Michael Preißel Vermietung

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Rbsdpfoyf Eigex Ahzot * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Metba MB1 with 3-Axis Digital Readout Technical Specifications: >> Year of manufacture: approx. 1980 >> 3-axis digital readout (Mitutoyo) >> Fixed angle table >> Spindle speed: 45 - 2050 rpm >> Feed on 2 axes: 11-490 mm/min >> Travel (X/Y/Z): 300/150/340 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill extendable – SK-40 Rjdpoydc Spsfx Ahzebt >> Drawbar system S20x2 >> Weight: approx. 700 kg Accessories and Features: >> 3-axis digital readout (Mitutoyo) >> Coolant system >> Various tool holders >> Operating manual About the Machine: For sale is a Metba MB1 universal milling machine in very good condition. The Metba operates smoothly even at high spindle speeds. There is minimal backlash and all spindles move easily. The MB1 comes from private ownership and has seen very little use. Mechanically and electrically tested. The digital readout enables easier and more precise work. You are welcome to inspect and test the machine under power on site.

Condition: used, Year of construction: 1985, 1 unit universal milling machine, manufacturer Deckel, model FP 4 MA, serial no. 2204.1463, year of manufacture approx. 1985, Deckel Contour II control, milling table approx. 800x500 mm, 7 T-slots, approx. 25 tool holders. Rbodpfx Ahjyaxl Djzet

Condition: used, 1 piece universal tool milling machine, make Deckel type FP 4 A, serial no. 2204-1177, control by Grundig Elektronik, milling table approx. 800x500 mm, 7 T-slots. Redpfxeyaxk Ts Ahzobt

Condition: good (used), Year of construction: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control System, Year of Manufacture 1990, Completely Overhauled in 2014, Excellent Condition, CE Compliant! This machine comes from the training workshop of Continental. Technical Data: Year of Manufacture: 1990 Completely Overhauled: 2014 Digital Readout: 3-axis active digital readout HEIDENHAIN TNC 113 X-Axis Travel: 500 mm Rodpoyalcpefx Ahzebt Y-Axis Travel: 400 mm Z-Axis Travel: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Speed Range: 50 - 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface Table: 800 x 490 mm T-slot Size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, control manual, and programming examples Hand wheels Coolant system About the machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control unit. This universal milling machine is in excellent original condition, having only been used for training purposes in a facility. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is straightforward thanks to the tilting vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Deckel under power on-site. You will find more milling machines from renowned manufacturers on our website.

Condition: used, Table size 630 x 200 mm X/Y/Z - 250/200/300 mm Spindle speeds 2000 rpm Spindle taper MT 4 Automatic feeding & rapid feeding in all directions Equipped with Universal inclining table 500 x 200 mm Drilling head w/60 mm movement Rotary table 250 mm Redsyaai Ropfx Ahzobt Rotary dividing table 250 mm Dividing head Vice 140 mm Collet chuck w/various collets Coolant

Condition: used, x-travel 300 mm y-travel 275 mm z-travel 200 mm spindle tunring speed 40 - 2.000 U/min tool taper ISO 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Redpfx Ahox Uru Ajzjbt

Condition: used, functionality: fully functional, For Sale: Riventing Machine NE211 022 Condition: used, functional, Testing: Available at seller’s location Location: Autoliv Poland Sp. z o.o., ul. Belgijska 2, Jelcz-Laskowice, Poland We invite you to visit our facility where the machine is currently stored. Rodpfx Ahsx Tfknozebt Agreed price should include logistics cost on customer side. Two pieces available

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Rodpfx Ahjx Tdy Iozebt Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required Rodpfx Ahjx S Edljzobt - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: refurbished (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 31 rpm, type of input current: three-phase, rotational speed (max.): 6,300 rpm, rotational speed (min.): 31 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this overhauled DECKEL FP 2NC with TNC 320 tool milling machine, year of manufacture 1982. Manufacturer: DECKEL Model: FP 2NC with TNC 320 Year of manufacture: 1982 Condition: Completely overhauled Control: TNC 320 Machine type: Tool milling machine Rbedjx Sv Rcopfx Ahzet If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, DECKEL dividing head for direct and indirect dividing Includes the following equipment: - with tailstock - with draw tube - with 3 division plates Rjdex Sdf Uopfx Ahzebt Optional: 3-jaw chuck and/or 4-jaw chuck

Condition: reconditioned (used), functionality: fully functional, Dear Sir or Madam, We hereby offer a Deckel FP1 milling machine, 3-axis active, retrofitted with safety features. These later-generation machines are equipped with, among other things, central lubrication, an electric coolant pump, and a brake motor. Additionally, thanks to Harting connectors, the control cabinet can be quickly and easily disconnected from the machine. The safety components are also connected to the control cabinet via these connectors, ensuring ease of handling is maintained. We provide a 12-month warranty on the retrofitted safety features, which we offer for all machine types! *The electronic spindle guard can be adjusted on multiple axes and is designed to prevent access to the working spindle as well as hazards caused by flying chips, coolant, etc.* *The electronic spindle safety cover is intended to prevent contact with the rotating stub shaft and tool clamping mechanism.* Delivery time: On request Year of manufacture: 1989-1992 Machine number: 2102-xxxx Table: Fixed angle table Travel paths: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: including 3-axis digital display with Heidenhain Active Control, coolant system, central lubrication, machine mounts, technical documentation, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master craftsman business specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we will fully or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices, etc. Rbjdpfx Asx Rvlqohzjt - We are happy to take care of shipping and/or installation

