Fräs- und Drehmaschinen Zubehör Rainer Mörz und Holger Hagen GbR

Condition: used, Year of construction: 2016, functionality: unexamined, machine/vehicle number: 30038908, travel distance X-axis: 3,200 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 695 mm, table width: 750 mm, table load: 800 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, Equipment: chip conveyor, Tool Magazine: 50 positions Max Tool Weight: 5 kg Max Tool Length: 330 mm Max Tool Diameter: 75 mm (100 mm with adjacent pockets free) Tool Change Time (chip-to-chip): approx. 10.5 – 13.5 sec Feed Rates Rapid Feed Rate: up to 40 m/min (X, Y, Z) Drive System: Digital servo motors with ball screws Applications Suitable for machining steel, cast iron and general metal workpieces Ideal for 2D, 2.5D and 3D machining Kdjdsyv Avaepfx Ahvsi Used in machine construction, fixture building and automotive industry Coolant & Chip Handling Chip Conveyor: Integrated scraper conveyor Coolant Pump: 1 bar / 100 l/min Optional: High-pressure coolant system Construction Machine Bed: Rigid, low-vibration grey cast iron design Guide System: Linear guideways Enclosure: Fully enclosed working area with safety glass

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, table width: 3,000 mm, table length: 2,000 mm, table load: 12,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle nose: BT50, number of spindles: 32, Equipment: chip conveyor, documentation/manual, Vertical machining center Gantry Double column WELE LB-321 Year: 2020 C.N.C: HEIDENHAIN ITNC 530 Specifications Rigid tapping and helical interpolation, Gear-driven spindle head, High-pressure system: 20 bar, Column extension: 200 mm, Full enclosure, optical scales on X, Y, Z axes, Belt-type chip conveyor, Air through the spindle. Kdodpfx Ajyu S Diehvoi 90° orthogonal head for 5-face machining, Automatic tool change in vertical position, Horizontal speed: 2400 rpm, Automatic indexing every 5°, With high-pressure coolant through the head, 3D software Table dimensions: 3000x2000 mm T-slot/pitch size: 28x200x10 mm Max weight allowed: 12000 kg Capacity Longitudinal X-travel: 3060 mm Cross Y-travel: 2150 mm Vertical Z-travel: 800 mm Spindle nose: BT50 ISO Spindle speed: 10-6000 rpm. Motor power: 22-26 Kw Rapid X,Y,Z axis: 24000/24000/20000 mm/min Tool Stations: 32 no. Specific properties Distance between table surface and spindle nose: 400 – 1200 mm Distance between columns: 2300 mm Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Machine dimensions: 8365 × 4550 × 4350 mm Machine weight: 33,000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, controller manufacturer: FANUC, controller model: 0IMD, table width: 4,200 mm, table length: 1,650 mm, table load: 9,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,500 rpm, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 32, Vertical machining center gantry type. KENT BKV20-42 Year of manufacture 2015 CNC FANUC 0iMD Table Table dimensions: 4200x1650 mm T-slot/pitch size: 22x9x170 mm Max weight allowed: 9000 kg Capacity Longitudinal X-travel: 4200 mm Cross Y-travel: 2000 mm Vertical Z-travel: 900 mm Spindle nose: BT50 ISO Kdedjyu Svfopfx Ahvei Spindle speed: 30-4500 rpm. Motor power: 18.5-22 Kw Rapids X,Y,Z axis: 10000/12000/12000 mm/min Tool magazine 32 Specific properties Distance between colums: 2000 mm Distance from spindle nose to table: 40-940 +200 mm Increased heigth: 200 mm Machine dimension: 10.443x4330x4518 mm Machine weigth: 42.500 kg

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc 21i-MB, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband Kedpsyt S T Uofx Ahvsdi met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 314C19003, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Quaser UX630P — 5-Axis CNC Machining Centre, 2020 Key specifications: Kdsdpfx Asyt Ha Nehvei - Simultaneous 5-axis, B-axis ±120°, C-axis 360° continuous - Spindle: HSTec HM-15A Built-in, HSK-A63, 15,000 rpm, 51 kW, 162 Nm - Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm, 500 kg load, max. workpiece Ø630 × 540 mm - Control: Heidenhain TNC 640, incl. options DCM, Kinematics Opt, LAC, DNC (Opt. 18) - Tool magazine: 90 positions (HSK-A63) - Through-spindle coolant 20 bar, Heidenhain linear scales on all axes - Renishaw 3D workpiece probe + Blum laser tool measuring system - Schunk Vero-S zero-point clamping system - BMO robot interface installed and programmed - Year: 2020 | Original purchase price: €370,000 Approx. 150 HSK-A63 tool holders available for takeover — subject to separate negotiation. Full specifications and equipment list available in the attached PDF. Machine can be inspected in operation. Video and test run on request. Location: Ommen, Netherlands. Operating hours spindle: 4,726 hours!

