kN Stroke length: 0–110 mm Maximum tool size: 400 x 580 mm Motor power: 7.5 kW Voltage: 380 V Weight: 5700 kg Dimensions L x W x H = 1600 x 1500 x 2750 mm Accessories, Equipment - Oil-bath gearbox - Pneumatic clutch-brake combination - PLC control for safety - Photoelectric sensors Isdpfx Aeyr Nv Rog Ijtg - Motorized adjustable slide - Mechanical overload protection - Two-foot and hand pedal control - Adjustable stroke (inverter) - Automatic central lubrication

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Iodpfxsyryt Ts Ag Ietg Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Ram adjustment: 63 mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, neu Iedpfx Aoyq Snmsg Ijtg ca. 8 Wochen ab Auftragse Italien 77000 € 1455.3 € 70 to 4 mm 920 mm 500 mm 180 mm 12 - 120 mm 50 - 80 1/min 8 80 mm 260 mm 560 mm 7.5 kW 1225 mm 1865 mm 3060 mm 7000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety controls - alarms view - overload protector

Condition: used, Year of construction: 1962, pressure 080 t throat 300 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 467 mm table surface area 710 x 560 mm hole in the table 240 x 115 mm table height over floor 800 mm ram surface 400 x 315 mm ram adjustment 80 mm power requirement 7,5 kW weight 5,1 t Itedpjyq Smisfx Ag Iog dimensions (WxDxH) 1,4 x 1,9 x 2,7 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm Ijdpfx Agsyq Sl So Iotg ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Iedpeyn Sdpefx Ag Ietg Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 64000 € 1209.6 € 80 to 900 mm 540 mm 180 mm 4 - 102 mm 54 1/min 490x325 mm 280 mm 380 mm 7.5 kW 2010 mm 1390 mm 2750 mm 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear Itodpfxeynnbdj Ag Iog combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 62500 € 1181.25 € 63 to 750 mm 500 mm 170 mm 4 - 102 mm 54 1/min 490x325 mm 90 mm 270 mm 440 mm 7.5 kW 1800 mm 1150 mm 2750 mm 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment Ijdpfxjynna Te Ag Istg ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm hole in the table 250 mm table height over floor 800 mm Isdpfx Aoynmn Nog Iotg passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1998, Beutler P96-C630 - Eccentric Press - Mobile control panel - Infinitely variable drive - Clutch/brake combination - Overload protection in the ram Itodeyna N Tspfx Ag Iog - Light barrier - Gooseneck lamp - Year of manufacture: 1998 Technical Data - Force: 630 kN - Stroke: 12 - 120 mm - Strokes per minute: 30 - 130 - Max. run-on time: 96 ms - Throat depth: 300 mm - Distance table/ram: 495 mm - Gap between frame walls: 270 mm - Ram area: 450 x 360 mm - Ram adjustment: 120 mm - Table area: 800 x 560 mm - Table opening: Ø 100 mm - Working height: 880 mm - Min. safety distance: 192 mm - Drive power: 5.5 kW - Operating voltage: 3x 400 V / 50 Hz - Machine dimensions (W x H x D): 1800 x 2600 x 1600 mm - Control cabinet dimensions (W x H x D): 800 x 1700 x 450 mm - Weight: approx. 5500 kg

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes Isdpfxsylb Edj Ag Istg - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Used Amada 60ton C frame press for sale Ijdpfx Agsyk D Dtj Istg SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.