Proto Tools Kft

Condition: ready for operation (used), Year of construction: 2018, operating hours: 40,365 h, General Data Kjdpfx Ajxpyuwjfisdu Machine weight 22000 kg Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 2500 kN Opening stroke 650 mm Max open daylight 1500 mm Distance between bars 630 x 630 mm Ejector stroke 200 mm Ejector force for / back 60 kN Additional Equipment Injection unit: 13000 kg Clamping unit: 9000 kg only hot runner is includeed This Otto Systems eKW 250/5500 PET was manufactured in 2018. It features a clamping force of 2500 kN, a screw diameter of 100 mm, and a maximum injection speed of 250 mm/s. The machine has a dry cycle time of 1.6 seconds and a total weight of 22000 kg. If you are looking to get high-quality injection molding capabilities, consider the Otto Systems eKW 250/5500 PET machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Kdedexpuvcopfx Afieu Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, Engel Victory 330/110 Tech General Data Year of manufacture: 2004 Kdedpfx Ajxpuhrjfieu Control system: CC200 Itsw Aew Rc A Is Nkftsn Weight: 7,400 kg Dimensions (L × W × H): 5.2 × 1.6 × 2.2 m Injection Unit Injection unit: 330/... Screw diameter: 30 mm Specific injection pressure: 2178 bar Injection volume: 113 ccm Shot weight: 103 g Clamping Unit Mould clamping unit: 110/... Clamping force: 110 t Platen dimensions: 680 × 740 mm Tie bar spacing: tie-barless mm (no exact value provided) Opening stroke: 500 mm Ejector System Ejector force: 40 kN Ejector stroke: 130 mm

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Description SGM Operating hours Cycle counter Cylinder heating Electric drives Kdsdpfx Afoxpufdsiju Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Ksdpfxjxpudme Afisdu Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm

Condition: used, Year of construction: 2010, Arburg Allrounder 470 H 1000-170, year of manufacture 2010 Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Kodoxpublspfx Afisdu Shot weight: 77 g With Arburg robot

Condition: used, Year of construction: 2017, Arburg 470S 1100-290, year 2017, 2-component machine. The machine has been idle for some time without a contract. It is from 2017 and has only around 21,600 operating hours. The machine features a clamping force of 1100kN; the lower unit is equipped with a 290 injection unit with a 35mm screw, while the upper unit has a 100 injection unit with a 30mm screw. Up to now, only ABS and TPE materials have been processed. The machine is equipped with an integrated hot runner system and three core pulls, as well as additional options. Included in the scope of delivery is a Kuka handling robot, which is operated via the machine’s Selogica control system, along with the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Kodpfx Aoxpuanjfiedu

Condition: excellent (used), Year of construction: 2006, operating hours: 45,200 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM200-700C2 Baujahr: 2006 Schließkraft: 200 Tonnen Holmabstand 560 x 560 mm Schnecken DN: 45 mm Max. Hubvolumen: 305 cm³ Spritzteilgewicht: 278 g/PS Steuerung: MC5 Ausstattung: Roboter GHS Baujahr: 2004 Verschleißarme Plastifizierung 1 St. Kernzug 1 St. Förderband Sicherheitszaun Ca. 45.300 Betriebsstunden Kdjdpfexpnpiox Afisu

Condition: excellent (used), Year of construction: 2010, operating hours: 43,000 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM160-750CX Baujahr: 2010 Schließkraft: 160 Tonnen Holmabstand 520 x 520 mm Schnecken DN: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht: 228 g/PS Steuerung: MC5 Ausstattung: Roboter, Hersteller: GHS, Baujahr: 2012 Schnittstelle Temperiergerät Verschleißarme Plastifizierung Kdsdpfexpnkaex Afieu 2 St. Kernzug 1 St. Förderband Sicherheitszaun

