Golden Food Services

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Hedsx Iff Iepfx Ad Tepa Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: good (used), Guide cylinders, pneumatic guide cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-20-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 20 mm -Sliding guide -Number: 2 cylinders available -Price: per piece Hjdpfx Adex Iffzs Tspa -Dimensions: 110/85/H35 mm -Weight: 1.0 kg/pc.

Condition: used, Year of construction: 1999, 1 piece SCM T130N spindle moulder with ducting and various accessories, as shown in the photos and inspection, self-dismantling. Colour: grey. Year of manufacture: 1999. Condition: used. Payment method: advance payment via bank transfer. Storage location: joinery/hall 2. Shipping: Collection only – shipping is not offered for this item! Hjdpfx Asx Iffujd Tepa

Condition: used, Yaskawa Motoman Robot SP 800N with NX100 Controller Controller: NX 100 Number of axes: 5 Max. payload: 80 kg Max. working range: 2236 mm Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Hpodpfx Adox Iffne Tea 2 weeks start-up guarantee. No further warranty. Spare parts are permanently available from stock. The robot is fully functional and available for inspection. Free loaded / ex works.

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO XAHS237+ portable compressor with aftercooler, fully serviced Technical data: Capacity: 14.20 m3/min; Working pressure: 12 Bar; Hodpfx Adsx Iffho Tepa Year of manufacture: 2017; Engine: MERCEDES MTU; Operating hours: 4910 h; Compressor is fully operational, ready to work, with warranty Net price: 175,500 PLN Gross price: 215,865 PLN Machine imported in excellent condition

Condition: excellent (used), Year of construction: 2005, operating hours: 34,131 h, functionality: fully functional, machine/vehicle number: 592, total length: 3,500 mm, total width: 4,000 mm, total height: 3,200 mm, input voltage: 230 V, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2023, working width: 1,000 mm, working height: 750 mm, working length: 1,500 mm, Huber & Grimme P-T-F 15-10 – 5-Axis CNC Milling Machine with Full Enclosure: Working dimensions: 2x1500x1000x750 mm Machine & Equipment: -Huber & Grimme P-T-F 15-10 -Year of manufacture: 2005 -5 controlled axes -22 kW high-frequency spindle -Automatic tool changer -Siemens 840D SL/Num -Servo drives on all axes -400 V / 50 Hz electrical system -Spindle type: HF 100 A 45 CKPV Included in the sale: -Full machine enclosure / safety cabin -Electrical control cabinet -Cooling unit and vacuum system (as shown) Applications: -Aluminium, plastics, composites, wood -Model and mould making Machine is sold as a complete unit, including enclosure and electrical system, as shown in photos. Inspection possible by appointment. Hodpfxsx Iffbe Ad Topa

Condition: used, ABB Robotics IRB 2400L S4C+ M2000 robot complete Controller: S4C+ M2000 Number of axes: 6 Max. payload: 7 kg Max. working range: 1800 mm Hpodpox Ifd Refx Ad Toa Scope of delivery: robot, controller, cables, teach pendant, circuit diagrams 2-week commissioning warranty. No further guarantees. Additionally, spare parts are continuously available from stock. The robot is fully functional and can be inspected on site. Free loaded / ex works.

Condition: used, 1 pc. combination wide belt sander OTT COMET-1 with sanding belts, max. working width 1100mm, max. workpiece thickness 160mm, min. workpiece thickness 3mm, as per photos and inspection, self-dismantling required. Colour: green. Condition: used. Payment method: advance bank transfer. Location: carpentry shop/Hall 2. Shipping: Collection only - No shipping offered for this item! Hsdpfx Ajx Ifd Ded Tspa

Condition: used, Year of construction: 2000, 1 unit Bandsaw EUMACOP ER500 mobile, as per images and inspection Colour: grey Hpedpfx Ajx Ifdqjd Tea Year of manufacture: 2000 Condition: used Payment method: Advance payment by bank transfer Storage location: Joinery/Hall 2 Shipping: Self-collection only – shipping is not offered for this item!

