Vm Macchine Srl

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,809 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS 810D powerline, table load: 600 kg, TECHNICAL DETAILS Travel X-axis: 640 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Table dimensions: 850 x 630 mm Max. table load: 600 kg Tool magazine: 30 positions Spindle speed: 12,000 rpm MACHINE DETAILS Control: SIEMENS 810D powerline Total power requirement: 42 kW Dimensions & Weight Space requirement (L x W x H): approx. 3.50 x 3.30 x 3.60 m Machine weight: approx. 6.5 t Operating hours Spindle hours: 8,809 h Power-on hours: 52,247 h EQUIPMENT BLUM tool breakage / measurement Electronic handwheel Fpjdpfsy Rymlox Aaljg 3 leveling elements Chip conveyor Coolant / belt filter system Interlit SPB 3/600

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 1,100 mm Z-axis travel: 500 mm C-axis rotation: 360° MACHINE DETAILS Control: CNC Dimensions & weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Fpjdpfx Aajy Rxryjlog Probe

Condition: excellent (used), Year of construction: 2000, operating hours: 1,100 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table load: 500 kg, overall weight: 2,700 kg, spindle speed (max.): 12,000 rpm, FOR SALE: VMC 600/22 Vertical Machining Center – Upgraded High-Speed Unit A high-performance, extensively upgraded vertical machining center is available for sale. This machine has undergone significant technical modernization, greatly increasing its speed and reliability compared to standard models. Fpsdpfx Aey Rvdtoaljg Key Upgrades: - Control System Retrofit (2018): Completely modernized CNC for improved reliability and efficient programming. - High-Speed Spindle: Upgraded to a 12,000 rpm spindle (replacing the standard 6,000 rpm unit). The new spindle has only approximately 300 operating hours. Technical Data: - Travel paths: X: 600 mm, Y: 410 mm, Z: 520 mm - Worktable: 840 x 420 mm (max. load: 500 kg) - Tool changer: 22-position tool magazine - Rapid traverse rates: X/Y 40 m/min, Z 20 m/min - Spindle taper: BT 40 - Machine weight: approx. 2,700 kg This VMC is a production-ready powerhouse. Thanks to the high-speed spindle upgrade, it is perfectly suited for modern high-speed machining and efficient material removal.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Fpodpfx Aasy Rta Ejlog Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Mounting elements BNV 150/4

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm Fjdpfx Ajy Rpa Isaljpg

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Fjdjy Rgalepfx Aalopg Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Electronic handwheel

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, table width: 450 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, Model: 610L Control: Fanuc Series Oi-MC Year: 2012 Table Area: 800 x 450mm ‘X’ Axis: 610mm Fpedoy N Uh Uepfx Aaljg ‘Y’ Axis: 460mm ‘Z’ Axis: 450mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Carosel 12 Station Tool Changer Dimensions: 2200 x 2300 x 2300mm high Weight: 3400 KGS

Condition: excellent (used), Year of construction: 2007, Controller Mitsubishi 64S Travel X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load capacity 250 kg Spindle speed 12,000 min⁻¹ Tool magazine for 24 tools, BT 40 Internal coolant 20 bar Exhaust system Fpsdpfx Aasy N D Hgoljg Chip conveyor