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine elektrisch mit Angußpicker Hersteller: FERROMATIK Typ: EE50-55 ELEKTRA 50 evolution Baujahr: 2012 Schließkraft: 50 Tonnen Kodpfxoxpnc Aj Afiedu Holmabstand 320 x 320 mm Schnecken DN: 22 mm Dosiervolumen: 29 ccm³ Spritzteilgewicht 26 g/PS Steuerung: MOSAIC Ausstattung: -1 x Kernzug -Angußpicker, Hersteller: WITTMANN, Typ: W702, Baujahr: 2012

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8200 Injection Unit Screw diameter 50 mm Kedoxpknhjpfx Afiodu Clamping Unit Clamping force 2000 This DEMAG Extra 200-840 hydraulic injection moulding machine was manufactured in 2008. Ideal for precision plastic processing, it offers robust functionality and reliability. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Kdodpfxexpkmdj Afieu Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Distance between bars 800x710 mm Size of mold platens 1200x1100 mm This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1600 kN Additional Equipment Kodpfoxpknbox Afiodu Robot Demag DR711 available at extra charge. This DEMAG Systec 130/475-430 was manufactured in 2011. It features a clamping force of 1600 kN and tie bar spacing of 475x475 mm. The screw diameter is 40 mm, and it includes both pneumatic and hydraulic valves. An additional robot, Demag DR711, is available at an extra charge. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Systec 130/475-430 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding Kjdpfx Ajxpkqiofisdu

Condition: used, Year of construction: 1994, Used injection moulding machine from Engel Type: ES 500 100 HL Clamping force: 100 tons Max opening stroke: 500 mm Hydraulic return stroke: 130 mm Max mould height: 250 mm Installation height: 750 mm Ksdpfoxphz Ejx Afisdu

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Kdodpfx Aoxn Uy Sofisu Ejector stroke 200 mm Ejector force for / back 130 kN This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Kdjdpfxoxn N H To Afieu Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: excellent (used), Year of construction: 2016, operating hours: 35,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 700 cm³, injection weight: 600 g, For sale: Injection moulding machine by Engel, model Victory 1050/300 The machine is in very good condition, fully functional, and available at the end of 2025. Technical specifications: Year of manufacture: 2016 Operating hours: approx. 35,000 Clamping force: 300 t Screw diameter: 60 mm Shot volume (theoretical): 608–763 cm³ Shot weight: approx. 550–687 g Max. injection pressure: approx. 1,725 bar Kdsdpfx Aoxn Npzjfieu Platen size: approx. 1,100 x 1,100 mm Length: approx. 7.3 m Weight: approx. 19.8 t Equipment: - 1x hydraulic core pull - 12x electrical heating circuits - 4x Kistler mold cavity pressure sensors - 4x programmable I/Os - 8x temperature monitoring units - Needle shut-off nozzle - Host computer interface - Reject chute interface - 1x blow air valve A robot system was installed by the previous owner; this is not included. Photos available upon request. Transport and loading within Europe can be organized at an extra cost upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange welcome! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. Kdedpfx Afsxn Aygoisu About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Condition: used, Year of construction: 2009, Horizontal injection moulding machine from Billion. 2,500 tons clamping force. Year of manufacture: 2009. Includes Sepro SR 4070 robot from 2016, conveyor belt, and safety enclosure. Technical Details CLAMPING FORCE: 2,500 t YEAR OF MANUFACTURE: 2009 SCREW DIAMETER: 145 mm Kjdpexnxz Hofx Afiedu More technical information available on request.

