Promatt BV

Condition: used, - Bandsaw motor 5.5 kW - Cutting capacity 400 mm Rjdpjydux Ijfx Ahzjbt - Bandsaw blade dimensions 4570 x 41 x 1.3 mm - Year of manufacture 2003 - Feed length 570 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 2023, machine/vehicle number: 0102-260003, The HBE321A Dynamic automatic band saw from BEHRINGER is a precise metal band saw for industry and the steel trade. It offers low cutting deviations, vibration damping thanks to cast iron band guides and a servo feed system for precise saw feeds. The linear guide system ensures stability and precise cuts. The auto-feed control automatically adjusts the feed and cutting speed. An electrically driven chip brush and sensitive cutting pressure control increase the cutting performance. The automatic guide arm minimizes the adjustment effort. Modern drives reduce energy consumption by approx. 30%. A touch control enables simple operation and the double vice ensures process reliability. HBE321A Dynamic high-performance band sawing machine Technical specifications: Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat (W x H) 10 x 8 mm Band saw blade drive: Drive power 2.6 kW frequency-controlled Cutting speed 15 - 110 m/min (49 - 361 ft/min) Total drive power: approx. 7.6 kW (machine only without additional equipment) Voltage 400 V ± 10 %, 50 Hz with neutral conductor, control and valve voltage 24 V-DC Material feed length: 640 mm per stroke, maximum 5,760 mm Minimum cut-off length in automatic operation from 10 mm Minimum remaining piece length in automatic operation from 70 mm, in manual operation from 10 mm Saw feed: Regulated servo feed via ball screw spindle Material feed with ball screw Hydraulic material clamping Rbjdpfxoyc R Rqe Ahzot Hydraulic saw blade tensioning, electrically monitored Saw band cleaning with electrically driven chip brush with quick-change device, driven synchronously to the main drive. Coolant device with delivery rate 40 l/min at 2 m delivery height Coolant tank capacity approx. 70 l Length of the machine 1,850 mm, width of the machine 2,300 mm Height of the machine 2,400 mm with the hood open on the feed side, approx. 1,880 mm transport height Material support height 800 mm Base machine paint finish: light gray - RAL 7035, cover paint finish red-violet - RAL 4002 Cutting range 90° round 320 mm Cutting area 90° square 320 x 320 mm Cutting area 90° flat 350 x 320 mm Feed length single stroke 650 mm Drive power 2.6 kW Cutting speed 15 - 110 m/min Saw blade dimensions 4,440 x 34 x 1.1 mm Machine weight 1,900 kg

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: - Touchscreen control - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper Rbsdpeyc Hd Tofx Ahzjt - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Condition: used, Year of construction: 2008, miter ja Rodpoyacp Tofx Ahzebt cooling ja weight of the machine ca. 400 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0053003064, Fully operational, robust BIANCO 370 A machine (2007) – ready for immediate use. On-site testing available, complete nameplate data, quick collection possible. For sale: industrial BIANCO machine, model 370 A, year of manufacture 2007, serial number 0053003064. The unit comes from regular factory operation and was used as intended. The sale is due to an upgrade of the machinery fleet. The machine is in very good condition. It can be started and tested on site (under power) – the buyer can observe the machine in operation and assess its condition before purchase. Nameplate data Manufacturer / model: BIANCO 370 A Year of manufacture: 2007 Serial number (MATR.): 0053003064 Rbsdpjx Tfugefx Ahzet Power: 2.83 kW Supply voltage: 380/415 V, 50 Hz (current: 7.3 A) CE marking – compliant with machinery regulations solid construction and simple operation stable performance and repeatability easy maintenance and access to standard wear parts an excellent base for continued use in production or workshop environments

