MTO Metalltechnik Ostalb

Condition: used, Year of construction: 2004, Functionality: fully functional, Wagner WMC 1100 Year of manufacture: 2004 Control: - Siemens 810D Ceempa2Dxy Main spindle: - Max. 8000 rpm Travel ranges: - X-1100, Y-650, Z-600mm Tool changer: - 24 magazine positions Work table: - 1300mm x 600mm - Table load capacity: 500kg Availability: - Immediately

Condition: used, Year of construction: 2008, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, MAXIMART MACHINING CENTER TYPE VMC 1520 Cecbbbhioo YEAR 2008 HEIDENHAIN CNC TNC

Condition: excellent (used), Year of construction: 2015, The machine is in good technical condition, after prior agreement possible to test. worked 5.285 hours. Travels X=1050mm, Y=510mm, Z=630mm, A=360??. CNC probes Bloom Cd0Qybia70

Condition: excellent (used), Year of construction: 2015, The machine is in good technical condition, testing is possible after prior agreement. Total operating time of the system as of 31.07. 2024 is: 15,264 h - since it was custom production (setup times are longer + programming) I assume that the number of operating hours can be approximately 8,000 to 10,000 h (the machine/system is usually also started during the lunch break/even during programming +000) 0 h corresponds to approximately 80 to 100 h per month (March 2016 to July 2024 = 100 months), which is quite realistic for piece production - the machine is in very good visual and technical condition - the machine is connected and in operation - the machine is possible, clamps, tools ...) Specifications of the DOOSAN DNM 650 II machine: - control system: SIEMENS 828D - spindle with direct drive: 12,000 rpm - two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - oil cooling of the spindle head - thermal compensation system (software) - working area (travels 6) X/Y /Y/Z: 36/36/30 (m/min) - Max. cutting power: 18.5 kW - tool magazine: 30 tools - RENISHAW tool and workpiece probe - internal cooling through the spindle center: 12 Bar - external cooling with air and cutting fluid - internal screws + chip conveyor - coolant tank: 380 l - GB rinse - forward block reading for 3D machining - handwheel for feed. It is possible to purchase accessories for the machine worth up to 20,000 euros. Cd0Khnq9Lu

Condition: good (used), Year of construction: 2016, The machine is in good technical condition, after previous agreement the possibility of testing. X, Y, Z - 1.016 x 508 x 635 mm Table size: 457 x 1.219 mm Drh0Tf Max. table load: 1.438 kg

Condition: used, Year of construction: 2016, Technical details: longitudinal: 1.150 mm cross: 700 mm Drh0Oz vertical: 550 mm Tool Changer: 30 Pos. turning speed range: 20 -14.000 1/min tool taper: SK 40 power capacity at 100 % load: 14,5 kW power capacity at 40 % load: 20,3 kW table surface area: 1.460 x 750 mm max. table load: 1.500 kg control: HEIDENHAIN TNC 640 rapid speed: 42 m/min dimensions of the machine ca.: 2,77 xx 2,9 x 2,60 m weight of the machine ca.: 8,8 t vertical machining center, 3-axis simultaneously, internal coolant supply 40 bar, 600l, paper filter, bed flushing, cabin roof, airblast through spindle and from outside, direct measuring system, electr. handwheel, chipconveyor, prepared for 3D touch probe HEIDENHAIN TS 649, ROTOCLEAR, oilmist-suction, 12.500 hours machine on 4.100 hours spindle on *

Condition: excellent (used), Year of construction: 2016, 3-Axis Vertical Machining Center Year of manufacture: 2016 Cdxdzfllji Manufacturer: Kovosvit MAS Type: MCV 754 Quick Control: HEIDENHAIN tnc 530 Tool magazine: 24 positions Axes: X/Y/Z - 754/500/550 mm Max. table area: 1,000 x 500 mm Max. table load: 400 kg Max. spindle speed: 10,000 rpm

