Tov Nativ

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment Ljdjy T Rhxepfx Adwjhg - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations) Lodey T N Ahepfx Adwjhg

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg Lhedpfjy T Nu Dsx Adweg ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation – universal spindle – used planer, very good condition Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, Edge bander for 6 workpieces, "SCM" model SUPERSET XL V380/50 - "CE" USED - VERY WELL MAINTAINED, STILL IN OPERATION [ID: cvn-088] - 6 workpieces: BOTTOM/RIGHT/LEFT with CNC/TOP/BOTTOM/UNIVERSAL - Working width: 230 mm - Tandem device for short pieces - Variable speed drive - COMPLETE WITH CUTTERS Lhodpfx Adey T Ndlowsg Available subject to prior sale.

Condition: good (used), Year of construction: 2003, Consist of : 4 x 6000 mm cross chain conveyers, mounted on floor 1 x TRANSLYFT lifting table, twin sissor model, 4000 x 1000 mm, max lifting capacity : 4000 Kg 4 x chain conveyers, 1000 mm, mounted on top of lifting table 1 x THOMAS PETTERSSON TP600 vacuum infeed device, mex width between vacuum suction cups : 4000 mm, ( can lift 6000 mm items. 1 x THOMAS PETTERSSON Electric cabinet 1 x driven band conveyer, 8000 mm Ledpfx Aoy Tzi Tedwehg

Condition: used, Year of construction: 2001, Number of boring spindles 8 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 36 m/min. Control Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15" in 2021. The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Lhjdpfx Aey Ty H Dedwjg Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock / 4,000 - 12,000 rpm All spindles: CNC controlled (except spindle 6

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2904-3140, Four-sided planer with 8 cutters. Processing speed of 8-25 m/min. Planing width 200 mm, height 140 mm. 1 horizontal spindle. 2, 3, and 4 vertical spindles. 5, 6, and 7 horizontal spindles, 8 universal spindles. 40 mm shafts, 230 mm heads. Lhodpfx Adey Tynhewjg 1 motor 7.5 kW, 2nd motor 5.5 kW, 3rd motor 7.5 kW, 4th motor 4 kW, 5th motor 11 kW, 6th motor 11 kW, 7th motor 5.5 kW, 8th motor 5.5 kW. 4 kW gear motor.

Condition: excellent (used), functionality: fully functional, SCM Superset XL Four-Sided Planer Lhsdpfxjy Ttryo Adwjg Working width: 15–230 mm Working height: 6–120 mm Number of spindles: 5 Spindle arrangement: Bottom Right Left Top Bottom Spindle speed: 6,000 rpm Pneumatic pressure rollers Feed speed adjustable via variator: 5–25 m/min Driven by cardan shafts CE certificate

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts Lodpfxsy Ti R Ee Adwohg - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW Lhedpfx Ajy S R Agsdwog 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Year of construction: 2002, 5 stations + 1 milling unit Digital positioning Table lubrication Ledpjy S Rkqefx Adwshg Air cushions in the table Capacity: 230 mm / 120 mm Total power: 43 kW 380 V Equipped with 4 helical tool holders with inserts Machine documentation and service keys Machine overhauled and available in stock

Condition: not inspected (used), functionality: unexamined, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Lhsdpfsy S E Spjx Adwog Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Comes with tooling.

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Lhedpfjy S Acxsx Adwog

Condition: excellent (used), functionality: fully functional, SCM Superset XL four-sided planer Working width: 15-230 mm Working height: 6-120 mm Number of spindles: 6 Spindle configuration: Bottom Right Lsdpfx Aoy Sr Nnedwohg Left Top Bottom Universal / glazing bead saw unit Spindle speed: 6000 rpm Pneumatic pressure rollers Feed speed adjustable via inverter: 5-25 m/min Drive via cardan shafts CE certificate

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ----- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ----- > Spindle 1: Bottom > Spindle 2: Right (pneumatically actuated: up/down) > Spindle 3: Left > Spindle 4: Top > Spindle 5: Bottom > Spindle 6: Glazing bead saw (pneumatically actuated: up/down) Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glazing bead saw (2.2 kW, 6000 rpm, 40 mm diameter) Additional Features Lodpfx Adsy Spvrewohg ----- > Glazing bead separation feature (or usable as a grooving unit) > ATS Control (automatic) 2-axis positioning for width and height (left and top spindles) with program memory (99 programs) > Machine operation: Window package Joint control of the right spindle and the glazing bead outfeed via manual selector switch on the control panel > Spindles with mechanical digital displays ----- Price of the above-mentioned machine upon request! ----- Option: Used planer heads ----- (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Lodpsy Spvfjfx Adwjhg Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-Piece Wood Sanding Machi...

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Ledpfx Aoy Spu Uedwehg Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm Lodpfx Adey Sny Aowshg - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1990, functionality: fully functional, working width: 250 mm, planing height: 125 mm, spindle diameter: 35 mm, GUILLIET four-sided planer with 250 mm table width, reinforced motors, long table Lodpfjy Sk Ayjx Adwehg

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer Lodpfey Sgzxex Adwehg No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: good (used), Weinig Hydromat H23 8 spindle Lsdpfx Asy Sgy Uedwehg 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, spindle speed (min.): 7,000 rpm, Weinig Powermat 700 6 spindles 260 mm wide 160 mm high 40 mm spindles 7.000 rpm Feed speed 5-40 m/min Bottom 11.0 KW Right + left motor joint motor 11.0 KW Top 11.0 KW Top 7.5 KW Bottom 7.5 KW Radial CNC controlled adjustment and positioning left + top spindles Marathon coating for machine tables and fences (excl. infeed table) Lsdpfx Adjy R U Siowjhg 2.5 Meter infeed table Memory Plus operating system

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Lhjdpsy Rzkfsfx Adwjg Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6765 TECHNICAL DATA Lhedpfx Aoy Rzgyodwjg - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm Number of spindles: 4: 1) Horizontal lower: 230mm, 5.5kW 2) Vertical right: 160mm, 5.5kW 3) Vertical left: 160mm – electrically adjustable left/right from the control panel, 5.5kW 4) Horizontal upper: 230mm – electrically adjustable up/down from the control panel, 7.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm Top: - 6 toothed feed rollers, including 2 double rollers - 2 rubber feed rollers Bottom: - Toothed feed roller, metal, torsion-resistant, in the lower bed + - Smooth metal feed roller - Rollers are pneumatically adjustable - Length of the feed bed (with pneumatic feeder): 3390mm - Can be operated without engaging the pneumatic feeder; the bed is adjustable up/down - Central lubrication - Electric adjustment of planing thickness - Smooth adjustment of feed speed - Feed on Cardan shafts - Feed motor: 4kW - Enclosed in a cabinet - Diameter of dust extraction port: 4x120mm - Dimensions (L/W/H): 7000x1950x1700mm, weight approximately 3000kg - For wet and dry wood - Pneumatic feeder on the feed table - Used planer, very good condition Net price: 83,900 PLN Net price: 19,980 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm Ljdpfx Ajy Rzf Nsdwjhg - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)