Condition: used, Year of construction: 1991, total height: 1,800 mm, total length: 2,000 mm, total width: 1,850 mm, Empty weight: 2.000 kg - Year: 1991 - Documentation available: No Rbjdpfex Srvhsx Ahzjt - CE certificate present: No - Serial number: 3115 - Drive system: Conventional - Saw type: Automatic - Horizontal/vertical: Horizontal - Round cutting capacity [mm]: 340 - Saw blade length [mm]: 4870 - Saw blade width [mm]: 32 - Max. feed length [mm]: 2000 - Saw speed [m/min]: 110 - Control: Conventional - Transport dimensions: 2000mm x 1850mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Bid now – Sale to the highest bidder. Lot 2910001: Comprises 1 used CNC double mitre saw in good condition. Shows signs of regular industrial use. Features: Product number: 335 DGA2020, Series: MEBAeco. Automatic double mitre saw with CNC control, cutting angles from 30° to 135°. Suitable for material types: round and rectangular profiles. Maximum cutting capacity: Ø 510 mm, 500×335 mm (flat). Cutting speed: 15–150 m/min, servo feed, minimum residual piece length: 80 mm. Saw drive: 3.0 kW, mechanical blade tensioning. Blade size: 4400×34×1.1 mm. Working height: 750 mm. Machine dimensions: 4350×2300×1900 mm, weight: 2550 kg. Control panel: SIMATIC OP27. Electrical system: 400 V, 50 Hz, 25 A, control voltage: 24 V. Protection rating: IP54. Manufacturer: MEBA Maschinenbau GmbH, Year of construction: 2002, Serial number: 6726. Redpfx Ahex N Nglszjbt

Condition: excellent (used), functionality: fully functional, saw band length: 4,160 mm, total height: 34 mm, BEKA-MAK 325 AUTOMATIC BAND SAW -TWIN-COLUMN DESIGN -330 MM SHAFT CUTTING DIAMETER -PACKAGE FEED ROLLER Redpfx Ajx Izx Rohzsbt -DIMENSIONS 330X400 -AUTOMATIC ROLLER FEEDER -COOLANT PUMP -INFINITELY VARIABLE BAND SPEED (inverter) 20>100 m/min -COMPLETE ORIGINAL DOCUMENTATION -BAND 4160X34X1.1 -MACHINE WEIGHT 960 KG Transport available at extra cost. -Net price for export. The machine is in excellent technical condition (like new), ready for work. Can be inspected in Głosków near Warsaw.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Parameters: Cutting diameter: 330 mm Cutting range (90° flat): 350 x 330 mm Saw band length: 4900×34×1.1 mm Cutting speed: 15–150 m/min (adjustable) Max. workpiece weight: 670 kg/m Total power requirement: 3.9 kW Table height: 750 mm Machine weight approx.: 2,600 kg Required space approx.: 1,700×2,400×2,200 mm Equipment: Laser line for cutting indication/marking Cutting process control Material monitoring Material database Feed force adjustment Zero stop Job menu Bundle cutting clamp Rbedpfox H Rynox Ahzjt Vertical roller Double-sided opening / reduced end scrap Operation and Comfort: Swiveling control panel LED work lighting Receiving table Water spray gun Chip and Coolant Management: Screw chip conveyor Micro-dosing Coolant level and flow control

Condition: used, Year of construction: 2022, cutting diameter 330 mm saw band length 4900 x 34 x 1,1 mm table height 750 mm capacity 90 degrees: flat 350 x 330 mm 15 - 150 m/min workpiece weight max. 670 kg/m kg 3,9 kW 2600 kg 1700 x 2400 x 2200 mm *Special equipment: - Screw chip conveyor - Zero stop - Material database - Clamping pressure regulation - Swiveling control panel - Job menu - Multi-bar clamping device - Cut control - Micro-dosing system - LED work light - Work table on the discharge side - Water spray gun - Coolant level and flow monitoring - Opening on both sides / shortened remnant piece - Material monitoring - Laser light for cutting line display/scoring saws Rbedpfjx E Dptox Ahzet - Vertical roller

Condition: like new (used), Year of construction: 2024, _____ Description: Year of manuf. : 2024 Working area Cutting area round :300 mm Cutting area square :300 x 300 mm Remaining piece length automatic operation :80 mm Rsdpfx Aox Ez Elohzebt Technical data Three-phase motor :2.2 kW Cutting speed :20 - 100 m/min, infinitely variable Feed length :600 mm Working height :850 mm Saw blade :mechanical Measurements Length :1,716 mm Width :3,055 mm Height :1,995 mm Weight :1,060 kg :

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 566-06124, Doall automatic bandsaw in good working condition. Rbjdox A S Agepfx Ahzst Cutting capacity round: 335 mm Year of manufacture: 2006

Condition: good (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system Rbjdpfx Aex A H T Hshzjt * Special accessories included: - 1x PEGAS chip conveyor

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60115, Offer 25422 Hydraulic Two-Column Guided Mitre Band Sawing Machine (Automatic) Technical Data: - Fully automatic cutting process with hydraulic lifting/lowering of the saw frame Redpfx Ajx Aqxaohzjbt - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorised mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 15 – 150 m/min - Stepless cutting pressure regulation: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting angle range: 30° – 90° - At 90° round: 335 mm - At 90° square/flat: 500 x 335 mm - At 45° round: 330 mm - At 45° square/upright: 320 x 335 mm - At 30° square/upright: 170 x 335 mm - Automatic material feed unit - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Space requirements approx.: W 2300 x H 1750 x D 2200 mm - Weight approx.: 1800 kg

