Trimexin Kft

Condition: like new (used), Year of construction: 2023, operating hours: 1,900 h, clamping force: 1,600 kN, screw diameter: 105 mm, clearance between the columns: 18,701,420 mm, displacement volume: 4,546 cm³, total length: 13 mm, total width: 4 mm, total height: 3 mm, overall weight: 83 kg, pressure: 1,778 bar, 8 hot runner channels 16 sequential pneumatic valves 2 air blowers SERVO PUMP PC MC6 WEIGHT 83T Blodpfx Asy I Apqsk Esg DISTANCE BETWEEN PLATENS 3400MM

Condition: used, Year of construction: 2012, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm Blsdjy I Anmepfx Ak Esg • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Year of manufacture: 1999 Bljdjy I Am Nepfx Ak Esg Voltage: 3x400 V Serial number: 077099

Condition: excellent (used), Year of construction: 2012, Technical Data 300-P Blodpfxoy I Am Aj Ak Eeg Year of manufacture: 2012 Suction port: 300 mm Rated motor power: 7.5 kW / 3 phase Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Nominal air flow: 5,089 m³/h Vacuum: 2,280 Pa Filter surface: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Pneumatic cleaning Extinguishing container Location: Ex stock Bitburg Subject to prior sale

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 5, This 5-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. Bedpsy I Amvjfx Ak Ejlg • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment • Extraction System: Donaldson Torit DCE • Chip Conveyor: Mayfran

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/1990, loading space length: 6,650 mm, loading space width: 2,450 mm, loading space height: 1,970 mm, total length: 9,450 mm, total width: 2,500 mm, total height: 3,280 mm, suspension: steel, tire size: 275/70 R22.5, wheelbase: 4,870 mm, color: other, Year of construction: 1990, Structure Volume: 32 m3 = More information = Axle configuration Tyre size: 275/70 R22.5 Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Bsdpfoy I Ampex Ak Eolg Rear axle 2: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Rear axle 3: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.270 kg Carrying capacity: 19.730 kg GVW: 28.000 kg Functional Tipper: Back Maintenance, history and condition APK (MOT): tested until 05/2027 Technical condition: very good Visual appearance: very good Identification Registration number: WD-16-VG = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), functionality: fully functional, mileage: 523,598 km, power: 375 kW (509.86 HP), first registration: 11/2019, fuel type: diesel, empty load weight: 9,956 kg, maximum load weight: 16,044 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, EBS, air conditioning, cruise control, differential lock, full service history, lane keeping assist, navigation system, retarder, Mercedes Benz Actros 2551/BDF/6x2/Retarder/Angel Mirror/Euro 6D/MP4 • Manufacturer: Mercedes Benz • Model: Actros 2551 • Mileage: 523,598 km • First registration: 11/2019 • Power: 375 kW / 509 hp • Axle configuration: 6x2 • Wheelbase: 4.60 meters • Angel Mirror • Retarder • Air conditioning • Refrigerator • Navigation system • Adaptive cruise control • Long-distance cab • Differential lock • Lane keeping assistant • Auxiliary heater • Trailer coupling • Cruise control • ESP • ABS • EBS • Transmission: automatic • Unladen weight: 9,956 kg • Payload: 16,044 kg • Permissible total weight: 26,000 kg • TÜV valid until: Nov. 2026 Bljdpey I Alljfx Ak Esg • Emission standard: Euro 6D • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to prior sale. - Subject to intermediate sale, - Errors and/or typographical mistakes excepted. - Sale in accordance with our terms and conditions.

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i Bedpfey I Ak Isx Ak Eslg U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: excellent (used), Year of construction: 2016, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg Blodpfx Ajy I Aknok Esg -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Condition: used, mileage: 875,371 km, power: 331 kW (450.03 HP), first registration: 05/2017, fuel type: diesel, tire size: 385/65, tire condition: 20 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,960 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, electric window regulation, parking heater, power mirror, second fuel tank, = Additional options and accessories = - Radio CD player = More information = Technical information Number of cylinders: 6 Engine capacity: 12.742 cc Front axle: Tyre size: 385/65; Max. axle load: 7100 kg; Tyre profile: 20% Rear axle: Tyre size: 315/70; Max. axle load: 11500 kg; Tyre profile: 30% Weights Empty weight: 8.205 kg Carrying capacity: 10.395 kg GVW: 18.600 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Bjdpfxsy I Ah Hj Ak Eslg Identification Registration number: 03-BJL-8

