HEDELIUS Maschinenfabrik GmbH

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain, controller model: TNC640, table width: 860 mm, table length: 500 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 40, Equipment: chip conveyor, rotational speed infinitely variable, MTevo V76D Year of manufacture: 2023 2,500 spindle hours For sale due to project relocation Travel ranges: 760x510x510 mm Spindle speed up to 15,000 rpm SK40 tool holder 40 tool positions IKZ 20 bar strip-type filter system Compressed air supply through the spindle center Measuring probe: Heidenhain TS460 Tool breakage detection: Heidenhain TT460 Highlights: Iisdjy Tahhepfx Ag Ijb Heidenhain TNC640 Long zero-point plates, 96 mm grid - two 4-position plates LTA air filter unit Available immediately

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,155 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 500 mm, table length: 1,350 mm, table load: 550 kg, overall weight: 10,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis AXA DBZ vertical double machining centre was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load of approximately 550 kg. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. Iisdpfxsy Sg I Eo Ag Iob Double machining centerWith 2x 4th axis RTA 1-180Automatic doors (possible for robot handling system)Main spindle speed range 30–10,000 rpmMain spindle drive power ~30 kW (40% ED)Max. torque ~143 NmTool holder SK 40 DIN 69871 / AInternal coolant supply (water - air)Table clamping surface 2 x 1,350 x 500 mmMax. table load approx. 550 kgNumber of T-slots 3T-slot width 14H9 mmT-slot distance 160 mm4th axis 2 x RTA 1-180Number of tool positions 22 . tool diameter 85 mmMax. tool diameter with free adjacent pocket 135 mmMax. tool length 400 mmTool change time 4.0 secRapid traverse X/Y 25 m/minRapid traverse Z 20 m/minFeed force 9 kNTotal power requirement 55 kVAMachine weight approx. 10.0 tOperating hours: 65155 h Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Iijdpfx Aey R Rn Heg Ieb Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: new, functionality: fully functional, New joystick as a replacement for Hurco Ultimax 4 trackball. For sale is a new joystick suitable for Hurco CNC controls with Ultimax 4. The joystick replaces the original Hurco trackball and is an ideal modern, robust alternative if the trackball is defective or inaccurate. Installation is easy and can be completed within a few minutes. No special technical skills are required. An installation video guide is available online (search on YouTube: "HuStick4 - Joystick passend zu Hurco Ultimax 4"). Iedpfxjy N Eppj Ag Isib

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Iijdpfsy N A Ntex Ag Isb Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,236 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2011. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a table size of 914 x 356 mm and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 914 x 356 mm (36 x 14 in) • Rapids (X/Y/Z): 35.6 m/min (1,400 ipm) • Tool changer capacity: 24+1 • Coolant system: External Additional equipment • Table probe • Spindle probe Excluding Iiedpoy Nzq Ajfx Ag Isb • 4th axis (rotary), but machine is prepared for 4th and 5th axis Technical Specification Taper Size SK 40

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 13 m/min, rapid traverse Y-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 7,500 rpm, MIKRON VCE 750 VERTICAL MACHINING CENTER TRAVELS 760x500x400 mm SPINDLE ISO 40 AT 7,500 RPM 20-POSITION TOOL CHANGER PROGRAMMABLE WORKPIECE COOLING NOZZLE USER AND MAINTENANCE MANUALS AUGER FOR CHIP REMOVAL COOLANT TANK Iodey Nx E Dspfx Ag Ioib

Condition: used, Year of construction: 2001, BAZ Hurco VMX 40, year 2001 for sale in very good condition. Iedpfey Nlpcex Ag Isib

Condition: good (used), Year of construction: 2001, functionality: fully functional, Wemas VZ 750, Year of manufacture: 2001, Iiedpfx Agsy Ni H Se Iob Control system: Heidenhain TNC 426, Travel range X/Y/Z: 750/500/500 mm, Tool holder: SK 40, Tool changer: 20-position, 4th axis: Walter rotary table, Electric handwheel, 3D measuring probe.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. Iisdpfx Aey Ndklsg Isb • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,849 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details. • Axis movement: X/Y/Z, vertical orientation • Spindle/tool clamping: Mechanical clamping with coolant nozzles at spindle • Work table: T-slotted table • Electrical cabinet: HEIDENHAIN drive system; Siemens/Phoenix Contact modules; EPCOS filter • Machine features: Full enclosure; integrated work light; air and coolant lines Iiodpfxey Ncgxs Ag Isb Additional equipment • Workholding: Dual vises (manual/hydraulic) • Tooling: Assorted BT/SK tool holders on external rack • Extraction: External extraction ducting

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. • Table size: 1000 × 460 mm Technical Specification Iiedpfsy Nb Nxex Ag Ijb Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. Iiedpsy Naacofx Ag Ijb • Operating hours: 12,567 h Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,398 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 750 kg, overall weight: 4,800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30i was manufactured in 2017. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 15 kW, providing efficient machining capabilities. The machine includes a tool magazine with 24 positions and a robust table size of 1020 × 510 mm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30i vertical machining centre we have for sale. Contact us for further details. • Control: Hurco WinMax • Operating hours: 10,398 h • Table size: 1020 × 510 mm Technical Specification Isdpoy I Uyzefx Ag Ioib Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Iiedey Ifp Hjpfx Ag Ieb Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input • Additional 4th axis: Walter CDS 22 rotary table/indexing unit Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HAAS control (LCD screen, intuitive programming) Iedpfx Agjy Ifbcj Ijib Table size 914 x 356 mm Table load capacity 680 kgs X-axis travel 762 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 12000 rpm Rapid traverse X/Y/Z = 35,6 m/min Tool magazine 24+1 positions (arm type) Spindle power 22.4 kW Spindle taper SK40 Machine weight approx. 3 630 kg Dimensions (L x W x H): 2 500 x 2 400 x 2 600 mm Accessories, equipment - Electric MPG - Coolant system - Internal coolant supply - Chip auger - RENISHAW infrared tool measuring system with probe - 4th axis preparation - Power failure detection - Machine manuals - Machine mounts The machine is in very good condition and still powered on. It was purchased as a new machine in Hungary. It was used in clean and professional environment.

