Frexboc Slu

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 27578701, turning length: 1,050 mm, turning diameter: 520 mm, spindle bore: 77 mm, rotational speed (max.): 5,000 rpm, controller model: Siemens Sinumerik, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter: 520 mm Max. turning diameter over cross slide: 440 mm Spindle bore: 77 mm Max. spindle speed: 5,000 rpm Drive power: 22 / 15 kW Torque: 672 / 168 Nm Tool interface: HSK 50 Tool stations: 96 TURRET Pgedpfx Ahjyfphgj Hsg Tool interface: VDI 40 Tool stations: 12 + 12 Driven tools: 12 MACHINE DETAILS Control: Siemens Sinumerik EQUIPMENT Chip conveyor Coolant system Filter system B-axis Swiveling counter spindle

Condition: ready for operation (used), Year of construction: 2019, operating hours: 7,774 h, functionality: fully functional, turning length: 452 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, swing diameter over bed slide: 700 mm, TECHNICAL DETAILS Turning diameter: 230/300 mm Turning length: 452 mm Maximum swing over bed: 700 mm Spindle bore: 65 mm Spindle speed: 4,500 rpm Spindle motor: 15/11 kW Max. spindle torque: 179 Nm Number of tools in turret: 12 BMT 55 Live stations: 12 BMT 55 Live tool speed: 5,000 rpm Milling spindle drive: 5.6/3.7 kW Y-axis: ±60 mm Sub-spindle power: 7.4/4.9 kW Sub-spindle speed: 6,000 rpm Rapid traverse: 36/36/10 m/min MACHINE DETAILS Control: Fanuc Dimensions (L x W x H): 3.9 x 1.65 x 2.0 m Pedpfx Asyfnc Noh Hegg Machine weight: approx. 4,700 kg Main spindle chuck diameter: 210 mm Sub-spindle chuck diameter: 125 mm EQUIPMENT Automatic tool measurement Q-Setter Chip conveyor Parts catcher with box 2 live tools BMT 55 Set of standard tools CNC turning center with live tooling, Y-axis, and sub-spindle.

Condition: not inspected (used), CNC lathe MONFORTS Type RNC 4 Ser. No. 133/72 CNC control, SIEMENS, SINUMERIK Chip conveyor and oil mist extraction Psdpfoyfnc Ajx Ah Hjgg

Condition: excellent (used), Year of construction: 2020, operating hours: 4,854 h, functionality: fully functional, machine/vehicle number: 0030000718A, spindle motor power: 16 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 540 mm, mount diameter: 200 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 36 m/min, operating hours of spindle: 851 h, spindle torque (max.): 168 Nm, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: documentation/manual, ONLY 851 spindle hours! We are a manufacturer of rubber molded parts and have our own toolmaking department, which we have recently scaled back to focus more on the design and development of tools. Pgsdoyfmihjpfx Ah Hog The lathe is in very good condition and has been regularly maintained. It was used in our in-house toolmaking mainly for machining mild steel. Due to low utilization, it is now offered for sale. The machine is currently in transport position and connected to power. A viewing can gladly be arranged. Including accessories: - Hainbuch chuck with part clamping up to 200mm diameter - LNS oil mist separator (retrofitted in 2021, approx. 8,000 CHF) - Various turning and milling holders - Table stand for turning and milling holders - Transport fixtures - Instructions, manuals