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 7,325 h, load capacity: 1,400 kg, lifting height: 3,950 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, battery capacity: 630 Ah, battery voltage: 48 V, Equipment: sideshift, Type: Linde E14 Load capacity: 1400 kg Operating hours: 7320 Year of manufacture: 2002 Overall height: 1950 mm Lift height: 3950 mm Free lift: 1400 mm Battery: 48 V 500 Ah Charger: 48 V 80 A Special features: Full free lift Attachments: Sideshift Optional: new safety inspection (UVV) Sale exclusively to commercial customers, excluding any warranty or guarantee. Blodpfxsy I Ahte Ak Ejg Errors in input, changes, and prior sale are reserved. All prices plus statutory VAT. Transport, for an additional charge via our partner shipping company, is possible throughout Europe upon receipt of payment. If this machine does not meet your requirements, we can offer you more than 1,000 other machines through our dealer network. Should you have any questions, I am at your disposal at any time. The machine can be inspected by appointment. Best regards, Nils Leyers

Condition: excellent (used), mileage: 170,083 km, power: 184 kW (250.17 HP), first registration: 08/2011, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,780 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, total length: 8,690 mm, total width: 2,550 mm, total height: 3,600 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 10,000 kg, loading space length: 6,580 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, Technical information Engine capacity: 6.871 cc Axle configuration Tyre size: 285/70R19.5 Front axle: Max. axle load: 5600 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes Rear axle: Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.030 kg Carrying capacity: 6.970 kg GVW: 15.000 kg Functional Tail lift: DHOLLANDIA DHLM.20, tail lift, 2000 kg Height of cargo floor: 107 cm Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: BY264546 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Air Suspension Seats - Radio/Cd/Audio system - Roof spoiler - Twin wheel axle - Visor = Remarks = VIDEO: MAN TGM 15.250 GVW 15,000kg / 250 hp Euro 5 Beverage truck / Open cargo bed with tarpaulin Tarpaulin is pneumatically operated LBW Dhollandia Tail lift 2000 kg 170,000 km Verifiable Internal dimensions: L. 658 cm / W. 250 cm / H. 245 cm Blsdoy I Afxopfx Ak Esg Technically and visually in very good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,893 h, load capacity: 1,000 kg, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, construction height: 2,340 mm, battery manufacturer: SBS, battery capacity: 500 Ah, remaining battery capacity: 95 %, battery voltage: 24 V, Type: Toyota 7FBEST10 Load capacity: 1,000 kg Operating hours: 8,893 Year of manufacture: 2014 Overall height: 2,340 mm Lift height: 3,700 mm Blodpjy I Afrjfx Ak Ejg Battery: 24 V 500 Ah, Year 10/2024 Charger: 24 V 60 A Special features: 3rd and 4th hydraulic valve routed up to the mast Optional: new safety inspection (UVV) Sale only to commercial customers. Warranty and liability are fully excluded. Errors in input, changes, and prior sale reserved. All prices are exclusive of statutory VAT. Transport can be organized throughout Europe by our partner forwarding company for an additional charge, following receipt of payment. If this machine does not meet your requirements, we can offer you over 1,000 other machines from our dealer network. If you have any questions, please feel free to contact me at any time. The machine can be inspected upon prior arrangement. Best regards, Nils Leyers

Condition: excellent (used), mileage: 170,083 km, power: 184 kW (250.17 HP), first registration: 08/2011, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,780 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, total length: 8,690 mm, total width: 2,550 mm, total height: 3,600 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 10,000 kg, loading space length: 6,580 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, Technical information Engine capacity: 6.871 cc Axle configuration Tyre size: 285/70R19.5 Front axle: Max. axle load: 5600 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes Rear axle: Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.030 kg Carrying capacity: 6.970 kg GVW: 15.000 kg Functional Tail lift: DHOLLANDIA DHLM.20, tail lift, 2000 kg Height of cargo floor: 107 cm Condition Technical condition: very good Visual appearance: very good Damages: none Bedpfx Aoy I Affok Ejlg Identification Registration number: 264546 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Air Suspension Seats - Radio/Cd/Audio system - Roof spoiler - Twin wheel axle - Visor = Remarks = VIDEO: MAN TGM 15.250 GVW 15,000kg / 250 hp Euro 5 Beverage truck / Open cargo bed with tarpaulin Tarpaulin is pneumatically operated LBW Dhollandia Tail lift 2000 kg 170,000 km Verifiable Internal dimensions: L. 658 cm / W. 250 cm / H. 245 cm Technically and visually in very good condition

