Sollau CZ, s.r.o.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Csdpfx Aey I Nugekcerb Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: used, 2.5 t/h copper cable granulation line consisting of: 1. Two turbo mills, each 90 kW, plus one additional as spare, 2. Dry separation table MTB T1000XT1500, 3. 1 linear screen, 4. 2 wet separation tables, 5. Fans, cyclone, piping, and filter. This line can process unsorted copper cables with steel attachments, shredded copper from electric motors, and WEEE scrap < 15 mm. Production capacity is 2,500 kg per hour for copper cables. Available for inspection in Thiva, Greece. Crsdey Ibghspfx Akceb

Condition: used, Year of construction: 2014, operating hours: 17,000 h, overall weight: 52,500 kg, power: 328 kW (445.96 HP), With FABO Guarantee Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections. Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed. Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards. Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased. Technical Specifications: Model: Sandvik QI441 Serial Number: 1884BG14205 Credpey H Akxefx Akcob Operating Hours: 17,000 hours Capacity: 300 – 500 tons/hour Crusher Dimensions: 1380 x 800 mm Motor : CAT 328 kW Weight: 52,500 kg Year of Manufacture: 2014

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour Crjdoy H Aizspfx Akceb • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 220 kW (299.12 HP), TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: Credpfxey H Agge Akcjb • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 50,000 kg, power: 360 kW (489.46 HP), *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Crsdpfx Akey H Af Nscjb Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Credey E S S Aepfx Akcsb

Condition: used, Year of construction: 2015, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Crsdpfoy At Aksx Akcjb Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2014, operating hours: 200 h, functionality: fully functional, machine/vehicle number: FF1300, total height: 2,773 mm, total width: 1,730 mm, total length: 1,934 mm, overall weight: 1,580 kg, type of input current: three-phase, opening width: 1,500 mm, sieve perforation: 6 mm, input voltage: 380 V, number of blades: 16, rotational speed (min.): 28 rpm, extraction nozzle diameter: 140 mm, power: 22.5 kW (30.59 HP), noise level: 90 dB, USED ​​INDUSTRIAL POLYSTYRENE GRINDER YEAR 2014 - VERY LITTLE USE - MAXIMUM 200 HOURS DUE TO PRODUCTION DISCONTINUED PHOTOS FROM DELIVERY IN 2014 Cedpfx Ajyz Adhskcsrb WORKS PERFECTLY - NEED TO REQUIRE A FEW SCREWS ON THE PANEL DIMENSIONS: 1934 × 1730 × 2773 (height) mm WEIGHT: 1580 kg VOLTAGE: 380V / 50HZ / 3P MAIN MOTOR: 7.50 KW GRINDER MOTOR: 15.00 KW FEED OPENING: 1020×1500mm MAIN MOTOR SPEED: 28 RPM GRINDER SPEED: 1500 RPM OUTLET MATERIAL: 140 mm PRODUCTION: 100 - 180 KG/H PARTICULAR DIMENSIONS: 5-6 mm OVERLOAD PROTECTION + BEACON ELECTRONIC COMPONENTS: SCHNEIDER / MITSUBISHI / ABB ... SPARE PARTS (in addition to the blades already on the machine): 16 x NEW GRINDER BLADES (in addition to the one already on the machine) 1 x NEW SIEVE - 5MM (6mm sieve already on the machine)

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. Crjdpfoyw N Acsx Akceb All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: excellent (used), total power requirement 31,7 kW main drive 7,5 kW Input width 550 mm ca. 25/75 mm ventilator 22kW / 10.800 m³/h Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes. Cjdpfxjyvvtrj Akcorb The system consists of two infeed conveyor belts, the chipper and a transport fan.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet Cjdjyt Iawopfx Akcerb + 2 pairs of new shafts Machine is without gearbox.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,100 h, functionality: fully functional, overall weight: 50,500 kg, Sandvik QJ341 jaw crusher 2016 year 2100 hours on crusher 4700 hours on engine CAT C9.3 engine Inlet 1200x750 mm CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 50,5 tons Crodpfjyn Inkox Akcsb Fitted with side conveyor Fitted with overband magnet Machine in great working condition, ready for work like NEW

Condition: good (used), functionality: fully functional, Roll slitter type RGS50 – used Condition: good For splitting and crushing wound paper, cardboard, or plastic rolls on cardboard cores - Motor power: 15kW / dual pump 32A / 5-pole – 50Hz-3LNPE - Control: PLC-based, with two-hand safety control - Cutting force: 2x 25t - Blade length: 2500 mm - Max. opening: 1600 mm With roll support stand for increased working height and single-sided roll discharge – roll feed height approx. 1400 mm Crodpfsyn Aghex Akcob Factory inspection performed before delivery