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, We offer you: Manufacturer: DMG Gildemeister Model: GMX 250 linear Year of manufacture: 2006 Control: Siemens 840 D powerline Technical Data: Max. turning diameter: 640 mm Turning length: 1,185 mm Draw tube inner diameter: 67 mm Travels: x1-axis: 550 mm y-axis: +/- 90 mm z1-axis: 1,185 mm b-axis: +/- 120° x2-axis: 180 mm z2-axis: 1,050 mm Main spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Counter spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Milling spindle: Speed range: 0 – 12,000 rpm Indexing: 1° Tool holder: HSK63A Number of tool pockets: 46 positions Turret: Number of tool holders: 12 positions Holder: 40 mm Hollow clamping device: Ø 67 mm Operating hours: approx. 92,100 h Spindle hours: approx. 47,800 h Technical features and accessories: - Main and counter spindles ISM 76 - C-axis and spindle brake, hydraulic - B-axis interpolating and with hydraulic clamping - Tool magazine with 4 additional loading stations - Absolute, direct measuring systems on all linear axes - Coolant tank 600 l with lifting pump and level regulator - Coolant filtration with belt filter, coolant pump 8 bar, 20 l/min - Chip conveyor - Preparation for work area extraction Pgodjyfmibspfx Ah Hog - USB and Ethernet interfaces - Tool monitoring system, manufacturer Artis, type CTM - Star turret with driven tools, including direct measuring systems - Counter spindle with partial hollow clamping device, C-axis and spindle brake (hydraulic), holding brake and direct measuring system - Automatic sliding safety door - Coolant spray gun - Electrical cabinet lighting and socket outlet - Signal lamp, 4 colors - Tailstock function for the counter spindle - 2x three-jaw power chucks, manufacturer Forkardt 30QLC 250-72 - Turret-mounted steady rest, range 8 – 101 mm Accessories, tools, and clamping devices shown only included if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: NTX 2000/1500 2nd Gen Year of manufacture: 2020 Control: Celos Fanuc F31iB5, Mapps 4 Technical Data: Maximum turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: X1 axis: 675 mm Y axis: ±150 mm Z1 axis: 1,562 + 164 mm B axis: ±120° A axis: 1,542 mm X2 axis: 200 mm Y2 axis: ±40 mm Z2 axis: 1,542 mm Main spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Pjdpfx Ahjyfl N Ts Hjgg Counter spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Milling spindle: Speed range: 0–12,000 rpm Drive power: 28/23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: No. of tool holders: 12 Speed of driven tools: 12,000 rpm Square tool shank length: 20 mm Boring bar shank diameter: Ø 32 mm Drive power: 5.5/5.5/3.7 kW Torque: 16.9/13.1/8 Nm Rapid traverse: X axis: 50 m/min Y axis: 40 m/min Z axis: 50 m/min A axis: 36 m/min X2 axis: 25 m/min Y2 axis: 18 m/min Z2 axis: 40 m/min B axis: 100 rpm Through-bore clamping device: Ø 67 mm Operating hours: approx. 15,050 h Spindle hours: approx. 4,210 h Technical features and accessories: - Kitagawa 8-inch through-bore chuck BB208A621 Ø 210 mm on main and counter spindle - Dual foot switch for spindle 1 and spindle 2 - Chuck cylinder stroke monitoring (linear position monitoring) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant: water-soluble coolant - Chip conveyor - Hydrajet MS30-1000/70 bar coolant system - Coolant chiller - Air blast device for chuck (spindle 2) - Interface for mist extractor - Manual tool presetting device installed on the machine (removable, spindle 1 and spindle 2) - Fully closed control loops for X, Y, and Z axes (tool spindle) - In-machine workpiece measuring system, Renishaw RMP600 - 4-color signal tower - Multi-dry filter - Voltage: 380 V, Frequency: 50 Hz - Alternating spindle speed - Prepared for 3D quickSET - Open pocket and island milling - High-speed fixed cycle - X-axis direction, JIS/ISO-compliant - 3D machine model - Transformer Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min Pgodpfxjyfh R Hs Ah Hsg z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h h spindle hours ca. 8. h h Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Technische Merkmale & Zubehör: - Kitagawa- Hohlspannfutter an Haupt- und Gegenspindel - Fußschalter (doppelt) für Spindel 1 und Spindel 2 - Vollindexierung der Werkzeugspindel - Revolver- Reitstockfunktion - Geeignete Kühlmittelart: Wasserlösliches Kühlmittel - Späneförderer - Kühlmittelsystem 70 bar, Fabr. Hydrajet - Blasluft an der Spindel 1 und Spindel 2 - Automatischer Messarm an der Hauptspindel - Werkstückauswurf an der Spindel - Teileentlader - Vorbereitung für Stangenlader - Schnittstelle für Nebelabscheider - 2 Stk. RotorClear - Signalleuchte 4 Farben - Multi-Dry-Filter - Automatisches Antasten und Werkzeugkorrektur - Speichererweiterung - Zyklus für Ebenentransformation - Kühlmittelspritzpistole Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Pgjdpfxsyfgymj Ah Heg Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2007, 3-Axis Vertical Machining Center MAZAK - NEXUS VCN 510 C-II CNC: MAZATROL MATRIX NEXUS Year: 2007 (8,300 spindle hours) Specifications: X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Rapid traverse: 36 m/min Table size: 1,300 x 550 mm Maximum table load: 1,200 kg Spindle speed: 12,000 rpm Spindle power: 18.5 kW Spindle taper: BT 40 Max. tool diameter: 80 mm Max. tool length: 350 mm Max. tool weight: 8 kg Approx. machine dimensions: 2,820 x 2,830 x H 2,840 mm Approx. weight: 6,700 kg Equipped with: - 30-tool magazine - Through-spindle coolant - Chip conveyor Podeyfgw Eopfx Ah Hogg - Tool probe

