Clean Mat Trucks B.V.

Condition: used, functionality: unexamined,

Year of construction: 1988, condition: used, Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment. Knodps Adt Eisfx Anuec

Year of construction: 1997, condition: used, Cutting speed copper/aluminum: 80m/min, structural steel/steel pipes: 65-85m/min, C45/comparable steels: 55-80m/min, C60/comparable steels: 55-65m/min, 34CrMo4: 40-60m/min, 42CrMo4: 40-55m/min, 10CrMo9-10: 30-50m/min, high-alloy steels: approx. 20-40m/min, connected load: 5kW, rated current: 16A, weight: 1.75t, an on-site inspection is possible. Knjdpfe Adt Epex Anuec

Condition: used, Pinpoint nozzle size: 40µm, min. bend radius: 65mm, cartridge capacity: 825ml, housing material: 316 stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating interface: Membrane keypad (membrane touch buttons), control system: Integrated control unit, printhead type: SureStart, relative humidity: 10-90%, power consumption: 200VA, dimensions: 245x475x725mm, weight: 36kg, an on-site inspection is possible. Kjdpfx Aj Adt Evenuenc

Condition: used, Max. lifting capacity: 500kg, rated current: 0.95A, connected load: 0.37kW, weight: 115kg, an on-site inspection is possible. Knedo Adt E Aspfx Anuoc

Condition: used, Working width: 1880mm, an on-site inspection is possible. Knedps Adt E Nofx Anusc

Year of construction: 2011, condition: used, Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement. Knedpe Adt Hasfx Anuec

Condition: used, Grinding spindle drive: 0.5HP, drive: Vibration-damped electric motor, power transmission: Endless woven flat belt, grinding carriage oscillation rate: 55 or 109 strokes/min, continuously adjustable oscillation stroke: 0-3⅛in, max. oscillation stroke: 79.375mm, pantograph ratio: 50:1, profile reduction: Factor 50, lateral clearance angle: ±10°, front clearance angle: 0-35°, an on-site inspection is possible. Kneds Adt Hgopfx Anuec

Year of construction: 1998, condition: used, Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible. Kjdpfx Ao Adt Hmjnujnc

Condition: used, Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible. Knedpfx Aj Adt Htsnusc

Year of construction: 1989, condition: used, Max. grinding length: 600mm, max. grinding width: 400mm, max. working height with new/worn grinding wheel: 550/650mm, max. workpiece weight: 300kg, clamping surface: 1020x300mm, number of T-slots: 1, T-slot width: 10mm, max. height above floor level: 1005mm, dimensions: 3140x2900x2140mm, weight: 2.9t, with electromagnetic chuck: 600x300mm and coolant system. An on-site inspection is possible. Kods Adt Hyspfx Anusnc

Condition: used, Year of construction: 2017, Airflow: 27,000m³/h, filter area: 215m², filter load: 126m³/m²/h, number of filter bags: 204, number of filter sections with 36 bags: 5, number of filter sections with 24 bags: 1, number of air injection sections: 1, chain speed: 3.9m/min, drive shaft speed: 5rpm, max. material throughput: 20m³/h, regeneration carriage travel speed: 6m/min, chain conveyor motor power: 0.55kW, chain speed: 3.9m/min, max. material throughput: 20m³/h, regeneration fan motor power: 4kW, regeneration carriage motor power: 0.37kW, regeneration carriage travel speed: 6m/min, length: 4500mm, width: 2700mm, height: 6615mm, weight: 4.4t, including documentation. An on-site inspection is possible. Knjdpfx Ae Adt H Henusc

Year of construction: 1978, condition: used, Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible. Ksdpfx Anj Adt H Teuenc

