Peter Mager

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,628 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 1,600 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Load center: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Lodsxqib Aspfx Afijah Front tire type: Super elastic Rear tire type: Super elastic Battery voltage: 48V Battery capacity: 930Ah Battery year: 2025 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders available at our Hamburg and Gdansk warehouses. Please visit our website - sago-online. Leasing and financing options on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this CBE2500. P.S.: Our master forklift workshop specializes in repair, servicing, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale at our facility. Sideshift, fork positioner, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 11,693 h, load capacity: 6,000 kg, lifting height: 5,700 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 3,380 mm, fork length: 1,400 mm, empty load weight: 11,150 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,250 mm, Sideloader Load centre: 700 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Description: In addition to this Baumann model, we have about 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing under attractive terms are always available. We are also happy to purchase your used vehicles directly, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will gladly provide detailed advice on this GX60L/14/75TR. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment and custom builds for forklifts from 8 tons upwards. We are also happy to accept your vehicle for sale on consignment. Heater, full cab, full free lift, Lsdpsxqibvofx Afisah

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 18000 kg Main Drive Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Lsdpfx Afoxqibpoijah Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 Swivel Units for Clamping Bridge 2 NC-Controlled Swivel Units 4 NC-Controlled Rotary Tables KNOLL Coolant System 70 Bar High-Pressure Pump Chip Conveyor This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 3350 mm Measurements height 2160 mm Machine weight 1800 kg This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine. Application Types Sawing Laodpfoxqibijx Afioh

Year of construction: 2000, condition: ready for operation (used), This COMAU Manni Italpannelli Complete Production Line was manufactured in 2000. It features two lines for producing insulated sandwich panels, one for flat and another for curved roof panels. Each line includes presses, foaming systems, and handling robots. Capable of producing panels up to 12 meters long and 200 mm thick. Currently requires maintenance for full reactivation. Contact us for more information about this machine. Application Types Laedpfsxqibcjx Afioh Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2016, This 4-axis DMG MORI DMP 70 was manufactured in 2016. It features a high-speed 24,000 rpm spindle, a large tool plate, and a Renishaw probe, complemented by an efficient extraction system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMP 70 machine we have for sale. Contact us for more information about this machine. Laedsxqia Sspfx Afish Application Types Milling

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 900 kg Main Drive Spindle motor power 85 kW This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine. Laodpjxqia Ejfx Afioh Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2003, operating hours: 63,400 h, General Data Measurements width 3000 mm Lasdpfx Afoxqiaxjijh Measurements depth 4800 mm Measurements height 4000 mm Machine weight 20000 kg Main Drive Spindle speed range 30-10000 Number of axis 4 Table Number of tslots 7 Table load 1500 kg Tools Max weight 8 kg Max tool diameter 85/135 mm This 4-axis AXA VPC-40-U vertical machining centre was manufactured in 2003. It features a robust 30 kW AC hollow shaft motor with a speed range of 30-10,000 rpm and a spindle torque of 143 Nm. The machine includes a 36-pocket chain magazine with a rapid tool change time of approximately 6 seconds. Consider the opportunity to buy this AXA VPC-40-U vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Lsdpfx Ajxqiarefisah Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2015, operating hours: 5,000 h, condition: ready for operation (used), General Data Machine weight 1800kg Main Drive Spindle speed range 2500 This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. Application Types Turning Lodpfxsxqialj Afioah

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,311 h, General Data Measurements width 18000 mm Measurements depth 7000 mm Measurements height 2500 mm Ledpfx Afoxqiafeijah Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 3000 kN This SUMITOMO SHI DEMAG El-Exis SP 300/720-920 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 45 mm, a clamping force of 3,000 kN, and tiebar spacing of 720 mm. With 62,311 operating hours and 50,971,553 cycles, consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 300/720-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 10000 Movement X-Axis Rapid Traverse 20000 mm/min Y-Axis Rapid Traverse 20000 mm/min Z-Axis Rapid Traverse 20000 mm/min Table Number of tslots 5 Table load 10000 kg Lsdpfx Afoxqh U Usieah Tools Type of tool holder SK 50 This 3-axis BUCK TBFZ 1600 drilling machine was manufactured in 2003. It features a robust table size of 1500x1500 mm, capable of handling loads up to 10,000 kg. The spindle supports SK 50 tool shanks and operates with a motor power of 30 kW, achieving speeds up to 10,000 rpm. Ideal for heavy-duty drilling, this machine offers a comprehensive range of motion with X, Y, Z, and W axes travel paths and a B-axis rotary table. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2017, operating hours: 42,177 h, General Data Measurements width 2300 mm Measurements depth 9700 mm Measurements height 290 mm Machine weight 4052 kg Injection Unit Screw diameter 70 mm Laodoxqh U Iopfx Afijh Clamping Unit Clamping force 5800 kN This SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, clamping force of 5,800 kN, and tiebar spacing of 1,020 mm. With 42,177 operating hours and 48,627,617 cycles, it's a proven performer. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, operating hours: 62,073 h, General Data Measurements width 2200 mm Measurements depth 8500 mm Measurements height 2800 mm Machine weight 2759 kg Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 4500 kN This SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 70 mm, a clamping force of 4,500 kN, and tiebar spacing of 920 mm. Despite its extensive use, it remains operational but requires attention due to a knee lever issue. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Laedpfxjxqh Uzo Afioh Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Ledjxqh Uuopfx Afioah Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,917 h, Control Unit Brand SIEMENS Laedexqh Unepfx Afijh Model SINUMERIK 828D Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Table load 800 kg Tools Type of tool holder BT40 This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2007, condition: ready for operation (used), This ESSETRE TECHNO was manufactured in 2007. A CNC Wood Machining Centre featuring a Z-axis stroke of 1320 mm and a maximum electrospindle power of 12 kW at 7000 rpm. It supports tool sizes from 3 to 30 mm with a manual clamping system. Ideal for diverse woodworking applications. Contact us for more information about this machine. Laedpfx Ajxqh Uhefioh Application Types CNC Wood Machining

