Super1Rent

Year of construction: 1997, condition: used, Stama MC325 106 Year of manufacture: 1997 Serial number: KMM3251165 Main spindle: SK40 Feed rate X-Y-Z axis: 1–10,000 mm/min Rapid traverse speed: X: 40,000 mm/min Y: 45,000 mm/min Z: 45,000 mm/min Tool magazine Max. tool diameter: 88 mm Max. tool diameter with free adjacent stations: 100 mm Max. tool length: 220 mm Max. tool weight: 10 kg Number of magazine stations: 36 Djdex Ey Ekjpfx Ab Tewf Times Span-to-span time: 2.8 s Workpiece change time on pendulum table: 2.8 s Connected load of entire system: 28 kVA Compressed air system Minimum supply pressure: 6 bar

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Maintenance and inspection hatches for wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Dwjdpfxex Exuqe Ab Tof Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2020, condition: good (used), machine/vehicle number: 054889, Aduna K100 2-Bath Cleaning System (Washing + Rinsing) incl. Vacuum Drying Including the following equipment: - Vacuum drying (Busch pump, rotary vane pump type RA) - Pressure flood spray function incl. quick-flooding - Spray function with 4-arm spray nozzles - Reinforced pump system 5.5 bar - Nozzle air purge to prevent cross-contamination of media Dwedpfsxz S Utsx Ab Tof - Impulse drying with thermal coupling - Chip filtration (bag filter) in media return - Automatic sliding door (vertical with viewing window) - Oil separator - Swath steam condenser, air-cooled - User-friendly, programmable control system - Timer, media level control (level regulation) - Automatic dosing unit - Cascading from tank-2 to tank-2 - Remote maintenance Automatic loading unit (buffer for 3 baskets in the loading area, 1 basket in front of the chamber, 3 baskets in the unloading area - 3-1-3) 8 Euro-standard baskets (dimensions: 670x480x400 mm) Max. load: 100 kg Connected load: 27 kW, 55 A For dimensions, see attached layout.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Dsdpfoxztt Dsx Ab Tewf Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Compressed air connection: max. 10 bar MACHINE DETAILS Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz

Year of construction: 2019, condition: used, machine/vehicle number: IntNr231388, Technical Description – PERO RO Industrial Solvent-Based Parts Cleaning System The PERO RO is a high-performance industrial parts cleaning system designed for the effective and environmentally friendly cleaning of workpieces and components using solvents. It is suitable for a wide range of applications within the metalworking industry and ensures high cleanliness standards while maintaining economic operation. Dsdpfsxxvrdsx Ab Tswf Features: • Cleaning with organic solvents (e.g. hydrocarbons or modified alcohols) • Closed-loop process with integrated solvent circulation • Suitable for small to medium batch sizes and varying component geometries • Automated process control for repeatable cleaning results • Robust construction for continuous industrial operation Typical Applications: • Degreasing of turned and milled parts • Cleaning before assembly or coating • Removal of coolants, oils, and particulates The machine can be inspected under power by prior arrangement. Specification and data subject to change and error, prior sale reserved!

Year of construction: 2017, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses Dwsdpfexvy Dxox Ab Tjf The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), VE-water circulation system for the treatment of rinsing baths Dedpfxoxvllnj Ab Tewf

Year of construction: 2007, condition: used, workpiece length 1400 mm Dwsdpfx Ajxukp Nob Tef workpiece height max. 1000 mm workpiece width - max. 1400 mm total power requirement 70 KVA weight of the machine ca. 2,5 t dimensions of the machine ca. 2,5 x 2,75 x 2,6 m

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Dodpfxjxr Eixj Ab Tjwf Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 15129, total length: 280 mm, total width: 163 mm, total height: 240 mm, input frequency: 50 Hz, input current: 39 A, heating capacity: 10.25 kW (13.94 HP), space requirement length: 300 mm, space requirement width: 290 mm, Equipment: documentation/manual, This DÜRR ECOCLEAN "EcoCBase C2" is available for sale. It is loaded via a small roller conveyor and Schäfer perforated crates. The roller conveyor is included. Over 50 of these crates are also available (at an additional cost). Additionally, there is a Euro pallet with various filters and oils for servicing. Dwedpfx Aboxryzvs Tof