Condition: used, Year of construction: 2017, Mazak Variaxis I 600 Machining Centre with Mazatrol Smooth X Control, 120 Station ATC, CAT40 Tooling, Travel X = 510mm, Y + 910mm, Z = 510MM, A = 120deg, C = 120deg, Max rpm = 18000min, Swarf Conveyor, Absolent Filtermist. S/No. 283956 (09/2017) with Renishaw RMP600 Probe. Country of Origin: Japan Podoyfggmjpfx Ah Hogg Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2014, Mori Seiki NMV 3000 DCG 5 Axis CNC Milling Machine with Mori Seiki F31IAS CNC Control, 350mm Work Area/Bed, 120 Position ATC, BT40 Spindle Taper, Hydrajet WP10-1000 High Pressure Coolant System, ConSep Swarf Conveyor. S/No. V3010111005 (2014). Country of Origin: Switzerland Pgjdpfxeyfgbqj Ah Heg Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2008, Ma.-No. 204412, Control Mazatrol Matrix Nexus, travel X/Y/Z 260 x 150 x 1,605 mm, max. spindle speed 3,300 rpm, max. spindle bore 102 mm, max. turning diameter 420 mm, max. turning length 1,500 mm, 12-position tool turret with driven tool stations, tool holder VDI 50, max. speed 4,000 rpm, operating hours approx. 81,940, three-jaw chuck, hydraulic steady rest, make SMW Autoblok, tailstock, tool measuring system, chip conveyor, make Mayfran, type QTN300M, tool and accessory package. PCB defective! Pgodjyffxhjpfx Ah Hjg +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2011, Ma.-No. 327233239, control unit Mazatrol Matrix 2, travel paths X/Z 450 x 150 mm, main spindle, sub-spindle, 2x 8-position tool turrets with driven tool stations, tool holder VDI 40, 2 spindle units, max. spindle speed 5,000 rpm, max. machining length 530 mm, max. spindle bore 51 mm, tool measuring system, operating hours approx. 34,987, gantry loader, make Mazak, type Flex-GL100F, conveyor belt, L 6,000 mm, workpiece table, belt filter unit, make Knoll, type KF 400, chip conveyor, make CROMAR, tool and accessory package +++ Note: This machine is part of an online auction! +++ Pedpfx Ahsyffvtj Hjgg

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release Podpfxeyffgrs Ah Hegg • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki Lathe Model NZ2000T2Y Year 2008 3-phase Pgedpsyfd Unjfx Ah Hsg CNC Fanuc With tooling

Condition: excellent (used), Year of construction: 2012, CNC Turning and Milling Center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of manufacture: 2012 Program operating hours: approx. 20,000 h Pgodpjyfcrrofx Ah Heg OPTION GEAR CUTTING ENABLED Technical data: Main spindle speed: Drive power: 32 kW ISM 102 Counter spindle speed: Drive power: ISM 76 Y-axis on slide 1 Driven tools 1x12 on slide 1+2 Bar feeder package Workpiece pick-up gripper deployable on main and counter spindle Coolant system Chip conveyor Short bar feeder IRCO MUK

Condition: excellent (used), The machine is in very good condition and has low operating hours. Psdpfx Aheydvi Is Hogg

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t Pgodpfxeydvfco Ah Heg dimension machine xH: 3989 x 2375 x 3400 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 4,850 h, DMG Mori Ecoturn 510 V3 CNC Lathe In very good condition, year of manufacture 2016. Machine specifications: Maximum spindle speed: 3250 rpm Spindle bore: 103 mm Bar capacity: 76 mm Distance between centers: 1150 mm Swing diameter over bed: 680 mm Swing diameter over carriage: 465 mm Hydraulic chuck size: 250 mm Equipped with: VDI40 turret with 12 stations Chip conveyor High-pressure coolant system Pjdeydvcbspfx Ah Hegg Siemens control Hydraulic chuck Maximum machine dimensions including chip conveyor: 5320x1809x2161 mm (including signal lamp, excluding operator panel) Weight: approx. 6700 kg The machine is supplied with various holders, driven tools, turning tools, drills, and other accessories neatly stored in a tool cabinet. All manuals and electrical diagrams are also included.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 500 rpm, spindle bore: 79 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, chuck outer diameter: 200 mm, spindle nose: 170 h5, Equipment: documentation/manual, rotational speed infinitely variable, Machine is from first owner (government institution) and is very well equipped. This CTX 400 is set up at our premises and can be inspected in operation if required. This machine comes standard with: - Chip conveyor - IFM oil mist extraction system Podpfxoydpdxe Ah Hogg - TurnPlus control - Collet chuck for 185E and 3-jaw chuck KH 200/68 with top jaws - Conversion kit for collet 173E - Overload clutch for X and Z axes - Double foot pedal (chuck + tailstock) - Original Gildemeister and Heidenhain documentation - Approx. 20 VDI-30 tool holders, of which 2 are driven