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Fpodpfxoy Nzuhe Aalsg Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: good (used), Year of construction: 2006, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, nominal power (apparent): 34 kVA, controller manufacturer: Heidenhain, controller model: Itnc530, spindle speed (max.): 120,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Kondia S600 SEASKA – 5-Axis CNC Machining Center (Heidenhain iTNC530, 12,000 rpm, 40 Tools) For sale is a powerful and precise Kondia S600 SEASKA. This machine is configured as a 5-axis machining center (XYZ + A/C) and is ideally suited for complex milling operations in professional environments. Technical Features and Highlights: * Heidenhain iTNC530 CNC control * 5-axis machining (X, Y, Z, A, C) * Linear glass scales in X, Y, and Z * SK40 spindle taper * Spindle speed up to 12,000 rpm * Internal coolant system with 50 bar pressure * Tool magazine with 40 positions * Integrated chip conveyor * Includes complete rack of SK40 tool holders Travel Distances and Performance: * X: 660 mm * Y: 400 mm * Z: 510 mm * Rapid traverse X/Y: 36 m/min * Rapid traverse Z: 30 m/min * Feed rate: 5 m/min Machine Data: * Footprint: 3243 x 3351 x 2745 mm (L x W x H) * Weight: approx. 7,000 kg * Solid cast iron construction A current geometry inspection report is being prepared and will be supplied with the machine. Condition & Viewing: The machine is in well-maintained and fully functional condition. Viewing under power is possible on site. A test machining (sample milling) can also be arranged, allowing you to directly verify the machine’s condition and precision. Fodpfx Aey Nwqfjaljpg * Sale to commercial customers / businesses only * Price is net, plus statutory VAT * Subject to prior sale, errors, and change * No warranty, returns, or liability ⸻ If seriously interested, please contact us. Viewing under power available at any time.

Condition: new, 3-fold attachment table for Hermle C20U, with 3 rotary tables rotating synchronously, programmable via the C-axis. Also available for C800U, B300U, C600U, C30U, C250U, and C32U. In use at renowned companies multiple times over the past 20 years. Machine 3 workpieces simultaneously, reducing tool changes and increasing machine uptime. For inquiries, contact: huber-cnc.com Fodpfoy Nkfvjx Aalepg

Condition: used, Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Equipment: chip conveyor, MACHINING CENTER DMG MORI DMC 650 V Year: 2017 Manufacturer: DMG MORI Model: DMC 650 V CNC Control: Celos with Siemens 840D Machine dimensions: 4725 x 5090 x H 2670 mm Weight: 5,900 kg AXIS TRAVELS X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Rapid traverse: 42 m/min Feed rate: up to 42,000 mm/min SPINDLE speedMASTER Spindle speeds - Continuously programmable: up to 20,000 rpm - In setup mode: 800 rpm Motor power - Max. drive power (40% duty cycle): 35 kW - Rated power (100% duty cycle): 25 kW Torque - Max. spindle torque (40% duty cycle): 130 Nm - Rated torque (100% duty cycle): 86 Nm Tool holder: SK40 Tool clamping force: 11.2 kN TABLE Table size: 960 x 570 mm T-slot spacing: 100 mm Number of T-slots: 4 / 14H12 Reference slot: 1 / 14H7 Max. table load: 800 kg Loading height (floor to table top): 800 mm 4TH AXIS – NC ROTARY TABLE MORI SEIKI DDRT 200X Center height: 140 mm Table diameter: 200 mm Center hole diameter: 65H7 mm Clamping surface diameter: 50 mm Clamping slot: 14h6 mm Clamping torque: 600 Nm Max. torque: 280 Nm Rotational speed: 150 rpm Positioning time: 5 s Repeatability: 3 s Max. workpiece diameter: 250 mm Max. speed: 200 rpm Load capacities - Max. clamping weight (one-sided): 102 kg - Max. vertical load: 100 kg - Max. vertical load with tailstock: 250 kg - Max. horizontal load: 250 kg Weight of NC rotary table: 115 kg TOOL MEASUREMENT – TT160 Probing accuracy: < 15 µm Max. deviation of measuring element: 5 mm Axial triggering force: 8 N Radial triggering force: 1 N Max. probing speed: 5 m/min Protection class: IP67 (EN 60529) Working temperature: 10–40°C CHIP CONVEYOR WITH COOLANT EXTENSION SYSTEM Coolant tank capacity: 230 l MACHINE COOLING UNIT Effective cooling capacity: 4.5 kW Cooling circuit pump: 40 l/min Fpsdpfx Asy Nkcnjalog Refrigerant: R 134a Coolant: Water - Antifrogen® L 70/30 % Coolant filling volume: 38 l Coolant discharge temperature: +15° to +30°C Permitted ambient temperature: +10° to +45°C Unit weight (dry): 130 kg Additional Information Operating hours: approx. 2,200 20-position tool magazine Machine supplied with manuals and CE certificate of conformity All technical data provided are for reference only and subject to change without notice, and therefore are not legally binding.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 22,465 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HERMLE C 600 V was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a tool magazine that holds 30 slots and an internal coolant supply of 10 bar. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 V vertical machining centre we have for sale. Contact us for further details. Fpodpfey Ndu Rox Aaljg • Tool magazine: 30 slots • Internal coolant supply (IKZ): 10 bar • Operating hours: • Control on: 88,852 h • Machine on: 79,968 h • Program run: 26,348 h Additional equipment • Chip conveyor • Spindle air blast • Handheld control unit • Cooling system: KNOLL EKA/700 (YOM 1998)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, The following machine components have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially) - Control cabinet LT module replaced - Drum of the Knoll system TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 560 mm Travel distance Z-axis: 560 mm B-axis: 360 x 0.001° (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS CNC control model: Siemens Sinumerik 840D Total length: 7,000 mm Total width: 5,000 mm Coolant supply: 50 bar Coolant system capacity: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total power requirement: 20 kW Fpedpfoy Nbunox Aaljg Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on time: approx. 48,804 h Spindle operating hours: total 23,574 h EQUIPMENT - Documentation/Manual - Steplessly adjustable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-command) - Tool measurement: Renishaw probe - Tool breakage monitoring in the working area - Pallet storage (4 positions) - Pallet sequence operation - Fully enclosed work area in accordance with UVV - Network capability - Technical documents & layout plan