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: OSP5000M-G, OKUMA MC-30VA vertical machining center, high-reliability Japanese machine. Fully operational and complete machine, in use until recently. Main features: • Brand: OKUMA • Model: MC-30VA • CNC Control: OSP5000M-G • Year: 1988 • Vertical machining center with automatic tool changer • Very robust structure, typical of Japanese machines • Complete and non-cannibalized machine The machine can be seen under power at our workshop. Ideal for: • machine shops • technical schools • export to foreign markets • general machining purposes Kodpfxeyt E H Us Ahvodi Condition: operational. Sold as is. Loading and transport at buyer's expense.

Condition: used, Year of construction: 2019, 1 piece of vertical 5-axis machining center in moving column design MAZAK SMOOTH VTC-800/30SR. Travels: X 3000 mm, Y 800 mm, Z 720 mm, max. table load 2500 kg, spindle 18,000 rpm, with milling holders SK 40 and various tools as per photos and inspection, self-disassembly. Color: grey. Year of manufacture: 2019. Condition: used. Kedpfxoyr Hrpj Ahvsdi Location of goods: Production hall / right side. Payment method: Advance payment via bank transfer. Shipping: Collection only – no shipping offered for this item!

Condition: not inspected (used), Year of construction: 1995, TOS MC100V machining centre, year 1996, equipped with Heidenhain control, currently disconnected and drained, ready for transport. Kdedpfx Aeyrz Hushvei

Condition: ready for operation (used), travel distance Z-axis: 508 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 760 mm, controller manufacturer: Mazatrol M2, total height: 2,990 mm, total length: 3,105 mm, Mazak VQC 30/50B X:1500 - Y:760 - Z:508 mm Table dimensions: 1600 x 800 x 500 mm Kedpfx Ahsyru Huevedi Max weight on the table: 1500 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 11 kW Toolchanger: 24 positions Number of rotations: 30 -> 3150 rpm

Condition: like new (used), User surplus stock E ARIAXIS i-500 AT730 30 HSK tool magazine (n/a Euchner) NP326 5-axis machining package for SmoothX MO084 Manual pulse generator (wired/detachable) NO442 B) G00 slope constant NO600 B) Cylindrical interpolation SF060 Scale feedback system X, Y & Z axis NO123 F) Tool radius compensation/5 axis SR534 Spindle speed 18,000rpm (HSK n/a Euchner) PL083 Signal tower (3 colour lights) NO091 B) Synchronised tapping MB269 RMP600 radio-type touch probe Ksdpfxeynwxfs Ahvsdi CV546 Preparation for chip conveyor (right) NO610 Work setting error compensation XXX Laser Mill Tool Measurement (NC4/ with airblast) O_2354hng Chip Conveyor, Local Manufacture (with transporter / ICON-P)

Condition: ready for operation (used), Year of construction: 2005, total height: 3,080 mm, table width: 3,275 mm, overall weight: 7,600 kg, product length (max.): 2,000 mm, This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details. • Axis Travels: • X Axis: 600 mm • Y Axis: 425 mm + CUA stroke 75 mm • Z Axis: 450 mm • A Axis Rotation: 360° • B Axis Rotation: −20° / +110° • Distance between table and spindle nose: 65 – 515 mm • Table Diameter: Ø 350 mm • Maximum Workpiece Weight: 200 kg • Table Turning Speed: 30 – 1500 rpm Kdedpfxoynhy Hs Ahvoi • Tool Magazine Capacity: 50 tools • Maximum Tool Diameter (with adjacent tools): Ø 90 mm • Maximum Tool Diameter (without adjacent tools): Ø 125 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 8 kg • Rapid Traverse X–Y–Z: 45000 mm/min

Condition: ready for operation (used), Year of construction: 2016, total height: 3,600 mm, overall weight: 21,500 kg, spindle speed (max.): 24,000 rpm, product length (max.): 4,814 mm, number of axes: 5, This 5-axis RÖDERS RXU 1001 DSH was manufactured in 2016. It features a machining range of 800 mm × 855 mm × 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle that operates at 24,000 rpm and includes a tool changer for 24 tools. If you are looking to get high-quality machining capabilities, consider the RÖDERS RXU 1001 DSH vertical machining centre we have for sale. Contact us for further details. • Machining range: 800 mm × 855 mm × 500 mm • Swivelling range (A-axis): ±115° • Rotation range (C-axis): almost unlimited • Table size: 400 mm round or 400 mm square, 600 mm round with two flattened sides Kedsymnvfspfx Ahvedi • Max. workpiece weight: 800 kg • Feed rate: 0–60,000 mm/min • Milling spindle (standard): 67 Nm (S1), HSK A63, max. tool diameter 35 mm • Tool changer (standard): 24 tools (rotary – can be loaded during machining) • Tool changer (optional, integrated): 40+ tools (chain changer – can be loaded during machining) • Integrated measuring laser • Chip disposal (standard): 2 screws into chip box behind the machine Additional equipment • Optional chip conveyor

