Kamiteka MB

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed nesting/programming software is included. The exact software name (believed to be Dr. ABE), version and licence transferability are being checked. A transferable software licence is not confirmed. Machine nameplate: serial number 125; weight 9,500 kg. Itodpfsz Tdc Sex Ahbjn The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg Itedoz S Nmmjpfx Ahbsn FEATURES CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: ready for operation (used), Year of construction: 2016, laser power: 2,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, table load: 920 kg, number of axes: 3, This 3-axis AMADA LCG 3015 AJ fiber laser cutting machine was manufactured in 2016. It features a maximum continuous laser power of 2,000 Watts and an impressive X-axis travel of 3,070 mm. The machine includes an automatic palletizing system and a lightweight HS cutting head with advanced safety measures. If you are looking to get high-quality cutting capabilities, consider the AMADA LCG 3015 AJ machine we have for sale. Contact us for further details. • CNC control: AMADA AMNC-F with 15" touchscreen, 1 MB memory • Control features: Auto-diagnostic system, laser power feedback control, USB/Ethernet ports, CD drive, LAN interface, cutting data library database, part/sheet counting, logical search function, production time measurement • Max material thickness: • Mild steel (ST 1203): 10 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 8 mm • Copper: 4 mm • Brass: 5 mm • Cutting speed: 0–120 m/min Ijdez S Nfcspfx Ahbstn • Machine weight (with interchangeable table): 8,200 kg • Cutting head: Lightweight HS head with capacitive sensor for constant distance, rapid-change lens/nozzle system, 5 protective safety measures • NC focusing function: Automatic focus adjustment via CNC and optics for varying materials/thicknesses • Positioning diode laser: Assists in approaching positions and working with residual sheets/trimmings Additional equipment • Pallet changer: Automatic palletizing system with pneumatic thin-sheet clamping and roller table for easy positioning • Extraction and chiller: Multi-chamber extraction with self-cleaning filters; closed-loop cooling unit for laser, focusing mirror, lens, and drives

Condition: ready for operation (used), Year of construction: 2012, laser power: 5,000,000 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 was manufactured in 2012. It features a powerful 5 kW laser and a working area of 3000 x 1500 mm, making it suitable for various cutting applications. The machine is equipped with a Siemens control unit and an efficient LiftMaster Compact automation system. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 3030 CO2 laser cutting machine we have for sale. Contact us for further details. Itsdpfx Ahez Sprvjben

Condition: used, Year of construction: 2019, For sale: Bystronic ByStar Fiber 3015 high-performance fiber laser cutting machine equipped with a powerful 12 kW fiber laser source and automatic ByLoader 3015 loading system. Designed for high-speed, high-precision sheet metal processing with excellent productivity and automation. Available : 2026 The machine can be inspected under power and demonstrated in operation by appointment. Technical Specifications Manufacturer: Bystronic Model: ByStar Fiber 3015 Laser Type: Fiber Laser Cutting hours : 14.324h Laser Power: 12 kW (adjustable from 1.2 to 12 kW) Sheet Size: 3,000 × 1,500 mm Working Area (X × Y × Z): 3,100 × 1,580 × 100 mm Maximum Positioning Speed: 120 m/min (X/Y), 170 m/min simultaneous Positioning Repeatability: ±0.025 mm Maximum Workpiece Weight: 1,100 kg Isdpfx Ahjz Sd Imsbotn Shuttle Table Changeover Time: 25 seconds Average Power Consumption: Approx. 27 kW (including extraction and chiller) Options BeamShaper Power cut Parameter wizard Maximum Cutting Capacities Mild Steel: up to 25 mm (up to 30 mm with BeamShaper option) Stainless Steel: up to 30 mm Aluminium: up to 30 mm Brass: up to 15 mm Copper: up to 12 mm Maximum cutting capacities may vary depending on material quality and machine condition. ByLoader 3015 Automatic Loading System Sheet size: 3,000 × 1,500 mm Sheet thickness: 0.8 – 25 mm Maximum sheet weight: 890 kg Enables automated loading and increased production efficiency Dimensions & Weight Machine Dimensions (L × W × H): Approx. 11,900 × 5,700 × 3,200 mm Machine Weight: Approx. 11,000 kg (excluding extraction system and conveyor) Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Bystronic Model: ByStar Fiber 3015 Laser Type: Fiber Laser Sheet Size: 3,000 × 1,500 mm Positioning Repeatability: ±0.025 mm Cutting hours: 14.324h Available: 2026