Condition: used, Year of construction: 2010, 350 mm 350 mm Rbodpfsxxb A Ijx Ahzst

Condition: new, Year of construction: 2025, functionality: fully functional, High-Performance Automatic Bandsaw with Feed, Chip Conveyor, and Enclosure – For Precision Serial Cutting Are you looking for a powerful and reliable solution for precise and economical sawing in your production? Our automatic bandsaw with feed system, chip conveyor, and enclosure features state-of-the-art technology, delivers high cutting precision, and offers a range of smart automation functions – ideal for industrial use, metalworking, and serial production. Technical Highlights at a Glance: Cutting Capacity: Ø 325 mm or 380 x 325 mm Saw Blade: 4242 x 34 x 1.1 mm Saw Drive: 3.75 kW Weight: 2,200 kg Working Height: approx. 820 mm Power Connection: 400 V / 50 Hz Modern Control & Equipment: Rbodpexp I Raofx Ahzjt - Intuitive Smart NC control with 5.7" HMI touchscreen – programmable for up to 100 cutting programs - Powerful Mitsubishi PLC control - V-Drive frequency control – stepless cutting speed adjustment from 15–100 m/min - Digital display for feed rate, cutting performance & saw frame position - Material database for automatic parameter selection based on material type - Automatic initial cut function with freely programmable head cut length - LED signal light for machine status & LED work light - Hydraulic (adjustable) chip conveyor & coolant system with cleaning nozzle - Hydraulic blade tensioning with blade break monitoring - Vibration damping roller for smooth cutting surface - Automatic blade guide arm positioning - Material retraction after cutting to protect the saw blade - Slow-motion function for manual material positioning - Infeed-side material support (approx. 1,500 mm) & discharge table with coolant return (approx. 500 mm) Immediately available – Ready for demonstration in our showroom! The machine is connected and ready for demonstration at any time in our exhibition hall – see for yourself the quality and performance! No transport? No problem! Upon request, we will organize professional loading and secure transport directly to your location – fast, reliable, and hassle-free. 📞 Interested? Contact us today for a non-binding consultation or a live on-site demonstration!

Condition: new, For technical specifications, see the PDF file. Rbodpfexp H Rljx Ahzet

Condition: new, For technical specifications, see the PDF file. Rbedpfexp H Nnjx Ahzst

Condition: new, For technical specifications, see the PDF file. Rsdpexp H Idefx Ahzjbt

Condition: new, For technical specifications, see the PDF file. Rbjdpfjxp H H Hjx Ahzot

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Max. Capacity: Round: Ø 305 mm Square: 305 × 305 mm Rectangular: 305 × 400 mm Blade: Blade speed: 21, 39, 55, 68, 81 m/min Blade size: 3820 × 41 × 1.1 mm Motors: Blade motor: 3.7 kW Hydraulic motor: 0.2 kW Coolant pump: 0.1 kW OFFER – 29 October 2018 Rbedpfx Ahexm Rniezst The Pinnacle of Cutting Performance Weight: 800 kg Power supply: 380 V, 3-phase, 50 Hz Space required (L × W × H): 1,905 × 800 × 1,700 mm Working height: 740 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3500322132F, saw band length: 4,520 mm, saw band width: 1 mm, saw band speed: 1,666 mm/s, empty load weight: 1,200 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obliges you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Bandsaw length: 4,520 mm Bandsaw width: 1.1 mm Bandsaw height: 34 mm Bandsaw speed: 20 m/min – 100 m/min MACHINE DETAILS Roller conveyor length: 2,000 mm Roller conveyor width: 450 mm Dimensions & weight Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm Net weight: 1,200 kg EQUIPMENT Rsdpfjxm Rkqox Ahzobt Roller conveyor

Condition: used, Year of construction: 2012, cutting diameter 320 mm Rbedpfexf I Ukex Ahzot saw band length 3660 x 27 x 0,9 mm table height 320 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 320x320 mm cutting speed 15-105 m/min total power requirement 3,0 kW weight of the machine ca. 1250 KG kg dimensions of the machine ca. 2300x2500x2000 mm

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the Rbsdpfx Ajxfwbtehzet target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. Including band path detection (1800 EUR)

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees Rbedpfx Aoxab S Eshzet * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device