Tatmetal Çelik Sanayi ve Ticaret A.Ş.

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: S7, pipe diameter (max.): 140 mm, pipe length (max.): 8,000 mm, CONTROLS .. SIEMENS S7 FEEDSTOCK TUBE .. external diameter max.: 140 mm .. lenght max.: 8000 mm Cedpfxex Dh Une Ab Teaa MACHINE CHARACTERISTICS SWAGING .. force: 1000 kN .. stroke rate (max.): 560 /min AHM 100 pointing hammer machine with ‘S’ slide feed device – maximum performance for professional tube processing The AHM 100 pointing hammer machine is the ideal solution for industrial companies that need to cold spot and reduce tubes to the highest quality. With its robust construction, high forming force and fully automated operation, it enables the economical production of drawn and folded angles, as well as the precise cold forming of round and square tubes. The result: stable angles, optimum material flow at the start of drawing and efficient drainage of pickling and bonding fluids. Processable materials & specifications The AHM 100 is designed for high loads and demanding materials: Tube diameter: 20–140 mm Wall thickness: 1–6.5 mm Tube length: 3,000–8,000 mm Material: steel pipes with a strength of up to 800 N/mm² Crookedness: 2.5 D over the entire pipe length Working height: approx. 1,050 mm This makes the machine ideal for a wide variety of production environments – from steel processing and pipe profile technology to drawing mills. Technical highlights of the AHM 100 pipe spotting hammer machine -Maximum forming force: 1,000 kN – high performance even with thick pipe walls -Stroke rate: 560 min⁻¹ for efficient and fast processing -45 kW main motor power at 1,450 min⁻¹ -Total input power: approx. 60 kW -Four synchronously operating forming tools for maximum deformation -Tool holder with quick-release fastener → drastically reduced set-up times -Sinusoidal kneading motion thanks to eccentric drive → optimum forming quality and low tool load -Automatic recirculating lubrication → virtually maintenance-free -Optional: electronic overload protection with force display Productivity on a new level – with the ‘S’ slide feed device For maximum feed forces, greased or bonded tubes, we recommend the addition of the ‘S’ slide feed system, specially designed for the AHM 100. Infinitely variable feed speed: 0–100 mm/s Sled stroke: max. 600 mm Infinitely variable speed of clamping head: 0–50 min⁻¹ Insertion force: 2.5 kN Hydraulic unit power: 11 kW The clamping jaws – available in plastic or steel – are suitable for all working ranges without the need for changeovers. Rotational movement, clamping force and feed are independently adjustable – for absolute process control. Scope of delivery: Separation (SEMA) AVS-100 Available documentation

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 4500 Kg Codpfxjx Aw Ins Ab Tjaa This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Application Types Bending

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Cajdpfox Aw Hkox Ab Tja Application Types Bending

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 4000 mm Measurements depth 9000 mm Measurements height 3200 mm Machine weight 12000–14000 kg Control Unit Cedpfx Ajx Aw Hdjb Toaa Brand Prima Main Drive Number of axis 5 Laser power 3 kW This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Laser with 8kw and chiller Open Cabin with right and left side accessible doors Safety glasses on the doors NIGHT Cut for safer cutting and piercing process SMART Cut for faster processing of thin material MAX Cut for piercing process time reduction for thick material Gas Mixer Cut Nozzle check and OPC by camera Adaptive cut ATC automatic tip changer with 20 nozzle stations This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Application Types Cjdpfx Absx Aw Dis Teaa Cutting

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_24, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control Csdpfsx Atxisx Ab Teaa 36 month guarantee

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_16, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection Cedpfx Absx Atwlj Tjaa

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_14, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) Cedpfxjx Atwfe Ab Tsaa - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_23, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Csdpfx Abex Atvus Tsaa Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_33, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Cajdjx Atvhopfx Ab Toa Tool carousel for 4 lower tools Tool case with 22 pressing tools Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27_1, PressOne P1S-10 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-10 Main press technology: ball screw with AC servo drive Maximum pressing force: 100 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: * 120 mm / s Press speed: max 10 mm / s Throat: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 5 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening Cjdpfx Ajx Atuqob Toaa - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2027, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B Codpfxsx Attyj Ab Toaa L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2026, Tool cabinet for press brake Caedpfox Attgex Ab Toa Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835_20_28, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated Cajdpfex Atr Asx Ab Toa -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 3483520_28, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm Cajdpfjx Atrisx Ab Tea - Number of shelves: 4 pieces / completely continuous

Condition: good (used), Olive rolling machine with 3 different moulds... Cajdpfox Alaxox Ab Tja

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand SIEMENS Cajdpfx Aoxz H Smeb Tsa Model SIMATIC HMI Main Drive Number of axis 3 Additional Equipment Includes tube and mandrel rod support. Bending mandrel is hydraulically extendable with a programmable pre-release. Bending mandrel has automatic minimal quantity lubrication. Oil cooler equipped. This 3-axis TRACTO-TECHNIK Tubotron 30 CNC was manufactured in 2008. It features a programmable sequence control, Simatic Panel PC 677 for menu navigation, and manual or automatic operation modes. The machine includes a free-standing bending head, hydraulic pipe clamping, and a hydraulic long-neck chuck for precise positioning. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 2 Caedpfsxz H Nxox Ab Tja This Salvagnini S4X was manufactured in 2008. A robust CNC punching machine, it operates on 400V with a nominal power of 33kW and a current of 58A. Ideal for high precision and efficiency in sheet metal processing. If you are looking to get high quality punching capabilities consider the Salvagnini S4X machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 1980, condition: ready for operation (used), Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible. Cajdpfx Absxz Ewuo Tja

Year of construction: 2014, operating hours: 40,236 h, condition: ready for operation (used), General Data Machine weight 15000 kg Caodpfxsxzvtye Ab Tsa Measurements height 2500 mm Dimensions Machine Length 12900 mm This Bystronic Bysprint Fiber 4020 was manufactured in 2014. It features a large cutting area with dimensions up to 4064 mm by 2032 mm and a maximum cutting thickness of 20 mm for steel. The machine supports a fiber laser source with 6000 W power, ensuring precise and efficient cutting. Consider the opportunity to buy this Bystronic Bysprint Fiber 4020 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Csdpsxzlr Ssfx Ab Toaa Application Types Punching

Year of construction: 2007, condition: ready for operation (used), Additional Equipment Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Csdoxzltvspfx Ab Toaa Application Types Bending

Year of construction: 2005, operating hours: 60,000 h, condition: ready for operation (used), Main Drive Cajdpfxexy Ti Nj Ab Tea Number of axis 4 Additional Equipment Hydraulic clamping Easy Form angle measuring system No tools required This 4-axis LVD PPEB 220/40 press brake was manufactured in 2005. It features hydraulic clamping and the Easy Form angle measuring system for enhanced precision. Ideal for those looking to enhance their metal forming capabilities. Contact us for more information about this machine. Application Types Bending

Year of construction: 2013, operating hours: 23,265 h, condition: ready for operation (used), Main Drive Laser power 5 kW Csdpfx Aboxy Tgzj Toaa Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. Caodpfsxywupjx Ab Tja The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system