Condition: good (used), Year of construction: 2004, Parts shown by hand not come. Kdjdpfjylykxox Ahvei

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,284 h, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis FANUC ROBODRILL α-D14MiB5 was manufactured in 2020. It features a spindle speed of 10,000 rpm and a 100 mm column extension. The machine includes a rotary table DDR260iB and a Renishaw OMP40 3D spindle probe for enhanced precision. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D14MiB5 vertical machining centre we have for sale. Contact us for further details. • Big Plus spindle interface • 100 mm column extension • Machine roof • Electrical requirements: 3-phase, 10 kVA, 200–220 V AC, 50/60 Hz, SCCR 2.5 kA Additional equipment • Rotary table FANUC DDR260iB with face plate • Special setup: DDR 4th axis horizontal • Lang Quick-Point round plate 96 adapted for FANUC DDR/DTT • Renishaw OMP40 3D spindle probe with OMI-2T receiver • Häberle coolant tank HK250 (250 l capacity) • External coolant pump 220 l/min with flow monitoring • Manual band filter Kdedpoylw Hdofx Ahvei • Chip tray with perforated plate • Commissioning of Häberle machine and coolant system included

Condition: ready for operation (used), Year of construction: 2008, This 3-axis HAAS VF-9/40HE vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, Y-axis travel of 1,016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 2,134 × 914 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-9/40HE machine we have for sale. Contact us for further details. • Travels • Spindle nose to table: 102–864 mm • Table • Size: 2,134 × 914 mm • T-slot width: 15.9 mm • T-slot center distance: 125 mm • Feedrates • Rapid traverse (X): 15.2 m/min • Rapid traverse (Y, Z): 15.2 m/min • Max cutting feed: 12.7 m/min • Spindle • Max torque: 102 Nm @ 1,400 rpm • Bearings: ABEC Class 7 • Electronic spindle orientation • Tool changer • Capacity: 24+1 standard (40+1 optional) Kdsdpsylnpvjfx Ahvei • Tool type: CT40 standard / BT optional • Max tool diameter: 76 mm (all pockets filled); 152 mm (adjacent pockets empty) • Max tool length: — • Type: Electromechanical, cam-driven • Tool-to-tool: 2.8 s • Chip-to-chip: 3.6 s • Machine requirements • Power requirement: 14 kVA • Voltage: 200–250 VAC, 3-phase, 50–60 Hz • Air required: 113 L/min at 6.9 bar • Enclosure • Full steel enclosure

Condition: ready for operation (used), Year of construction: 2011, operating hours: 6,600 h, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3s HAAS VF-6SS vertical machining centre was manufactured in 2011. It features a SK40 / DIN 69871 spindle with a maximum speed of 12000 rpm and a 24-tool automatic tool changer. Additionally, it includes HSM and Look Ahead capabilities, along with a Renishaw probe and toolsetter. Consider the opportunity to buy this HAAS VF-6SS vertical machining centre. Contact us for further details. • ATC capacity: 24 tools • Control options: HSM (High-Speed Machining) with Look-Ahead Kdjdpjyk Dghsfx Ahvsi Additional equipment • Renishaw workpiece probe • Renishaw tool setter/tool measurement system Technical Specification Taper Size SK 40

Condition: new, Year of construction: 2026, functionality: fully functional, Working range in X – Y – Z mm: 4,200 x 2,200 mm • Continuous worktable • Lateral and rear reference stops • Gantry-type machine with Gantry system – Dual drive • Milling unit with 4-axis electrospindle, brand HSD • Saw unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software • Easy programming • File import capability • Remote control panel/remote console • Teleservice and video diagnosis: real-time solution • Automatic guide lubrication • Lateral safety guards for the unit Kdodpjyk Acnjfx Ahvsi

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Kodpfx Ahoykqtzjvjdi Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, controller manufacturer: HEIDENHAIN, controller model: TNC 530, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Kdedsyir Dxjpfx Ahvoi Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled