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,500 kg, Product description: The ASCO Technology Jaw Crusher is a robust and compact jaw crusher designed for efficient size reduction of various materials. With its heavy-duty construction, wear-resistant 18% manganese cast jaw plates, and compact footprint, this machine is ideal for use in recycling and material processing applications. The crusher is easy to operate via an electrical control panel with emergency stop and motor thermostats, and it can be expanded with several optional features such as conveyors and a magnetic separator. A reliable solution for users looking for an efficient machine for pre-crushing and material preparation. Technical data • Jaw opening: 600 x 300 mm • Weight: 1,500 kg • Feed hopper: 1,300 x 800 mm • Discharge opening / setting range: 100 – 150 mm Csdpfx Aoymm Tiskcorb • Power: 15 – 35 kW Standard equipment • Standard upper feed hopper • Standard support frame • Jaw plates made of 18% manganese cast steel • Electrical control panel with emergency stop and motor thermostats Optional equipment • Motors with different voltages/frequencies (for non-EU countries) • Customizable feed hopper • Conveyor belt for input and output material • Magnetic separator Applications • Recycling of mineral materials • Construction and demolition waste processing • Pre-crushing for downstream processing steps • Stationary material processing lines

Condition: not inspected (used), Year of construction: 2008, functionality: limited functionality, Model/Type: Erdwich M480/3-1000 Serial No.: 1896 Year of construction: 2008 Cjdpjylhbfjfx Akcsrb Running Hours: unknown Warranty: Partially functional; no warranty or guarantee Availability: approx. 4-8 weeks after receipt of down payment Details: + Cutting unit, hopper, frame, and control unit + 3-shaft shredder + 2x 22 kW drive motors + Chip conveyor

Condition: used, Year of construction: 1993, output 18,5 kw number of blades 28 Crsdpfx Ajyk H Tqekceb Weight 1300 kg

Condition: used, Year of construction: 2011, operating hours: 15,000 h, functionality: limited functionality, total height: 10,000 mm, total width: 4,000 mm, total length: 8,000 mm, overall weight: 20,000 kg, rotor length: 2,000 mm, power: 2 kW (2.72 HP), Shredder included in a shredding line. 2 rotors with 8 standard knives each. 40 m³ containers housing the electrical cabinets and hydraulic motors. Spare cutting table. Cooler fully refurbished (was roof-mounted in our case). The hopper under the shredder may or may not be included in the offer. Cjdpfxeyinrrj Akcjrb

Condition: new, Year of construction: 2025, operating hours: 100 h, HAMMEL Metal Processing Plant consisting of: Cjdpfx Aeygl Apokcsrb HAMMEL Shredder Type VB 950 DK (Twin-Shaft Shredder) - Diesel engine CAT C18, approx. 780 HP - Mounted on crawler tracks - Shredding shafts (metal design) - Breaker bar with comb - Spiral fan HAMMEL Metal Screen Type SMA 150 E - Mounted on hooklift frame - Vibro finger screen - Permanent magnetic drum - Discharge conveyor FE - Discharge conveyor NE - Discharge conveyor for oversize material HAMMEL Eddy Current Separator Type MWA 1000 E - Mounted on hooklift - Vibratory chute - Discharge conveyor for aluminum - Discharge conveyor NE HAMMEL Sorting Conveyors Type MFB 800 E (3 units) - Mounted on hooklift - 4 sorting stations - 1 discharge conveyor with roof, railings, and walkways HAMMEL Return Conveyor - Transports oversize material back to the shredder Special offer: 30% discount Note: Video and images are examples.

Condition: new, Year of construction: 2026, Hydraulic motor for Chieftain 1400, Chieftain 1800 screenbox. We are polish distribiutor of David Brwon Hydreco, original genuine new pumps. All Powerscreen hydraulic motors in stock. Motor designed for Powerscreen Warrior 1400, Warrior 1800, Chieftaun 2100 with CAT engine and many more!! We can arrange worldwide shipping in very low price! We have also many more Hydreco pumps and motors in stock in stock. Hydraulic motors for crusher, hydraulic motor for screener, all brand, cheapest on the market. 07251123 M3C2208G5B25D Codpfx Ajygh Tqekcsrb

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Credpjydcmmofx Akcsb Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200

Condition: excellent (used), Year of construction: 2005, operating hours: 7,480 h, functionality: fully functional, overall weight: 33,500 kg, fuel type: diesel, Terex Pegson Trakpactor 428 on tracks 2005 year 7480 genuine working hours on John Deere CAT C9 33500 kg Inlet[mm]:up to 1067x711 mm Max size of inlet materiał: 400 mm CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 200 Feed hopper 3,68 m3 Fitted with overband magnet Cjdpfx Ajyazl Hjkcerb Side conveyor can be bought. Wear plates 90% blow bars martensitic-ceramic Machine in great working condition, can go straigt to work

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Credpex Tfdhefx Akcsb Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: used, Shredder, Erdwich M700/1-600, used machine Manufacturer: Erdwich Type: M700/1-600 Year: 2013 Power: 2 × 22 kW Overall dimensions: 1750 × 1820 × 1810 mm Cjdex I Dmwepfx Akcorb Weight: approx. 3,500 kg Hopper size: 650 × 580 mm × 2

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Cjdpfx Akox I Dc Escjrb Availability: lead time after order Price: €310,000 net