Condition: good (used), DECKEL universal table, Support surface 800 x 380 mm Rbjdpfxsx N R D Ss Ahzet 8 T-slots See photos for condition

Condition: ready for operation (used), Year of construction: 1972, Deckel FP1 tool milling machine, swiveling angular table, MK 4 spindle taper. Accessories: tailstock support, various collets. The machine is in operational condition and can be demonstrated under power by arrangement. Rsdpfex Nclnjx Ahzjbt

Condition: good (used), Universal Milling Machine DECKEL FP3 with 3-Axis Active Heidenhain Digital Display - Travel X/Y/Z: 500x300x400 mm - Spindle speed range: 25 - 2500 rpm - Infinitely variable feed in all 3 axes - Rapid traverse in all 3 axes - Vertical and horizontal milling capability - Vertical head adjustable on spindle bracket Rodox I Rnbopfx Ahzobt - Vertical head swiveling with boring quill - Tool holder ISO 40 - Drive power 2/4 kW - Coolant system - Vise - Tool cabinet with accessories - Documentation Dimensions: LxWxH 1.7x1.5x1.8 meters / Weight: 1700 kg Subject to errors and input mistakes

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric Rbjdpfxox It Rxj Ahzst - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Heidenhain Digital Display and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine No.: 2201-5598 >> Rotary-swivel tilting table (newly planed) >> Spindle speed: 25 – 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm Redpox Ig Dxefx Ahzobt >> Vertical milling head on spindle carrier adjustable by 200 mm >> Vertically and horizontally extendable quill – SK40 >> Drawbar system M16 >> Weight approx. 1,500 kg Equipment & Accessories: >> 3-axis active Heidenhain TNC113 digital readout >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in excellent condition. The machine has minimal backlash on the handwheels and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable on all three axes, and it features rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can input dimensions which the machine automatically moves to. Oil has been changed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Condition: new, Year of construction: 2025, feed length X-axis: 300 mm, feed length Y-axis: 165 mm, feed length Z-axis: 280 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 330 mm, quill stroke: 70 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 40 rpm, overall weight: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC. This is a true all-rounder for training workshops and small batch production. The Macmon provides a conventional base in combination with a Heidenhain TNC128 CNC path control system, making this model an absolute must-have in certain work environments. And the best part: With a footprint of just one square meter, this machine fits into any workshop! Technical Standard Specifications: • Heidenhain TNC 128 control (integrated into the control panel) • Ribbed cast-iron construction with hardened and ground guideways on the column and slide • 360º swivel vertical head • Extendable quill, stroke 70 mm • Removable vertical head for switching between vertical and horizontal milling operations • Dovetail guides on all axes • Precision ground leadscrews on all axes Rjdsx H Nw Sjpfx Ahzsbt • Mechanical tool clamping for both vertical and horizontal spindles • Tool holder ISO 40 for tools according to DIN 2080 AT 3 with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical mounting surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN linear measuring systems, direct, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm • Horizontal milling device, console and end bracket • Chip tray, blue RAL 5019 • Paintwork: blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD with TNC 128 programming instructions • 1 inspection log and basic circuit diagram • 1 hand-operated oil pump • With counter bearing, plain bearing bush ø 16 mm (sliding bearing) for milling arbor length 230 mm • Machine lamp • Chip guard system (required safety device according to EN 13128 for EU countries)

Condition: good (used), TOOL MILLING MACHINE - Macmon M 100 -Digital readout -Travels X/Y/Z 310x340x170 mm -Spindle speed range 40–2500 rpm -Automatic feeds -Feed range in steps 9–450 mm/min -Tool holder ISO 40 -Swiveling vertical head -Quill / vertical head 70 mm -Horizontal–vertical milling setup -Rigid angle table 600x225 mm -Cooling unit -Drive power 2.5 kW -Chip tray -Work light -Machine feet -Documentation Rjdpfxox H Iz Ao Ahzjbt Dimensions (LxWxH): 1.5 x 0.8 x 1.7 meters / Weight: 950 kg Errors and omissions excepted

Condition: excellent (used), Tool Milling Machine DECKEL FP 2 with new 3-axis digital readout from laboratory operation - Well-maintained original condition - Travel X/Y/Z 400x200x400mm - Digital readout 3 axes "NEW" - Swivel table – clamping surface 700x350mm - Spindle speed range 40 – 2000 rpm - Automatic feed / rapid traverse on all three axes - Tool holder ISO 40 - Vertical - horizontal milling device - Vertical head swiveling with quill - Coolant system - Documentation Dimensions: Rbjdsx Hahuopfx Ahzet LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg Subject to errors and input mistakes.

Condition: good (used), functionality: fully functional, Infinitely variable feeds on all axes Quill stroke 60 mm Rjdpfx Aex A S Dqshzobt Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feeds 10 – 470 mm/min...infinitely adjustable... : Longitudinal travel (X) 315 mm Cross travel (Y) 180 mm Vertical travel (Z) 320 mm .

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: Rbedpfxsx A Edde Ahzst - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: good (used), TOOL MILLING MACHINE DECKEL FP 1 - Travel X/Y/Z: 245-150-340 mm - Without vertical head / Machine was used exclusively for horizontal milling operations - Speed range: 95 - 1900 rpm - Dividing head - Automatic feeds on X & Y axes - Various collets and tool holders - Documentation included Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight: 600 kg Errors and omissions excepted Rjdpfx Aox A D Nfohzsbt

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty Rbedpfx Ahox Ada Rjzst The machine conforms technically to the state of the art at the year of manufacture.