Naplast Im- u. Export GmbH

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Hodezub Hrjpfx Anmefk Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: excellent (used), Year of construction: 2018, 2018 Krauss Maffei PX 120-250 All Electric Injection Mold Machine Clamping Force 120 tonnes (Approx. 1200kN). Tie Bar Spacing 470 × 420mm. Mold Platen Dimensions 680 × 610mm (Typical For The PX 120 Series). Opening Stroke 400mm. Maximum Mold Height (Min-Max): 200-550mm. Ejector Stroke 150mm. S/No. 61030113 (2018). With Piovan MDP2 Volumetric Doser, Piovan ETW12-P6 Temperature Controller & Husky H-C6-1-NE02-12 12-Zone Hot Runner Temperature Controller. Overall Dimensions L5.34 x W1.35 x H1.85m. Weight 7,900kg. Hfjdszt Nxgjpfx Anmsk

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Hfjdszt I Srspfx Anmsk Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Hfjdpfxjzt I Rns Anmjk Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: good (used), Year of construction: 2011, 2011 Engel E-Motion 3440/420 T Injection Moulding Machine Hjdpfx Aszt I Ndsnmsfk Working Hours As Of (17.02.26) 65,000. Clamping Unit e-cap 420. Clamp Force To/ kN 420/4200. Opening Force 420kN. Opening Stroke 700mm. Screw Ø80mm, L/D 25. Mold Height Max. 750mm. Mold Height Min. 350mm. Mould Fixing Platens H1,350 x W1,350mm. Tie Bar Distance H920 x W920mm. Ejector Stroke 220mm. Ejector Force Forward/Return 120kN. Mold Weight, Max On Moving Platen/Centre Of Gravity (Without Additional Guide Block) 6,200/315kg/mm. Dry Operation Time 2.1 at 600sec at imm. E-cap 420 Injection Unit: Weight 36 Ton. Drive Power 147.3kW. Injection Unit Heating Capacity (Max.Capacity/Max Zones). 44.7 kW/6n. Total Power Premium ( When Using Compensation Equipment For Correcting The Power Factor Of Machines, plants Or Plant Components, Reactive Current Compensation With Impedance Capacitors Is Necessary) 193 kW. Connected Current Premium 286A ( With Voltage 3 x 380V - 400V + N + PE, 50/60Hz). Cooling Water Consumption Premium 1,980l/h (With An Ambient Temperature Of Maximum 35°C. S/No. 178804 (2011) Weight 12,000kg. Seller Can Assist With Decommissioning If Required.

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Hfjdpfxjzt Ikbj Anmok Control system: Selogica Injection weight: 154.7 g Injection unit .../675 Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: used, Transport platform K140 1-82745500 €329 Hfsdeztw Iiepfx Anmjk Weight per unit: 21 kg 4 swivel shackles €1,291 1774874610 Weight per unit: 2.35 kg The invoice can be found in the documents!

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: VICTORY 330/80 TECH Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand: HOLMLOS Hodpfxjztp Iho Anmofk Schnecken DN: 35 mm Max. Hubvolumen: 110 ccm³ Spritzteilgewicht 100 g/PS Steuerung: CC200 Ausstattung: -Roboter, Hersteller: SEPRO, Typ: AXESS -2 x Kernzüge -Ausblasventil -Förderband -Sicherheitszaun

Condition: excellent (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 154 cm³, injection pressure: 2,429 bar, KRAUSS MAFFEI KM 80-380 CX Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Manufacture: 2019 Operating Hours: 9000 h Your chance to acquire a top-maintained production cell: We are selling a KraussMaffei KM 80-380 CX from 2019, equipped with the proven MC6 control system. The machine has only 9,000 operating hours and runs absolutely smoothly. Thanks to the precise 35 mm screw, this injection molding machine is perfect for the efficient production of demanding technical components. Available for immediate pickup, demonstration possible. Technical Data, Clamping Unit Side Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 1000 kg Technical Data, Injection Side Screw Diameter: 35 mm Injection Volume: 154 ccm Injection Pressure: 2429 bar Screw Length: 23 l/d Screw Speed: 295 rpm Free Injection Rate: 96 g/s PS Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.4m x 1.7m x 2m Total Weight: 3900KG Hfsdpfeztpu Uox Anmek Equipment 3 freely programmable inputs and outputs Screen text German Screen text Polish CEE socket 16A CEE socket 32A Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements BDE interface Interface for color dosing unit Schuko socket 10A Wear-resistant plasticizing unit

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, KRAUSS MAFFEI KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Secure an almost new production system: A compact and highly efficient KraussMaffei KM 80-380 CX from 2021 is for sale. The machine has only run for 6,000 original operating hours and is in immaculate condition. Equipped with the modern, intuitive MC6 control system and a versatile 40 mm screw, this system offers maximum precision for your production. Technical Data Clamping Unit Clamping Force: 800 kN Tie Bar Distance h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Hsdpoztpuzofx Anmofk Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data Injection Unit Screw Diameter: 40 mm Injection Volume: 201 ccm Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s PS Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3m x 1.6m x 2m Total Weight: 3900 KG Equipment 3 freely programmable inputs and outputs Screen text German Screen text Polish CEE socket 16A CEE socket 32A Increased ejector force Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Schuko socket 10A

Condition: used, Year of construction: 1997, Engel ES 1050/200 HL (1997) Machine type: Horizontal Drive / Clamping: Hydraulic Platen size : 820x750 Screw diameter: 55 Hfjdpfx Ansztafdsmsk

Condition: used, Year of construction: 1997, Engel ES 1050/200 HL (1997) Machine type: Horizontal Drive / Clamping: Hydraulic Hfodpfx Ajztadgenmjk Platen size : 820x750 Screw diameter: 45

Condition: used, Year of construction: 2002, Engel ES 750/200 HL (2002) Hfodjzr U Hmopfx Anmjk Machine type: Horizontal Drive / Clamping: Hydraulic Manufacturer: ENGEL Model: ES 750/200 HL Year: 2002 Control: CC100 Clamping force (uzatváracia sila) : 2 000 kN = 200 ton Platen size : 820x750 Screw diameter: 50

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Hjdpjzrwhgsfx Anmofk Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Hfjdpezrwgcjfx Anmok Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Hfedszrwfrjpfx Anmsk Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Hsdpfozrwffox Anmsfk Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Machine type: Tie-Bar-Less Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: 88,000 h Technical specifications: Clamping force: 3000 kN (300 t) Design: Tie-Bar-Less Closing unit: Hydraulic POWER Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit: 2050 Hsdpfx Anozrv A Nsmjfk Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight (PS): approx. 1050 g Injection pressure: approx. 1700 bar L/D ratio: approx. 20:1 Control system: ENGEL CC200 Robot interface: Yes Robot: Not included Hydraulic core control: 2 units Power supply: 400 V / 50 Hz Hydraulic system: POWER Central lubrication: Yes Oil cooling: Yes Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: 20,400 kg

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Hsdpfx Anjzrngysmsfk Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm Hsdpfx Aszrikmenmjfk • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Hsdpfxszrd U Hj Anmefk The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. Hjdpfx Anozrd Ugemsfk For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Hfsdpfx Anezrd Tpjmsk The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. Hjdpfszrd Slex Anmefk The machine has not been inspected but was in working order until the end.

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end. Hodpfxozrd Ruo Anmjfk