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,956 h, functionality: fully functional, machine/vehicle number: 17211, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: Siemens Sinumerik 840 D solution Line, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Fpedsy Nbt Depfx Aalog Max. workpiece height: 850 mm Max. pallet load: 500 kg Pallet changer: 2 pallets, automatic Change time: approx. 8 s Tool magazine: 60 tools Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D Solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Coolant supply: 80 bar Operating hours Total operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (Teamviewer) Energy-efficient system with regenerative feedback Standby mode for energy savings Direct drive NC rotary table 6-channel clamping hydraulics (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Renishaw OMP60 optical touch probe Tool breakage control Pallet sequence operation Crane infeed/outfeed software Signal light for operating states Work area/machine equipment: shower nozzle, cleaning pistol, vortex nozzle, emission extraction interface Foot switch for air nozzle Documentation: fully digital (PDF)

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm control Heidenhain TNC 430 spindle speed: 10000 U/min Fjdpfx Aaey I A Umjlepg power capacity - milling spindle 13/9 kW feed 30 m/min rapid traverse 30 m/min no. of workpieces in the magazine 24 Stück tool taper SK 40 table surface area 800 x 500 mm table load 0,5 t Overall size 1,9 x 3,3 x 2,6 mm weight of the machine ca. 4500 kg Used vertical machining centre in good condition. - external eletronic hand wheel - coolant system - servo tool magazin

Condition: good (used), Year of construction: 2005, operating hours: 15,742 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, DMC 64V linear / Year of manufacture 2005 Heidenhain control 530 3-axis machining center 30-position tool changer Travel: X640mm (linear drive) Y600mm Z520mm Spindle: SK40 Max. speed: 18000 rpm Max. feed rate: 40000mm/min Fodpfxey Iw H Ro Aalopg

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: VMX1-06203123BEB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, rapid traverse X-axis: 19 m/min, rapid traverse Y-axis: 19 m/min, rapid traverse Z-axis: 13 m/min, nominal power (apparent): 13 kVA, controller manufacturer: HURCO, controller model: ULTIMAX, total height: 2,600 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 355 mm, table length: 760 mm, table load: 340 kg, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, HURCO VMX 1 CNC vertical machining center Fsdpey Iwnzsfx Aalepg - Note: Without the vises shown in the photos! Attention: The item must be collected between 23.06. and 25.06.2026 on a date to be arranged. FCA D-73230 Kirchheim Teck – loaded onto truck

