Tekno-Kouru Oy

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation Fedpeztwx Uefx Akvopk The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: excellent (used), Year of construction: 2018, Profiling machine Fpodpfxsztkw Ds Akvjk

Condition: used, Year of construction: 1996, type of input current: three-phase, sheet thickness (max.): 1 mm, total width: 2,000 mm, total length: 20,000 mm, total height: 1,900 mm, shaft diameter: 40 mm, input voltage: 380 V, working width: 300 mm, input current: 40 A, spindle motor power: 15 W, coil weight: 1,500 kg, overall weight: 10,000 kg, We are offering this used Dallan T4R-10-300 punching and profiling line / roll forming machine, manufactured in 1996. Manufacturer: DALLAN Type: T4R-10-300 Serial number: 964310.30 Year of manufacture: 1996 Machine specifications: Sheet width: max. 300 mm Sheet thickness: ± 0.5 – 1.5 mm Number of stations: 16 Number of cassettes: 5 Configuration: Double coil, rolling, punching module, roll forming line (16 stations), flying shear Roller diameter: 40 mm Punching unit: 8 punching units Coil: Double coil (rolls max. 1,500 kg) Current configuration: Omega profiles Dimensions: 20 x 2 x 1.9 meters Weight: ± 10,000 kg Fodpfx Aoztcgqekvjpk If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1993, A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible. Fsdpjzta Edofx Akvjpk

Condition: like new (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, rollform line for elevator rails production Fpjdezry R Djpfx Akvek

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fpsdpfozrt Ivsx Akvok Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes Fjdpfxszrnxcj Akvopk This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: excellent (used), We are offering a Schlebach RBM circular arc forming machine for pre-profiled blades, ready for immediate use. It is the “Porsche” among profiling machines. Delivery is possible. For more information, please send me a WhatsApp message or call me. Net price plus VAT. Fpjdpjzq R Hgefx Akvek An invoice with VAT shown is available.

Condition: excellent (used), We are selling a Schlebach EHA here. The machine is in perfect working order. Prices are net. Delivery is possible. You will receive an invoice with VAT shown separately. Fpedpfx Aezq R E Nokvsk