Year of construction: 1995, condition: used, functionality: fully functional, Parts cleaning system still in operation, can be inspected on site. Lifting frame is not included in the sale. 1 basket is supplied with the machine. Commercial sale only; our terms and conditions apply. Dsdpfsxraptjx Ab Tjwf

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2-tank system Cleaning medium: modified alcohol Basket dimensions: L 530 x W 320 x H 200 mm Vacuum distillation Ultrasonic cleaning Vacuum drying Djdpfx Aexqyiwsb Tewf Batch weight: 50 kg

Condition: new, functionality: fully functional, Hydro Power 1200 is a professional pressure washer, made from high-quality stainless steel and designed for a wide range of applications. This washer is ideal for turbocharger regeneration and the cleaning of heavily soiled components made of steel, cast iron, aluminum, and other alloys. The cleaning process operates in a closed circuit, using MRS Cleaner Ultra Active washing fluid heated to 45 °C. The MRS Cleaner Ultra Active solution is delivered from a gun nozzle at up to 140 bar, ensuring thorough cleaning of hard-to-reach and heavily contaminated parts from carbon, grease, and oils. Both the temperature and the fluid itself enhance the washing efficiency. The washer is equipped with two filters and features adjustable leveling feet up to 20 cm. The washer lid is fitted with pneumatic struts for increased safety and work comfort. During cleaning, you can also use the installed flow-through brush or compressed air gun. The glass viewing window is equipped with cleaning nozzles to ensure clear visibility during operation. Additional features: - Thermally insulated tank – effectively protects the heated fluid from cooling too quickly. - Glass cleaning nozzles - Adjustable leveling feet - Oil separator – extends the lifespan of the washing fluid Optional accessories: - Rigid lance - Rotating table Technical data: Total width: 1,410 mm Total depth: 800 mm Min/max height (closed): 1,720/1,920 mm Min/max height (open): 2,380/2,580 mm Working width: 1,100 mm Working depth: 700 mm Working height: 620 mm Weight: 200 kg Working table load capacity: 200 kg Working fluid capacity: 120–150 L Temperature regulation: 0–45 ℃ Lance output: up to 12 l/min Pressure: 140 bar Voltage: 3~400 V Switch: foot-operated Dwjdpfx Asxnl Efob Tef WE ALSO OFFER OTHER HYDRO POWER PRESSURE WASHER MODELS IN SIZES 800, 1200, 1600, 2000. PLEASE CONTACT US FOR A QUOTE ON OTHER MODELS.

Year of construction: 2023, operating hours: 4 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10220, The hyCLEANER® red EVO I cleans different forms of façades, surfaces and materials: very gentle, effective, fast and above all, economic. The machine works with highpressure water and does not need any electrical connection. Both, the glass and the frames are cleaned simultaneously. All water leading elements are made out of stainless steel. Purified-water can be used and the glass surfaces dry up, leaving no streaks behind. A further advantage of hyCLEANER® red EVO I is the running wheels. They do not leave any marks on the surface of the façade - gentle cleaning can be so easy! Dwodpfx Aoxnlz Hjb Tsf

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) Dsdpjxnlpdsfx Ab Tjwf * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants Dedpfx Asxm Ulleb Towf - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. Djdpfsxm Szqex Ab Tswf After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, empty load weight: 320 kg, cage diameter: 790 mm, working height: 930 mm, machine/vehicle number: S2327, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates collection within the specified period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Rotary basket load capacity: max. 500 kg Compressed air connection: max. 6 bar Loading height: approx. 930 mm Usable basket diameter: approx. 790 mm Fluid volume (wash solution): 140 l Pump output (washing): 200 l/min Spray pressure (washing pump): 3 bar MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 15 A Connection power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 1,300 x 1,500 mm Dwsdpfx Aexm Riyob Tjf Weight: 320 kg