Condition: good (used), Year of construction: 1996, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 5,600 mm, Machine Details Stock No. 1105-04061 Type of machine Machining Center - Vertical Cdv9O3Bznc Make VICTOR Type VCENTER 80 Year of manufacture 1996 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time to be agreed upon Freight basis EX WORK Price Technical details x-travel 800 mm y-travel 500 mm z-travel 560 mm feed speeds x/y/z axis 18 m/min distance spindle center to column: 600 mm tool taper BT-40 spindle drive 5.5 / 7.5 kW spindle turning speed - stepless 8000 rpm table dimensions (lengthxwidth) 950 x 500 max. table load 750 kg tool magazine: 32 max. workpiece weight 7 kg Additional information Including accessories, tool tapers, tools and documentation. FANUC OM chip convoyer

Condition: good (used), Machining center Cincinnati-Arrow, Model VMC-1000, Drhynz good condition. X-axis 1,000 mm, Y-axis 500 mm, Z-axis 700 mm, Spindle 10,000 rpm, X-axis overhauled in 2022

Condition: used, Year of construction: 1998, Equipment: documentation/manual, For sale BMC 4020, can be tested from the workshop Cdoxsdeypi , in good condition.

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, controller model: 0I MD, total height: 2,940 mm, table length: 1,300 mm, overall weight: 7,200 kg, spindle speed (max.): 8,000 rpm, space requirement length: 4,400 mm, space requirement width: 4,100 mm, CONTROLS .. CNC controls FANUC 0I MD Drhsup WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. .. among of them simultaneous CNC axes: 3 .. X-axis travel: 1100 mm .. Y-axis travel: 650 mm .. Z-axis travel: 600 mm TABLE .. table surface (left-right): 1300 mm SPINDLE / HEAD .. spindle revolutions (max): 8000 /min TOOL MAGAZINE .. number of positions: 40 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4400 mm .. space requirements -front/back-: 4100 mm .. total height: 2940 mm .. total weight approx.: 7200 kg Operating hours 1500 h Furnishing: - 3D buttons - Breakage control - div Werkzeughalter - 2 Goody Schraubstock

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 1096687, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 1,200 mm, table length: 400 mm, Equipment: chip conveyor, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table dimensions: approx. 1,200 x 400 mm EQUIPMENT - Tool changer - Chip conveyor - Swivel axis - Oil mist extraction Further information according to the manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 794 kg Drhr7V Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.9 x 2.7 x 2.7 m Weight: approx. 5.7 t

Condition: used, Year of construction: 2013, operating hours: 7,500 h, Haas VM-3, the machine was used for toolmaking. The machine has 3+2 axes, but the rotary tilting table is currently uninstalled. 12,000 rpm Internal cooling Drhqad

Condition: excellent (used), Year of construction: 2020, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer: Technical specifications: Control: Heidenhain TNC 620 - X-travel: 1100 mm - Y-travel: 560 mm - Z-travel: 510 mm Main spindle: - Max. speed: 12,000 rpm - Drive power (40/100%): 13/9 kW Work table: - Table clamping area: 1400 x 560 mm Tool changer: - Tool holder: SK40 / DIN 69871 - Number of tool positions: 30 Feed rates: - Rapid traverse: 30 m/min - Operating hours: approx. 7,300 h - Spindle hours: approx. 3,000 h Technical equipment & accessories: 4th axis/NC rotary table Manufacturer: Lehmann rotofix Type: EA- 510.L Including indirect measuring system and clamping bridge Clamping torque: 800 Nm with counter bearing GLA.TOP2-150 (clamping torque: 2000 Nm) Max. speed: 80 rpm Center height to table (with base plate): 180 mm - Scraper belt chip conveyor - Internal coolant supply, 20 bar, 250 l tank - Bed and ATC flushing - Electronic handwheel - Direct position measuring system in x, y, and z - Renishaw PP40 probe kit, including OTS probe for tool measurement, measuring cycles with tool breakage detection, calibration mandrel, and calibration ring - Tool loading and unloading through magazine door - DXF import software option - Software option for NC rotary table Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Drhnmb Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2019, Machine type: CNC machining center vertical Drhm2P Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control: DMG MORI Celos Year of manufacture / Ib: 2019 / 2022 Location: Germany Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Holder taper approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Floor space L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main drive with higher torque - Tool holder cone for BT-40 tool holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor including 2 internal screw conveyors and drum filter - I/F for high-pressure coolant system 70 bar, Knoll/Interlit - Mechanical I/F for oil mist separator (extraction opening, Ø 200 mm) - Oil separator - Spindle sensor measuring system with optical signal transmission, Renishaw OMP60 + workpiece adjuster - Table sensor measuring system tactile, Magnescale + tool adjuster (tool length only) - Signal light (red, yellow, green, blue) - Automatic door on the right side - I/F for hydraulic clamping device (two clamping circuits) - Workpiece positioning control (2 circuit) - EtherNet I/P interface - I/F for connecting a robot (EtherNet/IP), EtherNet/IP I/F is necessary - Column elevation 200 mm - Water-glycol cooler unit for the work spindle #40, built-in - 10 additional M commands - MPC (Machine Protection Control) - MVC (Machine Vibration Control) - Milling of pockets and islands - Fast fixed cycles - Coordinate system rotation - MATRIS handling package (workpiece storage 14 stations Ø150 mm) - Robot: FANUC M710iC/70, for workpieces up to max. 20 kg