Condition: good (used), Year of construction: 2000, Turning diameter 200 mm Turning length 400 mm Control: SIEMENS SINUMERIC Number of spindles: 2 Tool changer: 2x 14 Total power requirement: 39 kW Pgodpfoydm Tdsx Ah Hog Machine weight approx. 4,800 kg Without bar feeder, machine is integrated in automatic operation Machine is still powered. Videos of the machine's functionality are available and can be provided upon request.

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 190 mm, controller manufacturer: OKUMA, controller model: OSP-E100L, number of axes: 5, This 5-axis Okuma Macturn 350-W was manufactured in 2004. It features a turning diameter of 530 mm, TL of 1500 mm, and a main spindle with 80 mm diameter and 22 kW power. The machine includes a sub-spindle, 80 tools in ATC, and a B-axis with precise control. Ideal for complex turn-mill operations. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Macturn 350-W machine we have for sale. Contact us for more information. • C-axis: 0.001 deg • Through-spindle coolant • Live tooling speed: 6000 rpm • Sub-spindle speed: 6000 rpm • Coolant pressure: 15 bar • Helical cutting (Macturn) • Linear scales on X and A axes • Autotool changer (ATC) capacity: 80 tools • B-axis: 0.001 deg • Main spindle: 80 mm bore, A2-8 • Sub-spindle: big bore, 5000 rpm, 15 kW • Max turning diameter: 530 mm • Turning length (TL): 1500 mm Additional equipment • Robot interface (Robot IF) • Autodoor Pjdeydmfgopfx Ah Hogg • Mayfran chip conveyor, 1200 mm • Robot: ABB IRB6650, 200 kg / 2.75 m

Condition: used, Year of construction: 2001, Max Mueller MDW 20 (4) CNC Slant Bed Lathe With Siemens 840D Control Rohm Duro-NC 500/3 Ø500mm 3 Jaw Power Chuck. Maximum Turning Ø850mm. Maximum Swing Over Cross Slide Ø690mm. Maximum Turning Length 1,500mm. Centre Height 450mm. Maximum Workpiece Weight 800kg. Spindle Bore Ø128mm. Axis Travel 'X'=510mm, 'Z'=1,510mm. Rapid Traverse 'X'=10m/min, 'Z'=10m/min. Maximum Turning Speed 1,950rpm (60kW Motor). 30 Position Carousel. S/No. 504237 (2001). Pedpfx Ajydl Rbeh Hsgg With Renishaw LP2H Tool Setter, Chip Conveyor, Coolant System, Filtermist F28/8 Mist Extraction Unit, Powered Pneumatic Door, Foot Switches, Signal Tower & Manuals. Overall Dimensions L5,270 x W2,300 x H2,750mm. Weight 17,000kg. Note: Control Needs Attention, Tooling Shown In Photo's Not Included.

Condition: excellent (used), Year of construction: 1997, CNC Lathe Spinner TC67H-MC Year of manufacture: 2002 . Tailstock . Chip conveyor Pedpfeydlugox Ah Hegg . High-pressure pump . Chuck . Driven tools Technical specifications: Control: Siemens 840 D X-axis travel: 221 mm Z-axis travel: 590 mm Turning diameter: 300 mm Turning length: 600 mm Spindle speed: 4500 rpm

Condition: used, Year of construction: 2008, Saeilo Contur TSL 500, year of manufacture 2008, Siemens 810 D control with Shop Turn, traverse X/Z 270/905 mm, 12-position turret VDI 40, live tooling, C axis, tailstock, turning length 750 mm, max. turning diameter 400 mm, spindle speed up to 3,000 rpm, three-jaw chuck, protective window with damage, drive belt should be replaced, powered on and ready for demonstration in production. Pgodpfoydln Tox Ah Hsg