Year of construction: 2011, condition: ready for operation (used), This SPINNER SERVO-LOAD 80-1200 was manufactured in 2011. It features a bar feeder with a maximum rod length of 1,200 mm and a rod diameter range of 6 - 80 mm. Consider the opportunity to buy this SPINNER SERVO-LOAD 80-1200. Contact us for more information. Laodpfx Afjxqh Ubjijh Application Types Other Machine Tools

Year of construction: 2015, condition: ready for operation (used), Additional Equipment LN710 5" Servo Focus Head + LN010 5" High-Accuracy Lens (2.0 MPa) PC010 2-Pallet Changer TL322 4th Gas Line (Super High Pressure, 3 MPa) XXX001 Smart Junior (Software) with Training XXX002 Donaldson Dust Collector XXX003 Set-Up Kits This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information. Application Types Laodjxqh T Rjpfx Afioh Cutting

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 Laedexqh T Depfx Afijh This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), controller manufacturer: Fanuc 16P, empty load weight: 10,000 kg, total length: 4,425 mm, total width: 2,800 mm, total height: 1,950 mm, Turret revolver with 16 + 3 x Auto Index Holders Ljdjxqh Twopfx Afisah Punching pressure: 20 Ton Max sheet thickness by punching + nibbling: 6,4 mm Max punching dia: 88.9 mm Working range on cross-side (X-axes): 1270 / 2540 mm Working range along (Y-axes): 1000 mm Toolchanger: Yes Number of toolpositioners: 19 positions Power needed: 25 kva

Condition: ready for operation (used), - decoiler 10 ton + lift - straightener punch corner notcher unit (3+4 rollers), incl 5 hydraulic punch possibilities fixed width: 1350 mm - 12 rollforming stations with variabel width + 1 fixed width station for optical profiling distance between stations: 400 mm axle dia: 50 mm axle length: 110 mm min axle-axle: 130 mm max axle-axle: 200 mm variable opening: 300 - 1400 mm fixed width: 1350 mm Lajdpfjxqh Tqsx Afish - Van Otterloo 4 columns flying shear cutting/punching (type HVS 60.06.1260 PRM 012) - max shear capacity: 1350 mm - conveyorbelt - NN pneumatic stacker (max length 10000 mm) - controlunit - currently equipped with light rolls for undulated profiles - TOTAL LENGHT 39 meter ( with the conveyor belt)

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conical bending with hardened rolls with motorized backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm Ledpfexqh Tkox Afijah

Condition: ready for operation (used), total length: 1,850 mm, total width: 700 mm, total height: 1,200 mm, empty load weight: 520 kg, nominal power: 1.1 kW (1.50 HP), conische buiging Ljdsxqh Tdopfx Afieah Number of rolls: 3x Roll capacity cold: 1270 x 3 mm Roll dia upside: 90 mm

Condition: ready for operation (used), total length: 9,000 mm, total width: 4,300 mm, total height: 3,050 mm, empty load weight: 190,000 kg, top side rolls hydraulicaly driven 110 HP on top roll Extra top roll included, dia 660 mm Hardened rolls treated with 50-NI-CR-No 7 Clamping force: 1000 ton Conical bending Electro mechanical control Max open between rolls: 205 mm Foundation needed: 10 500 x 5300 x 2400 mm Lasdpfoxqh S Tjx Afieh Number of rolls: 4 Roll capacity cold: 3100 x 125 mm Roll capacity warm: 3100 x 180 mm Type: hydraulic Roll dia upside: 850 mm Dia under roll - side rolls: 850 mm - 720 mm Driven rolls: 3 driven rolls Power needed: 230 HP total