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Hedpfox Ifdkjx Ad Tjpa Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 23 kW (31.27 HP), motor manufacturer: Kubota, gearing type: hydrostat, empty load weight: 3,260 kg, color: red, Equipment: all wheel drive, lighting, pallet forks, retractable fork, sideshift, Truck Mounted Forklift: + Moffett + M4 25.4 + Year of manufacture: 2008 + 4-way forklift + 4-cylinder Kubota diesel engine, 29 HP + Protective canopy + Amber warning light + Duplex mast 400 cm + Side shift + Extendable forks + Load capacity: 2,500 kg Hedpfx Adjx Ifdds Tspa + Unladen weight: 3,260 kg + Operating hours not readable Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Subject to errors and prior sale!

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos Hodpfx Ajx Ifc Ted Topa -Dimensions: Ø 950 x 410 mm -Weight: 35 kg

Condition: good (used), Technical data for pallet rack upright: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet rack upright, used Material finish: Sendzimir galvanized Upright type: P177 Profile dimensions: 100 x 75 x 3.0 mm Includes horizontal and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (bolted truss design) Hodpfsx Ifc Hox Ad Topa Height: 9,900 mm Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is only offered for collection. Any further transport or shipment of this item is subject to additional costs, which can be individually requested from us depending on place of delivery or scope of delivery.

Condition: not inspected (used), Year of construction: 2008, operating hours: 500 h, overall weight: 1,000 kg, Warehouse clearance ALMIG Variable 35 with heat exchanger – hot water Drive power 40 kW The compressor was purchased for a new project and has been stored unused in the warehouse for years. Therefore, no functional guarantee can be given. Hjdpsx Ifcyofx Ad Topa

Condition: used, Year of construction: 2015, 1 pc. edge banding machine BRANDT OPTIMAT KDF440C with piping and various accessories, as shown in the pictures and as inspected, self-dismantling required. Colour: grey. Year of manufacture: 2015. Condition: used. Payment method: advance bank transfer. Item location: carpentry workshop/Hall 1. Shipping: Collection only – shipping is not offered for this item! Hsdpfx Aex Ifctod Tepa

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster TOP machine Price on request Hjdpfx Adox Ifcmo Tepa

Condition: used, Year of construction: 2015, operating hours: 12,250 h, functionality: fully functional, machine/vehicle number: 15062269, Control unit: Fanuc Oi mate-TD Hpodpfjx Ifcgox Ad Tja

Year of construction: 2012, condition: used, Make of engine: Perkins Hedpfxsx Ifcas Ad Tspa Tank pressure: 5.1 bar

Year of construction: 2010, condition: used, New: No Power: 515 kW (700 HP) Hpsdpfx Adsx Ifb Ns Tja VAT/margin: VAT qualifying