Condition: used, Year of construction: 2008, X-axis travel: 1016mm, Y-axis travel: 610mm, Z-axis travel: 760mm, distance from spindle nose to pallet: 150-910mm, distance from spindle axis to column: 635mm, distance from spindle axis to front of machine: 820mm, distance from table to floor: 959mm, working surface dimensions: 1270x590mm, number of T-slots: 5, T-slot width: 18mm, center T-slot dimensions: 18 H6 mm, centering bore diameter: 30 H6 mm, T-slot spacing: 125mm, max. table load: 1350kg, working feed rate: 0-15m/min, max. programmable feed rate: 40m/min, rapid traverse speed: 40m/min, acceleration: 5m/s², max. spindle speed: 10,000rpm, control system: HEIDENHAIN, length: 2750mm, width: 2120mm, height: 2100mm, weight: approx. 7.7t, operational hours counter: approx. 17,000h, including documentation. An on-site inspection is possible. Knjdj Adt Idopfx Anuoc

Year of construction: 1999, condition: used, Loading height: 850mm, basket dimensions: 670x480x300mm, max. batch weight: 150kg, exhaust air volume: 200m³/h, throughput: approx. 8-10 batches/h, rinsing temperature: 70-80°C, max. drying temperature: 130°C, number of immersion tanks: 2, power supply: 3x400V/50Hz, connected load: 58kW, system height: 2300mm, height of side structure: approx. 2200mm, left system section: approx. 1000mm, main system section: approx. 2800mm, right overhang: approx. 400mm, length: 3200-4200mm, width: 1800mm, height: 2300mm, operating hours: 43,294h, components: working chamber, immersion tank I, immersion tank II, oil separator, drying unit, filter. An on-site inspection is possible. Knjdpj Adt Ikefx Anuec

Condition: used, Year of construction: 2024, Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible. Kjdpfxs Adt Iqo Anuenc

Condition: excellent (used), Year of construction: 1998,

Condition: used, = Additional options and accessories = - 1 fuel tank - Day Cabin - Thick Axles = More information = General information Year of manufacture: May 1990 Year of construction: 1990 Operating hours: 66.819 Cab: day Drivetrain Type of fuel: Diesel Knedpfx Ane Adty Houoc Transmission Transmission: Automatic Axle configuration Tyre profile: 50% Front axle: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Measures Length: 12 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual appearance: average

Condition: used, mileage: 178,750 km, power: 120 kW (163.15 HP), first registration: 03/2019, fuel type: diesel, overall weight: 3,500 kg, tire size: 235/65 R16C, axle configuration: 4x2, wheelbase: 3,650 mm, next inspection (TÜV): 02/2027, color: orange, gearing type: mechanical, emission class: euro6d, suspension: steel, number of seats: 6, loading space volume: 2 m³, loading space length: 2,700 mm, loading space width: 2,020 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, airbag, central locking, seat heater, traction control, trailer coupling,

Condition: used, fuel type: diesel, fuel tank capacity: 65 l, lifting height: 6,000 mm, Year of construction: 2023 Operating hours: 2.066 Kedpe Adtxijfx Anujnc Empty weight: 5.490 kg Carrying capacity: 2.500 kg GVW: 7.990 kg Dimensions (LxBxH): 400 x 184 x 189 cm Availability: in stock

Condition: used, operating hours: 4,988 h, load capacity: 230 kg, fuel type: diesel, Equipment: all wheel drive, Year of construction: 2007 Empty weight: 8.090 kg GVW: 8.320 kg Ksdpfe Adtxcox Anusnc Dimensions (LxBxH): 577 x 230 x 237 cm Mast: articulated arm Working height: 1.765 cm Availability: in stock

Condition: ready for operation (used), functionality: fully functional, mileage: 89,000 km, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, electronic stability program (ESP),

Condition: excellent (used), Year of construction: 2016,

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A99965, overall weight: 93 kg, input voltage: 230 V, input current: 3 A, input frequency: 50 Hz,

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 07/2001, total length: 13,840 mm, total width: 2,550 mm, suspension: air, tire size: 425/65, tire condition: 30 %, wheelbase: 9,870 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles = More information = General information Year of construction: 2001 Registration number: OG-75-RX Axle configuration Tyre size: 425/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Knedpj Adtukjfx Anujc Rear axle 1: Max. axle load: 10000 kg; Steering; Tyre profile: 30% Rear axle 2: Max. axle load: 10000 kg; Steering Rear axle 3: Max. axle load: 10000 kg; Steering Weights Empty weight: 8.380 kg Carrying capacity: 39.620 kg GVW: 48.000 kg