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE STEPS: N. 20 WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm Fjdpfx Ajzqwf Nokvepk NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. Fedpfszmzhmjx Akvepk We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0630, type of input current: three-phase, input voltage: 400 V, coil weight: 6,000 kg, overall weight: 12,000 kg, Machine available immediately. We are offering a new TR32 trapezoidal roll forming machine. The machine is new and ready for collection. Type: TR32 Year of Manufacture: 2026 Serial Number: 0630 Weight: 12,000 kg Maximum power: 12 kW Supply voltage: 3x400 V Supply frequency: (50–60) Hz THE MACHINE INCLUDES: - Electric decoiler with manual tension release, manually operated, capacity Q=6,000 kg; - Sheet metal feed with circular (rotary) knives - Profiling unit - Electromechanical guillotine - 6-meter sheet metal stacker + 6-meter transport cart - Control cabinet Fpodezl A I Sspfx Akvjk - Safety guards If you have any questions or require additional information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 7 mm, total width: 1,700 mm, total length: 31,000 mm, total height: 2,000 mm, input voltage: 400 V, working width: 1,250 mm, coil weight: 5,000 kg, overall weight: 8,800 kg, T20 Trapezoidal Sheet Roll Forming Line for Sale * Model: T20 Trapezoidal Sheet Roll Forming Line * Year of Manufacture: 2018 * 5-ton hydraulic decoiler included * Automatic stacker at the end of the production line The machine has seen very little use and is in excellent working condition. It has been well maintained and is fully operational. The production line is currently dismantled, making it ready for transport. Fedozhip Ijpfx Akvspk If you need any additional information, photos, or videos of the machine in operation, feel free to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 24 kW (32.63 HP), coil weight: 10,000 kg, overall weight: 12,000 kg, The machine is available for immediate delivery. We offer a new D23 sheet metal roofing profiling machine with a 3D shear. The machine is new and ready for pickup. Type: D23 Year of manufacture: 2026 Serial number: 2502242007 Fodpfx Akozfi Thjvopk Weight: 12,000 kg Maximum power: 24 kW Supply voltage: 3x400 V Supply frequency: (50÷60) Hz The machine consists of: Hydraulic unwinder, 10 tons + cross-over carriage, 10 tons; Sheet feeding system with rotary shears; Profiling section; Hydraulic press for embossing; 3D profiling shear for cutting; Sheet collector, 5 m + collection carriage; Control cabinet. If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1895, SWAH SLV-3 – Corner Insertion Machine A specialized, highly efficient pneumatic/electric machine designed for the automatic insertion and clamping of corner pieces into rectangular duct flanges (TDC/TDF/Slide-on profiles). Manufactured by the European specialist SWAH, the SLV-3 significantly speeds up the final assembly of rectangular ductwork while ensuring rigid, airtight joints. Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model / Typ: SLV-3 • Year of Manufacture: 2001 • Serial No.: 1895 • Application: Fast and automated press-fitting of metal corners into rectangular ventilation ducts. • Voltage: 400 V • Current: 1.1 A • Machine Weight: 96 kg Key Features & Components • High-Speed Assembly: Eliminates manual hammering, allowing the operator to lock ventilation corners into the profile in seconds with consistent, high-quality results. • Heavy-Duty Pressing Mechanism: Delivers a secure, tight seal between the duct profile and the corner piece without deforming the sheet metal or damaging the zinc coating. Fedpfxozbipvj Akvspk Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Fpedpfx Aoy Uzzfekvsk Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: new, Year of construction: 2026, functionality: fully functional, HawkTech LC-5005 – Pittsburgh Lock Machine for HVAC Duct Fabrication The LC-5005 forms the Pittsburgh lock seam on square and rectangular HVAC duct components. With 7 pairs of vertical forming shafts (each with left, middle, and right rolls), the profile is gradually formed, resulting in a clean and consistent seam. The upper section automatically adjusts to sheet thickness via a double-head stud and disc spring – no manual readjustment is needed during normal operation. Multiple lock profiles and combinations can be produced (Pittsburgh lock, drive cleat, and more). Compact and lightweight (360 kg) with a small footprint, the machine is easy to move, simple to adjust, and reliable – ideal for on-site duct fabrication as well as workshop use in industrial plants, hotels, and shopping centers. Technical data: Model: LC-5005 Motor power: 2.2 kW (Y100L1-4, three-phase) Voltage: 220 / 380 / 415 V (reversing switch QX1-13N1) Sheet thickness: 0.5 – 1.2 mm (drive cleat rolls: < 0.8 mm) Forming shafts: 7 pairs, 3 rolls each Dimensions (L × W × H): 1,520 × 630 × 1,010 mm Weight: 360 kg Scope of delivery: Fsdpfx Akoy Swnpjvspk LC-5005 Pittsburgh lock machine Set of Allen keys (5, 6, 8, 10, 12 mm) Operating manual (CZ/EN) Quality certificate

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm Fpedoy Rxzhspfx Akvsk FULL OVERHAUL

Condition: new, Fully automated machines for standing seam sheet metal profiling (CLICK), available in various sizes and designs. We offer several standing seam profiles. Delivery times and machine configurations are determined on a case-by-case basis for each order. Please contact us for additional information and technical documentation. Roll forming machine. Fjdpfx Aey Rkuyokvopk

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 6,4m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Fpjdjy Aafxspfx Akvjk

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Fsdpsyw Rzajfx Akvspk Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: new, Fully automated roof tile profiling machines available in various sizes and designs. Our range includes over 60 roof tile patterns. Delivery time and machine configuration are determined individually for each order. Please contact us for further information and technical documentation. Fedpfxjyu Sz Is Akvspk

Condition: ready for operation (used), Year of construction: 2007, A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible. Fjdpjyugm Eofx Akvjpk

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fjdpfx Akoyq Sx Esvjpk About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile Fjdjyqtx Hspfx Akvepk The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team