Condition: used, mileage: 253,239 km, power: 78 kW (106.05 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,587 kg, maximum load weight: 913 kg, overall weight: 3,500 kg, wheelbase: 3,950 mm, next inspection (TÜV): 04/2028, fuel: diesel, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, maximum speed: 160 km/h, Equipment: ABS, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, retractable fork, sliding door, soot filter, trailer coupling, truck registration, * German vehicle, 2nd owner * Vehicle Identification Number: ZCFC3571605930596 * Safety inspection (HU) valid until Differential emits noise! However, the vehicle is fully operational. Special equipment: * Trailer socket pre-installation * Exterior mirrors electrically adjustable and heated * Roof shelf with additional DIN compartment * Remote central locking key * Cruise control * Rear doors (opening angle 260°/270°) * Fuel tank: 90 liters * Fog lights with static cornering light * Spare wheel holder between longitudinal chassis rails * Reversing camera * Load/Passenger compartment panelling: high-density hardboard * Central locking with remote control Standard equipment: * Driver airbag * Rear-wheel drive * S-Series version * Brake assist * Ceiling light in loading area * Electronic Stability Program (ESP) Bljdpfx Aksy I Ad Uo Esg * Rear suspension: parabolic spring * Front suspension: transverse leaf spring * Electric windows * Tinted windshield and side windows * Alternator 120 A * 6-speed manual gearbox * Bodywork/type: Jumbo box van, standard * Cargo compartment partition wall * Headlamp leveling system * Engine: 2.3L - 78 kW Diesel, catalytic converter * Radio pre-installation with speakers * Wheelbase: 3950 mm * Tire repair kit * Low-emission compliant with Euro 5 standard * H4 headlamps * Sliding door, right, in cargo/passenger compartment * Power steering * Cabin seating: dual passenger bench with headrests * Daytime running lights * Immobilizer * Permissible gross weight: 3.5 t Nationwide delivery available! Trade-in possible! Leasing and financing available even with no down payment. Errors, misprints, and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 1,750 mm, total width: 4,600 mm, table load: 1,100 kg, overall weight: 6,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, product length (max.): 3,800 mm, number of axes: 3, This 3-axis Hurco VMX 42 vertical machining centre was manufactured in 2004. It features a table clamping surface of 1270 x 610 mm and travels of 1060 mm in the X-axis and 610 mm in both Y and Z axes. The machine has a maximum table load of 1100 kg and a spindle speed range of 10 - 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 machine we have for sale. Contact us for further details. • Table clamping surface: 1270 x 610 mm • Spindle power: 7.5 kW (100% ED), 15.0 kW (30% ED) • Spindle torque: 238 Nm at 625 rpm (30% ED) • Programmable feed rate: 3.0 – 7600 mm/min • Adjustable feed rate: 3.0 – 11,400 mm/min • Rapid traverse X/Y/Z: 30 / 30 / 20 m/min • Pull stud: DIN ISO 7388/11 Type B • Max tool diameter (full/adjacent empty): 80 mm / 160 mm Bedsy I Ad Iepfx Ak Eelg • Max tool length: 300 mm • Tool change time (chip-to-chip): max 14 s • Tool changer: Automatic, 24 stations • Control: Ultimax 4 with dual screens (text and graphics) • Software: Conversational and ISO-code programming • Hardware: Pentium technology, 1.6 GB hard drive, 64 MB RAM • Electrical connection: 38 kVA, 400 V, 42 A • Compressed air: 6 bar / 0.3 ccm/min • Condition: Z-axis drive malfunction Additional equipment • Coolant system • Coolant wash gun • Chip flushing system • Chip enclosure • Chip conveyor • Signal light • Machine light • Machine feet Technical Specification Taper Size SK 40

Year of construction: 1973, condition: ready for operation (used), An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible. Bjdpfx Akoy I Adzo Eelg

Year of construction: 1970, condition: ready for operation (used), A Borden beading machine for metal can production is available. Can diameter range: 211mm/603mm, can height range: 300mm-700mm. Documentation available. An on-site inspection is possible. Bsdpsy I Aduofx Ak Eolg

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Bodpsy I Adnsfx Ak Eelg

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Blodey I Adhjpfx Ak Esg

Year of construction: 1982, condition: ready for operation (used), General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible. Blsdpfx Akjy I Adbe Eeg

Year of construction: 2014, condition: ready for operation (used), A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible. Blodpfoy I Ac Rex Ak Eeg

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Bsdpfoy I Ac Djx Ak Eolg

Year of construction: 1985, condition: ready for operation (used), A continuous cabinet press Pritelli is available. Press length: approx. 2500mm, press height: approx. 1300mm, press depth: approx. 680mm, pressure shoes vertical horizontal: 2/3, rated power: 7kW. Machine dimensions X/Y/Z: approx. 7000mm/2400mm/2950mm, weight: approx. 2800kg. An on-site inspection is possible. Bjdpfoy I Acwox Ak Eslg

Condition: ready for operation (used), Year of construction: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350blisters/min, max. blister dimensions X/Y/Z: 90mm/145mm/12mm, max. carton dimensions X/Y/Z: 100mm/155mm/105mm. Line dimensions X/Y/Z: approx. 7100mm/1300mm/2250mm. Documentation available. An on-site inspection is possible. A package sale is preferred. Expected to be available from October 2026. Bljdpfx Akjy I Acqe Eog