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Dodpfxsxiwc Sj Ab Tewf Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. Dodpfxexhcklj Ab Towf For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Year of construction: 1991, condition: used, Features: • Cylindrical, vacuum-tight vessel with flanged lid • Heating via heating floor or heating jacket (steam at 10 bar, max. 185 °C) Dwsdoxg Nakopfx Ab Tsf • Water-cooled stainless steel condenser • Rotating scraper agitator system to remove deposits and ensure heat transfer • Residue discharge valve (manually or pneumatically operated) • Sight glass and explosion-proof lamp for observation of the process

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For clean components in continuous operation Continuous-flow cleaning system made of stainless steel, equipped with an oil separator for uninterrupted material throughput. The workpieces are conveyed continuously—or in a clocked manner, if required—through successive treatment zones. Cleaning is performed as the parts pass through fixed nozzle systems. Suitable for parts with dimensions approx. 400 x 100 mm A wire link chain conveyor transports the components through the cleaning system, either lying flat or standing. • Surrounding nozzle frame – the offset nozzle arrangement enables thorough, all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle frames and nozzles can be adapted to suit the parts • Usable dimensions, load capacities, and pump performance can be customized The process steps are carried out in successive treatment zones: • Spray cleaning with sequential wet-treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volumes: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Pump, washing tank: 3.0 kW Pump, rinsing tank: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip pans for spill protection. These are included in the price and will be supplied with the machines. Dwodexcun Eopfx Ab Tof WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Year of construction: 2023, operating hours: 20 h, condition: used, functionality: fully functional, overall weight: 60 kg, input voltage: 220 V, laser power: 200 W, type of input current: AC, actuation type: electric, Technical Specifications: Laser: Pulsed laser Laser power: 200W Air-cooled Dimensions: 60cm x 28cm x 75cm (LxWxH) – Ideal for single-person transport! Sales price includes demonstration, training, and optional after-sales support - Immediately available - Warranty Private sale only, selling due to purchase of a new unit! NEW PRICE: EUR 31,500.00 net Negotiable: EUR 19,500.00 net! Financing available for up to 6 years! Dodpfexcf D Dex Ab Towf

Year of construction: 2023, operating hours: 473 h, condition: ready for operation (used), functionality: fully functional, load capacity: 150 kg, workpiece length (max.): 480 mm, workpiece width (max.): 670 mm, workpiece height (max.): 300 mm, machine/vehicle number: 500022, TECHNICAL DETAILS Basket dimensions: 670 mm x 480 mm x 300 mm Maximum load weight: 150 kg Loading height: 850 mm Cleaning Ultrasonic frequency: 25 kHz or 75 kHz Cleaning programs: 20 individually configurable Mechanism Type and speed of rotating movement: Freely adjustable Media Circuits Circuit 1: Spray cleaning, flood cleaning, pressure-flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 2: Spray cleaning, flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 3: Spray cleaning, flood cleaning, batch-flood cleaning, ultrasonic cleaning Drying: Compressed air pulse, hot air drying, hot air drying with humidity sensor, vacuum drying Dsdpfxjxamhlj Ab Tjwf Tank 1 Flow rate: 350 L/min Pump pressure: 3.5 bar Pump motor power: 5.5 kW Tank volume: 450 liters Tanks 2 & 3 Flow rate: 380 L/min Pump pressure: 2.5 bar Pump motor power: 3 kW Tank volume: 350 liters MACHINE DETAILS System weight: 2,400 kg Dimensions: 3,100 mm x 2,200 mm x 2,200 mm Process chamber and tanks: Stainless steel Electric tank heating: Freely adjustable temperature Control: SIMATIC F-CPU Operating hours: 473 h EQUIPMENT - Bypass filtration for all baths - Compressed air pulses - Spray device

Year of construction: 1990, condition: used, CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump. Dwedpfx Abew Uc Hbs Tef Additional title: one tank, heated CIP-Tank: 1500 l