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand HAAS Model NGC Main Drive Spindle speed range 12000 Spindle motor power 22.4 KW Number of axis 3 Movement X-Axis Movement 1016 mm Y-Axis Movement 660 mm Z-Axis Movement 635 mm Table Outer length 1372 mm Outer width 610 mm Min distance between vertical spindle and table 107 mm Max distance between vertical spindle and table 742 mm Table load 794 kg Media Chip conveyor Yes Additional Equipment CNC control HAAS (NGC version), compatible with Fanuc ISO40 spindle taper, CT type HSM – High-Speed Machining Minimum quantity lubrication system (MQL)Minimum quantity lubrication system (MQL) Wireless probing system (includes SO, MACRO, COORD, and VPS)Wireless probing system (includes SO, MACRO, COORD, and VPS) Additional 25μm filtration system Through-spindle coolant (TSC) – high-pressure pump (21 bar, 22 l/min) Fourth and Fifth-axis drive and wiring This 3-axis HAAS VF-3 SSYT was manufactured in 2019. Ideal for precision machining, this vertical machining center offers robust construction and high-speed capabilities. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3 SSYT machine we have for sale. Contact us for more information. Drhg2T Application Types Milling

Condition: good (used), Year of construction: 2013, Vertical Machining Center Machine type: MTcut V110 T Control: Heidenhain iTNC 530 Year of manufacture: 2013 Commissioned: 2014 TECHNICAL DATA: Travel paths: X-axis: 1,100 mm Y-axis: 610 mm Cbhrrtx7S3 Z-axis: 610 mm Rapid traverse: (X/Y/Z): 32 m/min. Feed rate: (X/Y/Z): 12 m/min. Distance from table surface to spindle nose: 120 - 730 mm Max. speed: 10,000 rpm. Torque: 332 Nm Drive power: 13 kW Tool holder: SK 40 Tool positions: 30 Table size: 1,250 x 610 mm Max. table load: 900 kg Connected load: 35 kW Machine weight: 7,500 kg Features: Chip conveyor Internal cooling (IKZ): 22 bar Coolant tank: 250 l Air through spindle center Electronic handwheel Measuring probe: TS640 Optional options (surcharge): Rotary table: Lehmann EA520, faceplate: 350 Counter bearing Heidenhain CC422, additional axis

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2400 Measurements depth 2800 Measurements height 2600 Machine weight 7000 Main Drive Spindle speed range 14000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 1020 mm X-Axis Working Feed 6 m/min X-Axis Rapid Traverse 42 m/min Y-Axis Movement 500 mm Y-Axis Working Feed 6 m/min Cazjgpkpzy Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 500 mm Z-Axis Working Feed 6 m/min Z-Axis Rapid Traverse 42 m/min Table Outer length 1320 mm Outer width 600 mm Tslots size 18 mm Number of tslots 6 Table load 1000 Tools Slots in storage 32 This 3-axis MORI SEIKI NV 5000 a1 B/40 was manufactured in 2007. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this MORI SEIKI NV 5000 a1 B/40 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2011, operating hours: 4,300 h, Functionality: fully functional, machine/vehicle number: 119G110444, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, controller model: Fanuc 18iMB, total height: 2,860 mm, total length: 2,920 mm, total width: 2,820 mm, table width: 600 mm, table height: 1,200 mm, table load: 500 kg, rotational speed (max.): 12,000 rpm, overall weight: 7,400 kg, operating hours of spindle: 4,300 h, coolant supply: 20 bar, We are selling a used Quaser machining center in good condition. Additional photos are available upon request. The machine is also available for inspection. Drgyev