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Itedpfx Aez R D Dqshbon Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning Isdpfx Ajz Rl Taohbetn TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,500 W, travel distance X-axis: 3,420 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis AMADA FOL 3015 NT was manufactured in 2006. It features an impressive X-axis travel of 3420 mm, Y-axis travel of 1550 mm, and Z-axis travel of 200 mm. The machine is equipped with a powerful 4500 W laser source and includes a side pallet loading system, FANUC AF4500E CNC control, and an industrial extraction system. If you are looking to get high-quality laser cutting capabilities, consider the AMADA FOL 3015 NT machine we have for sale. Contact us for further details. • Laser source: FANUC AF-4500E • CNC control: FANUC AF4500E Itjdpfx Aez Ix R Sjhbon Additional equipment • Side pallet loading system • HYFRA PEDIA SVK 540 cooling unit (chiller) • DONALDSON TORIT DCE DF8 industrial extraction system (fume extractor)

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions Isdpfxez Itl Ds Ahbetn - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Operating hours approx. 76,000 - Cutting hours approx. 28,000 - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting edge quality - Package for cutting gas supply & cutting quality

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, Maximum laser power: 6 kW Cutting area: 3,060 x 1,530 mm Ijdpfjz Iqb Asx Ahbstn Positioning accuracy: 0.03 mm Maximum travel speed: 115 m/min Maximum acceleration: 0.8 G

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, laser type: fiber laser, laser hours: 200 h, laser power: 12 W, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 16 mm, Equipment: CE marking, cooling unit, documentation/manual, fume extraction, safety light barrier, Laser source power: 12 kW Maximum sheet size: 3000 x 1500 mm Maximum sheet thickness (carbon steel): 35 mm Maximum sheet thickness (stainless steel): 30 mm Maximum sheet thickness (aluminum): 25 mm Maximum sheet thickness (brass): 16 mm Itodpfjz H Nybex Ahben Machine components: voltage stabilizer, 12000W laser resonator, light curtain safety barrier, compressor, extraction system. The machine can be viewed and tested in Komárno, Slovakia.

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 fiber laser cutting machine – manufactured in 2019 – used Bodor P3 3D? / fiber laser cutting system – manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm Ijdpfjz Egzgsx Ahbjtn * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning and a generous working area. An interesting machine for sheet metal processing, metalworking, job production and industrial manufacturing. Used machine – inspection possible by appointment. Transport, dismantling and loading can be organized upon request. Dismantling, transport and loading can be organized throughout Europe for an additional charge, if desired. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Isdpfxsz D Th Dj Ahbjtn Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Iedez D D N Eopfx Ahbotn Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: Sinumerik 840, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 145 mm, overall weight: 11,500 kg, total width: 4,600 mm, total height: 2,000 mm, product length (max.): 9,300 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L3030 was manufactured in 2002. It features a powerful 3,200 W CO₂ laser, with a working area of 3,000 x 1,500 mm and a maximum workpiece weight of 710 kg. The machine is equipped with Siemens Sinumerik 840D CNC control, ensuring precision in cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L3030 CO₂ laser cutting machine we have for sale. Contact us for further details. • Maximum workpiece weight: 710 kg • Maximum mild steel thickness: 20 mm • Maximum stainless steel thickness: 12 mm • Maximum aluminium thickness: 8–10 mm Itedpfxjz D Dm Rs Ahbjn • Positioning speed (X/Y): 60 m/min • Simultaneous positioning speed: 85 m/min • Wavelength: 10.6 μm • Compressed air connection: 6 bar • Nitrogen connection: 30 bar • Oxygen connection: 20 bar • Electrical connection: approx. 73 kVA • Power supply: 400 V / 50 Hz Additional equipment • Pallet changing system: Yes

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 19,732 h, control type: PLC-controlled, laser type: fiber laser, laser source manufacturer: IPG, laser source model: IPG, laser hours: 19,732 h, laser power: 6,000 W, table length: 3,000 mm, table width: 1,500 mm, overall weight: 18,000 kg, total length: 3,000 mm, total width: 1,500 mm, The subject of this offer is a fully functional, used Eagle iNspire 1530 laser cutting machine with a power of 6 kW. The machine is equipped with the following technological options: Production Kit – a set of consumable parts specifically selected for the laser series and power, which is necessary for a smooth start to production. This kit is sufficient for the first few weeks of operation without the risk of running out of any parts. Thanks to this, the customer can gain experience without the risk of making a wrong decision regarding the stocking of consumable parts in their warehouse. MyEDROP – designed for operations involving the placement of parts on the material inside the machine. Itsdpfx Ahjz Did Isbsn