Condition: excellent (used), Year of construction: 2013, Available end of July. Technology Inline direct drive Kodpfeyimncsx Ahvjdi Speed 12,000 rpm Power 22 kW Tool holder SK40 Tool changer SMTC, 41 positions Technology 2 axes, with counter bearing B-axis -35° / +110° C-axis 360° Clamping surface ø630 x 500 mm Table load (max.) 300 kg Cooling Standard coolant including P-Cool and through-spindle cooling (TSC) Renishaw probe WIPS system with touch probe and tool measurement 8M functions Rotating and scaling 16MB memory storage HSM high speed milling Rigid tapping Machine cycle time: 5,446 h Machine power-on time: 21,246 h

Condition: used, Year of construction: 2013, operating hours: 7,283 h, functionality: fully functional, travel distance X-axis: 7,210 mm, travel distance Y-axis: 698 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 150 mm, rotational speed (min.): 20,000 rpm, overall weight: 3,870 kg, operating hours of spindle: 923 h, spindle motor power: 7,500 W, spindle mount: MK 1, number of spindles: 1, number of slots in tool magazine: 8, mount diameter: 31 mm, tool length: 150 mm, tool diameter: 150 mm, tool weight: 3,000 g, type of input current: AC, Equipment: rotational speed infinitely variable, We are selling a Mecal machining/milling machine that can be used to process, mill, and drill aluminium profiles. The machine was purchased from the company Pressta-Eisele. Kodpeyhdgpefx Ahvodi

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,440 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 274 mm, travel distance Z-axis: 390 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 3,000 mm, feed length Y-axis: 274 mm, feed length Z-axis: 390 mm, rotational speed (max.): 20,000 rpm, overall weight: 1,700 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 1,621 h, spindle motor power: 4,000 W, number of slots in tool magazine: 9, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, We offer this ready for use Emmegi PHANTOMATIC M3 vertical machining center, year of construction 2020. Manufacturer: Emmegi Model: PHANTOMATIC M3 Serial number: C124963 Year of manufacture: 2020 Weight: 1700 kg Pneumatic operating pressure: 6-8 bar Motor power: 6.5 kW Current: 9.4 A Voltage: 400/3 V Kedpfxoygtcks Ahvedi Frequency: 50 Hz Machining center with less than 1700 spindle hours! TECHNICAL DETAILS Travel distances X-axis (longitudinal): 3,000 mm Y-axis (transverse): 274 mm Z-axis (vertical): 390 mm Automatic positioning: -90° | 0 | +90° Positioning speed X-axis: 56 m/min Y-axis: 22 m/min Z-axis: 22 m/min Spindle Maximum power in S1: 4 kW Maximum speed: 20,000 rpm Tool holder: HSK-50F Tool stations: 9 MACHINE DETAILS Weight: 1,700 kg Operating hours Spindle hours: 1,621 h Operating hours: 3,440 h EQUIPMENT - Cutter head, 80mm -Collets 5mm: 1 pc 9mm: 1 pc 2.5mm: 1 pc 8mm: 3 pcs 16mm: 1 pc 10mm: 3 pcs 7mm: 1 pc 12mm: 1 pc 6-5mm: 2 pcs 4mm: 1 pc If you have any questions or need more information, feel free to send us a message or give us a call. Buy it in March and we will give you an extra discount on the price of the machine!!!

Condition: good (used), Year of construction: 2010, functionality: fully functional, X 3,200mm, Y 2,100mm, Z 920mm, ATC 40 pos, BT50 10,000Rpm. weight ca 35.000kg, delivery April 2026 Kdsdpfeyglbxjx Ahvsi

Condition: used, Year of construction: 2007, Main data - X travel (table longitudinal travel): 1050 mm - Y travel (table transverse travel): 530 mm - Z travel (spindle vertical travel): 510 mm Spindle - Spindle motor: AC 18.5 kW (5 min rating) - Rapid traverse X / Y / Z: 36 / 36 / 36 m/min - Tool magazine: 30 stations - Spindle taper: ISO 40 - Spindle bearings: Ø 70 / 110 mm - Speed range: 12,000 rpm - Number of speed ranges: Direct drive - Max torque: 95.5 Nm X-axis - X travel (table longitudinal travel): 1050 mm - Guides: Linear ball guides Y-axis - Y travel (table transverse travel): 530 mm - Rapid feed: 36 m/min - Working feed rate: 1 – 36,000 mm/min - Guides: Linear ball guides Z-axis - Z travel (spindle vertical travel): 510 mm - Spindle nose to table top distance: 150 – 660 mm - Distance from column to spindle center: 576 mm Kjdoygipgopfx Ahvjdi

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,612 h, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information. Kdodpfx Aeyfu Uxohvsi