Condition: new, Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 40 kVA, torque: 623 Nm, controller manufacturer: Fanuc, controller model: 0iT, workpiece weight (max.): 3,000 kg, total height: 4,000 mm, total length: 4,200 mm, total width: 4,300 mm, table width: 850 mm, table length: 1,500 mm, table load: 3,000 kg, overall weight: 16,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 20 bar, spindle motor power: 45,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool mount: 50 mm, tool length: 300 mm, tool weight: 20,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Double-column machining center SK50 tool holder Torque 630 Nm Table load 3000 kg Drgxkd 8000 rpm Internal coolant supply Distance between columns 1670 mm Spindle nose to table surface 150-850 mm 45 kW 3 or 4-year warranty

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 CNC control Heidenhain iTNC 530 Travel paths Drgvv7 X-axis 1040 mm Y-axis 600 mm Z-axis 500 mm Feed 40 m/min (X/Y/Z) Rapid traverse 40/70 m/min. (Y/Z-X) Table surface 1250 x 600 mm Table load 600 kg Spindle speed 1 - 8000 1/min. Power 13/19 kW at 100/40% ED Torque 140/200 Nm (S1/S6) Tool holder SK 40 Total power requirement 39 kVA Machine weight 8880 kg Transport dimensions 4100 x 2500 x 3000 mm Equipment: Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-way tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Electronic handwheel Heidenhain HR 410 Operating mode 4 Program check with extended manual intervention Machine documentation

Condition: good (used), Year of construction: 1998, operating hours: 13,255 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, This 3 axis machine center is located in Switzerland and has only been used for single-part production in prototype manufacturing throughout its entire lifespan. Maintenance and servicing have been carried out with exceptional diligence. The machine has reached a certain age and is to be removed from operation immediately. Machine Data – DMC 103 V Type: DMC 103 V Year of Manufacture: 1998 Operating Hours: 13,255 Control System: Heidenhain TNC 426 Travel Path (X/Y/Z): 1000 x 600 x 600 mm Accessories: Various holders Tool Taper: SK40 Magazine Positions: 24 Spindle Speed: 20 - 8000 RPM B93Zoafgx0 Condition: The machine is in good condition and connected to power Demonstration: The machine can be demonstrated on-site at any time Comprehensive spindle overhaul in 2023 – silent, top-quality performance even at maximum speed Required Space (LxWxH): 4800 x 4500 x 2300 mm

Condition: good (used), Year of construction: 2010, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 610mm C axis Table (360 degrees) Drgqgj +/- 90-degree head (B axis), 18kW Spindle Motor, 40 station side arm ATC, 40 spindle taper, 12,000rpm spindle, Hurco Winmax control, coolant, swarf conveyor

Condition: used, Year of construction: 2018, Technical details: x-travel: 1067 mm y-travel: 610 mm z-travel: 610 mm table surface area: 1270 x 610 mm table load: 1360 kg turning speeds: 12000 1/min tool taper: SK 40 Drgpaf control: Max 5 tool change unit: 40 Pos. rapid traverse: 38 / 38 / 32 m/min distance spindle /table: 152 - 762 mm spindle: 15 kW total power requirement: 28 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,9 x 3,8 x 2,75 m vertical machining center, chipconveyor, internal cooling system 20 bar counter working hours 12.100 h mainswich ON 4.600 h spindle ON commissioning April 2018 we have two machines of this model ! *

Condition: used, Year of construction: 2018, Technical details: x-travel: 1067 mm y-travel: 610 mm z-travel: 610 mm table surface area: 1270 x 610 mm table load: 1360 kg turning speeds: 12000 1/min tool taper: SK 40 control: Max 5 tool change unit: 40 Pos. rapid traverse: 38 / 38 / 32 m/min distance spindle /table: 152 - 762 mm B9Yk8H9Wya spindle: 15 kW total power requirement: 28 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,9 x 3,8 x 2,75 m vertical machining center, chipconveyor, internal cooling system 20 bar counter working hours 13.600 h mainswich ON 5.100 h spindle ON commissioning October 2018 *