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 280 mm, table length: 280 mm, table load: 300 kg, rotary table diameter: 280 mm, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 189, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This HERMLE C30 U is still currently in production and will be available from week 42. The machine is still in daily use for extremely high-precision machining and is also in excellent condition, having always been perfectly maintained by HERMLE NL. The complete maintenance history is available after purchase. (Viewing on site is possible by appointment) Additional options & accessories: - Extended tool magazine (ZM 157) - Pallet system RS1 (KUKA robot) including pallets and Soflex control system - NC rotary table Ø280 mm - Chip conveyor - 6-fold pass-through - A-axis position eccentric Fpedpfx Aaey Ib Daslsg - Internal coolant supply (IKZ) (40 - 80 bar) - Conveyor belt filter for IKZ - Chip trolley 450L - Blow-off device - Air blast through the spindle - Electronic heat compensation iTNC - Electronic handwheel - Renishaw probe - Oil mist extraction Weight & dimensions: C30 U: 10,000 kg, RS1: 4,000 kg, ZM175: 2,500 kg Setup dimensions: approx. 6.5 × 4.5 m, floor space: ≈ 29 m²

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 528 mm • Tool changer capacity: 16 stations • Working hours (from display): • Control on (Steuerung ein): 68,311 h Fsdpfsy H Irbex Aalspg • Machine on (Maschine ein): 65,234 h • Program run (Programmlauf): 13,572 h Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details. • Table size: 1000 x 600 mm • Tool magazine: 2x12 positions • Under power and well maintained machine. Fedpfsy Hktbjx Aalepg Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Additional options & accessories: Fsdpfx Aajy E N Dcjlepg - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Weight & dimensions: 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH)

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MV0009-001573, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 33 kVA, overall weight: 5,000 kg, type of input current: three-phase, Doosan DNM 400 – Vertical machining center. CNC milling machine for precise metalworking. Suitable for drilling, milling, and tapping operations. Reliable and accurate, ideal for industrial use. Fodpfx Aoy E Hqgsalspg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, spindle speed (max.): 30,000 rpm, spindle nose: HSK63, Equipment: chip conveyor, rotational speed infinitely variable, Röders RXU1000DSH X-axis: 700 mm Y-axis: 855 mm Z-axis: 500 mm The clearance height between spindle nose and machine table is 600 mm Spindle: HSK63F, max. 30,000 rpm Tool magazine: 24 slots – optionally expandable Equipment: - Automatic machine calibration for highest accuracy - Spindle compensation - Compressed air through spindle - Remote maintenance - Emulsion cooling with IKZ 40 bar - Emulsion mist extraction - Work area rinsing - Automatic 3D probe - Blum tool measurement laser - Workpiece cleaning with compressed air The machine is completely overhauled, measured, and inspected in our facility. It fulfils the original manufacturer's specifications regarding geometry! Fpjdpsy E Aa Dsfx Aaljg

Condition: like new (used), Year of construction: 2023, operating hours: 2,983 h, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: RMS6, spindle speed (max.): 24,000 rpm, spindle nose: HSK63A, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Röders RXP601 DSH incl. Automation RCE2 X-axis: 540 mm Y-axis: 635 mm Z-axis: 400 mm Clearance table/spindle: 485 mm Spindle: HSK63A, 24,000 rpm MHT medium distributor incl. holders and nozzle bodies included Compressed air through spindle Machine table: Erowa UPC 320x320 Tool changer: 64 positions Preparation for emulsion cooling and high-pressure coolant (IKZ) Options package: - Thermo package for maximum precision - Spindle compensation - Blum measuring laser for tool measurement - Handbox with display - Workpiece cleaning with compressed air - Tool cleaning with spray medium - Automatic machine calibration for maximum precision even with fluctuating temperatures - UPS for machine control - Remote maintenance - 3D measuring probe, automatically thermostable cone - Oil mist extraction with mechanical filter - Emulsion machining, preparation for high-pressure 40 bar pressure stages - Medium distributor: 1 medium/3 delivery rates - Medium distributor operation with MV2 - Front machine door as automatic lift door - Chuck control, dual pneumatic - Job manager RMSMain - Stainless steel internal cover - 3D machine model Automation RCE2: 10-position pallet changer for Erowa UPC pallets with max. dimensions 340x340 mm Fjdey Ez Utopfx Aaljpg Maximum load per pallet: 300 kg