Condition: good (used), functionality: fully functional, machine/vehicle number: WÜTS2017, mileage: 135,290 km, power: 120 kW (163.15 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 1,970 kg, maximum load weight: 1,080 kg, overall weight: 3,050 kg, next inspection (TÜV): 11/2026, fuel: diesel, energy efficiency: D, color: white, gearing type: automatic, number of gears: 9, emission class: euro6, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, sliding door, soot filter, start-stop system, tire pressure monitoring, 9147 Paint Color Arctic White MB 9147 Hpodpfx Adsx Ifb Ae Tea A1O Rear axle shaft manufactured by IFA BB7 CO2-optimized braking system C70 Pedestrian protection CF0 Standard suspension CL1 Steering wheel adjustable in tilt and height CL4 Multifunction steering wheel with trip computer D50 Continuous partition E07 Hill start assist E1D Digital radio (DAB) E2R Radio generation 2 E34 Buffer battery for starting process EA4 Audio 40 EY2 Pre-installation for Live Traffic Information F68 Heated and electrically adjustable exterior mirrors FKA Panel van FR1 Rear camera non-retractable FR8 Reversing camera FY7 Multi-button remote control G43 9G-Tronic H20 All-round heat-insulating glass HH9 Semi-automatic climate control TEMPMATIC HZ0 Electric auxiliary heater IB6 Series C447 Vito/V-Class IG4 Standard IG5 Basic IL5 Left-hand drive IN2 Wheelbase 3,200 mm, long rear overhang J55 Seatbelt warning device for passenger seat JF1 Rain sensor JH3 Communication module (LTE) for digital services JK3 Instrument cluster with pixel matrix display JX2 Service interval 40,000 km KB6 Main tank 57 liters KP7 Exhaust aftertreatment SCR generation 4 L Left-hand drive LA2 Light assist LE1 Adaptive brake light MG9 Generator management MJ8 ECO start-stop function MK8 Speed limiter 210 km/h MS1 Cruise control MT6 Emission standard Euro 6D N1 Gr.III/N2 MU4 Engine OM654 DE 20 LA 120 kW (163 PS) MX0 BlueEFFICIENCY package S00 Airbag control unit generation AB12 S02 Driver's seat S23 Dual passenger seat SA6 Passenger airbag V20 Upper interior trim, cargo area panels V30 Sidewall interior trim in load/passenger compartment V3L All-weather floor mats V43 Wooden floor VF4 Caluma fabric black VV9 Mounting points in roof frame W50 Double rear doors, 180 degrees, without window XA6 Weight variant 3.05 t XI2 Revision year G2-I XM0 Model update XO9 Mercedes-Benz Mobilovan with DSB and GGD XU1 Signs/Prints German XW1 Control code conversion water load XW9 Control code conversion WLTP XZ1 Model generation 1 Z41 Registered as truck ZM0 Panel van

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 Hsdpfx Aex Ifbvod Topa - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: used, Yamato 714 Multihead Weigher Fully Stainless Steel | Rigidized | Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments. Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products. The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation. Hpodpfxjx Ifbij Ad Tsa ----- Specifications – Yamato 714 Weighing Heads - 14 heads Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible Speed - Up to 90 weighings per minute (product dependent) Chute Type - Flat chutes (ideal for frozen/hard products); angled chutes available Controller - Optional upgrade to RCU810A (color touchscreen) Build Material - Fully stainless steel, rigidized/dimple-plated finish Condition - Fully serviced and reconditioned – ready to run Applications - Frozen products, meat, seafood, hard candy, root vegetables, and more Product Size - Handles medium to large items (depending on setup) Highlights - Durable rigidized finish minimizes product sticking - Optional RCU810A controller for intuitive operation - Ideal for harsh environments (cold rooms, frozen packaging lines) - Alternative units available for soft/fresh produce (angled chutes) - In stock now – fast delivery possible! ----- 📦 Available Immediately 📍 Inspected and ready at our facility 📞 Contact us for pricing, viewing, or more details!

Condition: used, Year of construction: 2011, 1 unit panel saw HOLZMA HPP250/38/38 with piping, as per photos and inspection, self-disassembly required. Colour: grey. Year of manufacture: 2011. Condition: used. Payment method: advance payment by bank transfer. Storage location: carpentry workshop/Hall 1. Shipping: Pickup only – shipping is not offered for this item! Hsdpsx Ifbcofx Ad Tepa

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Included: Sheetmaster, Toolmaster, Gripmaster Price on request TOP machine Hedpsx Ifa Sofx Ad Tspa

Condition: used, functionality: fully functional, power: 58 kW (78.86 HP), overall weight: 11,000 kg, operation weight: 9,060 kg, Year of construction: 2005, operating hours: 3,800 h, Bomag BW 174 AD tandem roller with spreader Hpsdpfex Ifa Eex Ad Toa Year of manufacture: 2005 3,800 operating hours 58 kW Cummins engine 9060 kg to 11,000 kg All steering types Drum width: 1.68 m Grit spreader Amazone N602