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Kjdpfx Afjxnd Sqeiedu Injection Moulding

Condition: excellent (used), Year of construction: 2007, operating hours: 62,680 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 254 cm³, injection pressure: 1,580 bar, injection weight: 232 g, mold height (min.): 250 mm, opening stroke: 500 mm, heating capacity: 28.7 kW (39.02 HP), Arburg 470C-1500-400 (250) injection molding machine with sorting flap Number: 250 Availability: in stock Year of production: 2007 Producer: Arburg Kdjdpsxnazhefx Afieu Screw diameter [mm]: 45 Injection weight [g]: 232 Injection pressure [bar]: 1580 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 28.7 Working hours [h]: 62680 Weight [kg]: 4900 Dimensions [mm]: 4500 x 1700 Feed hopper: NO

Condition: excellent (used), Year of construction: 2009, clamping force: 1,800 kN, BATTENFELD HM 180 /525H/60V Clamping force: 180 t Year of manufacture: 2009 Kjdpfxjxm Su Dj Afisdu Shot weight: 175/20.8 g Injection unit .../525/....60 Screw diameter: 35/18 mm Specific injection pressure: 2743/2593 bar Injection volume: 193/22.9 ccm Shot weight: 175/20.8 g Screw L/D ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Tie bar spacing: 570 x 520 mm Mould height: 305 mm Ejector stroke: 200 mm Equipment: Servo-driven rotary table 3 x hydraulic core pulls

Condition: excellent (used), Year of construction: 2019, operating hours: 12,188 h, functionality: fully functional, machine/vehicle number: 233832, clamping force: 1,200 kN, screw diameter: 40 mm, mold height (min.): 300 mm, ejector stroke: 130 mm, opening stroke: 507 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,854 mm, total width: 1,508 mm, total height: 2,503 mm, overall weight: 6,800 kg, pressure: 1,300 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, ENGEL VICTORY 500/120 SPEX injection molding machine, 2019, 120T, ECODRIVE, CC300, 12188 h For sale: ENGEL VICTORY 500/120 SPEX injection molding machine in excellent working condition. The machine has been used in a single production facility, regularly serviced and maintained, fully operational and ready for immediate use. Technical details: Year of manufacture: 2019 Operating hours: 12 188 h Clamping force: 120 tons Type: tie-barless Mounting plate with centering hole Ø125 mm Central ejector 12 heating zones for hot runner (Euromap 14), up to 22 kW total power Sliding hopper base Bimetallic barrel Screw type S8, GPS (G1), Ø40 mm, L/D 20 Non-return valve UNR9 (R9B) Ceramic heating elements ECODRIVE hydraulic package – SHV1 CC300 controller (languages: Polish, English) Ecograph, IQ weight monitor Power supply: 3x400V + N + PE / 50Hz 4-fold rotameter Contactless position sensors 4 programmable digital inputs and 4 outputs Piovan S52 material loader (150 kg/h) Weight: 6 800 kg Condition: For sale: ENGEL VICTORY 500/120 SPEX injection molding machine in excellent working condition. The machine has been used in a single production facility, regularly serviced and maintained, fully operational and ready for immediate use. Technical details: Year of manufacture: 2019 Operating hours: 12 188 h Clamping force: 120 tons Type: tie-barless Mounting plate with centering hole Ø125 mm Central ejector 12 heating zones for hot runner (Euromap 14), up to 22 kW total power Sliding hopper base Bimetallic barrel Screw type S8, GPS (G1), Ø40 mm, L/D 20 Non-return valve UNR9 (R9B) Ceramic heating elements ECODRIVE hydraulic package – SHV1 CC300 controller (languages: Polish, English) Ecograph, IQ weight monitor Power supply: 3x400V + N + PE / 50Hz 4-fold rotameter Contactless position sensors 4 programmable digital inputs and 4 outputs Piovan S52 material loader (150 kg/h) Weight: 6 800 kg Condition: excellent, available for inspection and test run. Ksdpfjxmu N Dex Afisdu Location: Hajnowka, Podlaskie, Poland

Condition: excellent (used), Year of construction: 2021, Engel victory 2460/400 spex (2021) Clamping force: 400 t Screw diameter: 70 mm Distance between tie bars V: 1100 mm Distance between tie bars H: 1200 mm Shot volume: 1212 cm3 Type: Horizontal Kdodpfoxmidvsx Afisu Drive: Hydraulic