Condition: ready for operation (used), Year of construction: 2014, HAAS VF2 Year of manufacture: 2014 Isdpfxey Icw Is Ag Isib

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS Iisdjy Ib H Ijpfx Ag Ieb CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: good (used), Year of construction: 2005, Hurco VMX 64/40T Iiedpfxsy Ia Rls Ag Iob Year of manufacture: 2005 Control: Ultimax Travel: X-1630 mm, Y-860 mm, Z-760 mm Spindle speed: 10,000 rpm Spindle coolant Tool changer: 40 positions Chip conveyor

Condition: used, Year of construction: 2006, Vertical machining centre, Haas VF-5B/40HE, year 2006. Iiedpfoy Ia Iksx Ag Ijb

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, overall weight: 3,600 kg, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, For sale is a high-quality and reliable CNC machining center of the type Hommel Unverzagt UVA 25 PLUS. This machine stands out for its compact design combined with high stability, making it the ideal solution for workshops that value precision and German engineering. Manufacturer: Hommel Unverzagt GmbH Model: UVA 25 PLUS Machine type: Vertical machining center Weight: approx. 3,600 kg (according to nameplate) Year of manufacture: 2008 Tool holder: SK 40 or BT 40 Control: SINUMERIK 828D PPU 240.2 Includes active cooling unit: Daikin oil cooler Interfaces: Connections for Profinet (PN), Ethernet (LAN), USB, and RS232 port. Iijdpfx Aoy Htd Nog Isb X-axis: approx. 725 mm Y-axis: approx. 460 mm Z-axis: approx. 460 mm Table surface: 760 x 420 mm Machine dimensions: approx. 2,200 mm x 2,100 mm x 2,600 mm Footprint: 3,500 mm x 3,000 mm Transport and loading can be organized throughout Europe at extra cost, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 760 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 152 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis TOS Olomouc FV30 CNC A was manufactured in 2015. It features a spindle speed range of 50-6000 rpm and a tool changer with 12 positions. The machine has a maximum workpiece weight capacity of 360 kg and working strokes of 760 mm in the X-axis, 380 mm in the Y-axis, and 152 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the TOS Olomouc FV30 CNC A vertical machining centre we have for sale. Contact us for further details. Iiedpfxjy E N S Te Ag Isb • Tool changer: 12 positions • Linear measurement: Direct measurement on X and Y axes • Maximum workpiece weight: 360 kg • Manual console vertical adjustment: 450 mm • Worktable dimensions: Length 1300 mm, Width 305 mm Technical Specification Taper Size ISO 40

Condition: good (used), functionality: fully functional, travel distance X-axis: 820 mm, travel distance Z-axis: 275 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller model: SIEMENS SINUMERIK, workpiece height (max.): 750 mm, workpiece diameter (max.): 680 mm, spindle speed (max.): 3,500 rpm, Equipment: chip conveyor, For sale: universal CNC turning center (lathe) from Czech manufacturer KOVOSVIT MAS PRIM S80i. This is a robust machine designed for precise turning, drilling, and threading in single-piece and small series production. The PRIM version is equipped with driven tools (live tooling) and a C-axis, enabling complex machining in a single setup. Max spindle speed: up to 3500 rpm Turret: 12-station C-axis: Yes, allows turning and milling Control: Siemens Sinumerik 810D/840D Machine weight: approx. 6700 kg Key machine advantages: Versatility — Thanks to the C-axis and driven tools, it performs turning, milling, drilling, and threading in one setup. High repeatability — Suitable for precise parts made of steel, cast material, and stainless steels. Robustness — Heavy-duty construction and powerful spindle enable heavy milling and long-term operation. Usability — Ideal for workshops needing a single machine for a wide range of applications (from simple shafts to complex components with gears, holes, etc.). Isdpfxjy E Iikj Ag Isib

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-5070, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table width: 660 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Hurco VMX50 vertical machining center, year of manufacture 2006. Manufacturer: Hurco Model: VMX50 Year: 2006 CNC milling machine Hurco VMX 50 | YOM 2006 | SK40 | Chip conveyor | Spare parts For sale is a CNC machining center Hurco VMX 50 (year of manufacture 2006). The machine is well-maintained, in good condition, and immediately available—ideal for workshops, subcontractors, or training facilities. Technical Data Manufacturer: Hurco Model: VMX 50 Year: 2006 Control: Hurco Ultimax Travel (X/Y/Z): 1,270 / 660 / 610 mm Table size: 1,500 × 660 mm Table load: approx. 1,300 kg Spindle: SK40, up to 10,000 rpm (depending on version) Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Tool changer: 20 stations Coolant through spindle (IKZ) available Coolant system: yes Chip conveyor: yes Scope of delivery / Special features Including various spare parts LAN-enabled due to WR Box Chip conveyor included with the machine Iiodpfx Asy Exu Rsg Iob Inspection under power possible Collection only – loading can be arranged Price net plus VAT Location: 93073 Neutraubling Mobile: +49 160 97215567 If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MV0009-001573, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 33 kVA, overall weight: 5,000 kg, type of input current: three-phase, Doosan DNM 400 – Vertical Machining Center. CNC milling machine for precise metalworking. Suitable for drilling, milling, and tapping operations. Reliable and accurate, ideal for industrial use. Iiodpfxey Exg Hs Ag Iob