Condition: used, Year of construction: 2018, x-axis 3060 mm y-axis 1530 mm z-axis 160 mm workpiece weight 200 kg/m² traversing speed 100 m/min weight 12000 kg dimensions of the machine ca. 10150 x 4050 x 2420 mm Combination laser, consisting of a flatbed laser and a tube laser Flatbed laser: Work table (mm) 3048 x 1524 Max. simultaneous speed (m/min) 141 Positioning accuracy (mm): 0.05 Repeatability (mm): 0.05 Laser power (kW): 3 Max. material thickness, carbon steel (mm): 16 Ijdpoz A Hz Usfx Ahbjtn Max. material thickness, stainless steel (mm): 8 Max. material thickness, aluminum (mm): 8 Configuration: - SIEMENS 840 D sl control system - Auto-Focus cutting head - IPG 3 kW laser source - Automatic shuttle table - Automatic verification of sheet size and position - Start position can be set using a laser diode - Automatic nozzle cleaning - Central lubrication Tube laser: Tube diameter: 25â??400 mm Tube length: 3000 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Ijdsz Ay Rrepfx Ahbjtn Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,200 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 12,000 kg, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 (3.2 kW) was manufactured in 2014. It features a substantial travel range of 3000 mm on the X-axis and 1500 mm on the Y-axis, making it suitable for various cutting applications. The machine includes a TRUMPF LoadMaster automated sheet loading system for enhanced efficiency. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details. Itjdpsz Atu Defx Ahbon - Working Hours: 38,200 h- Frequency: 50 Hz- Voltage: 400 V- Current Type: 3~- Maintenance: Serviced by Trumpf TruServices- Automation / Handling: TRUMPF LoadMaster automated sheet loading system included- Optional Equipment: Pallet changer / shuttle table system

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Friendess (BOCHU), controller model: CypCut, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 12 kW Fiber Laser Source, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 16 mm, sheet thickness copper (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 80 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 80 mm, feed rate X-axis: 168 m/min, feed rate Y-axis: 168 m/min, feed rate Z-axis: 30 m/min, cutting speed: 80,000 mm/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,000 kg, total length: 8,445 mm, total width: 2,945 mm, total height: 2,318 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, 12 kW CNC FIBER LASER CUTTING MACHINE WITH EXCHANGE TABLE – MTP F3015DH The MTP F3015DH 12 kW is a modern, fully enclosed industrial fiber laser cutting machine designed for fast, precise and efficient sheet metal processing. Equipped with a powerful 12,000 W Raycus fiber laser source, automatic exchange table and advanced CypCut CNC control, the machine is suitable for both continuous series production and flexible contract manufacturing. RAYCUS 12 kW FIBER LASER The high-performance Raycus 12 kW laser source provides excellent cutting performance across a wide range of materials, including carbon steel, stainless steel, aluminium, brass and copper. Fiber technology offers high energy efficiency, excellent beam quality and low maintenance requirements. AUTOMATIC EXCHANGE TABLE The machine features an automatic dual exchange table, significantly reducing downtime. While cutting takes place on one table, material can be unloaded and the next sheet prepared on the second table. Working area: 3000 × 1500 mm CYPCUT CNC CONTROL The machine is controlled by the industry-proven CypCut system, offering intuitive operation and comprehensive control of the cutting process. CypNest nesting software enables efficient arrangement of parts on the sheet, helping to reduce material waste and production costs. HIGH-SPEED PRECISION DRIVE The F3015DH combines Leadshine EtherCAT servo drives, precision linear guideways and LEADRACK gear racks for fast, accurate and repeatable positioning. Maximum X/Y traverse speed: 168 m/min Positioning accuracy: ±0.03 mm Z-axis travel: 80 mm Continuous operation capability: 24 h FULLY ENCLOSED DESIGN Itsdpfx Aoz Aiwzehbjn The enclosed working area improves operator safety and helps contain fumes, dust and laser radiation. An integrated extraction and filtration system automatically removes contaminants generated during cutting. Cameras allow convenient monitoring of the cutting process from the operator station. PROFESSIONAL INDUSTRIAL EQUIPMENT The machine includes: Raycus 12 kW fiber laser source Automatic dual exchange table CypCut CNC control CypNest nesting software Leadshine EtherCAT servo drives Precision linear guideways LEADRACK gear racks CWFL industrial water cooling system Extraction and filtration system Camera monitoring system Dual operator displays Independent electrical cabinet with Schneider components Temperature monitoring system Low-pressure alarm Voltage stabilizer Consumables starter kit: nozzles, protective lenses and ceramic rings The pneumatic system supports cutting with nitrogen, oxygen or compressed air, allowing cutting parameters to be adapted to different materials and applications. The MTP F3015DH 12 kW is an excellent solution for sheet-metal processing companies, steel construction manufacturers, machine builders, automotive suppliers and professional laser-cutting service providers. New machine – year 2026. European and international transport can be arranged. Technical support, spare parts and after-sales service are available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Iedsz Ahrwjpfx Ahbstn Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Itodpfszz Shyex Ahben Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Ijdjzz A A Ijpfx Ahbotn Inspection while the system is running is welcome.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Ijdpfx Aszzyl Hjhbetn Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets Itjdpfx Ajzzw Irohben