Fa. Deutsch Autohandel Gesmbh

Condition: used, axle configuration: 3 axles, first registration: 05/2026, total width: 2,550 mm, total height: 880 mm, suspension: air, tire size: 245/70R17.5, color: grey, Year of construction: 2026, Equipment: ABS,

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Gsdpoy Sniwjfx Ankjub Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Gsdpfx Anoy Sniqskoub Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: good (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR Godpsy Snikefx Ankoub span range max.: 400 mm span range min.: 50mm steady rest width: 170 mm steady rest height: 730 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, table diameter: 4.000 mm swing diameter: 4.500 mm turning height: 1.600 mm Cross-section of tool slide: 250 x 250 mm power capacity: 1 x 100 kW max. rotational speed: 140 min/1 max. table load: 50 t Gjdpfxsy Snido Ankeub 2 pieces of tool changers 40 slots per tool changer

Condition: good (used), mileage: 42,600 km, power: 96 kW (130.52 HP), first registration: 03/2020, fuel type: diesel, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,420 mm, total width: 2,100 mm, total height: 2,350 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 43,800 mm, loading space width: 21,400 mm, loading space height: 21,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, tail-lift, = Additional Options and Equipment = - Passenger bench seat - Euro 6 - Driver airbag - Remote central locking - Wooden loading platform - Wooden slat lining - Height-adjustable driver’s seat - Height-adjustable steering wheel - Front center armrest - Side door - Immobilizer - Applied advertising decals - Partition wall with window = Further Information = General Information Number of doors: 2 Cab type: single Registration number: VFL-34-Z Godpfjy Snhyjx Ankeub Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Weights Unladen weight: 2,126 kg Payload: 1,374 kg Gross vehicle weight: 3,500 kg Functional Tail lift: D'HOLLANDIA DHLM.08, tailgate, 750 kg Load platform height: 90 cm Tipper: Rear Maintenance, History and Condition APK (Technical inspection): valid until 03.2027 Technical condition: good Visual condition: good

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Guodpfjy Snhgsx Ankob Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), mileage: 254,900 km, power: 79 kW (107.41 HP), first registration: 01/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,690 mm, total width: 2,210 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2020, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Equipment = - Passenger bench seat - Roof spoiler - Euro 6 - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - LED daytime running lights - Front center armrest - Immobilizer - Advertising decals (applied) - Partition wall with window = Further Information = General Information Number of doors: 2 Cab type: single Gjdjy Snhaopfx Ankjub License plate: VPK-05-V Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: RENAULT, 6-speed, manual Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Weights Unladen weight: 2,440 kg Payload: 1,060 kg Gross vehicle weight (GVW): 3,500 kg Functional Tail lift: D'HOLLANDIA, rear tailgate, 750 kg Fuel Consumption Average fuel consumption: 7.3 l/100km Urban fuel consumption: 7.1 l/100km Extra-urban fuel consumption: 7.4 l/100km Maintenance, History, and Condition APK (Technical Inspection): valid until 01/2027 Technical condition: good Optical condition: good

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, working width: 1,500 mm, empty load weight: 340 kg, loading space height: 960 mm, as-new silage grab Saphir DSZ 15 1200 litres Gedpfx Ajy Snc Ronksub Subject to prior sale – all information provided is non-binding. The accuracy and freedom from errors of the details given here are not guaranteed. Warranty and/or liability are excluded. Despite our own checks, deviations from the above description cannot be ruled out. Please note that the subject of any purchase agreement concluded will be solely the vehicle in its actual condition.

Year of construction: 2002, condition: ready for operation (used), Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible. Gujdpfxey Sncwe Anksb

Year of construction: 1999, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Godpfx Aoy Sncqjnkeub

Year of construction: 2003, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, mold installation height: 190-660mm, clear distance between the tie bars: 540x540mm, max. mold installation height: 378x378mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Gedpfx Aney Snckjkjub

Condition: ready for operation (used), Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible. Gjdpfjy Sncdjx Ankoub

Condition: ready for operation (used), Year of construction: 1999, Hopper capacity: 300l, perforated disc diameter: 130mm, throughput capacity: 3500kg/h, connected load: 22kW, length: 2850mm, width: 1500mm, height: 3050mm, weight: 980kg, weight with loading: 1300kg. An inspection on site is possible. Gusdpfxsy Snb To Ankob

Year of construction: 2008, condition: ready for operation (used), Number of axes: 2, control: Mitsubishi MSX840 III (MAPPS update 2025), operating hours: 9,581h, machining time: 7,541h, power on time: 58,566h. Equipment: C-axis, 12-station tool turret, increased drive power 30/25kW instead of 22/18.5kW, driven tools, rotating quill, chip conveyor, hinged belt, discharge on the right side, 1x double foot switch for chuck, tool length measuring devices, high-pressure coolant system 635/1040W, signal light, transformer. Without work area extraction, piping and side energy box. Machine is fully functional, an inspection on site is possible. Gjdpfxsy Snb Ho Ankoub

Year of construction: 2007, condition: ready for operation (used), Number of axes: 2, control: Mitsubishi MSX840 III (MAPPS update 2025), operating hours: 25,824h, machining time: 19,442h, power on: 61,066h. Features: 12-station tool turret, sub-spindle/counter spindle with chuck, driven tools, chip conveyor with hinged belt and discharge on the right side, two double foot switches for chuck, second foot switch for sub-spindle, two tool length measuring devices, 2nd measuring arm for counter tools, high-pressure coolant system 635/1040W, signal light, transformer. Without work area extraction, piping and side energy box. Machine is fully functional, an inspection on site is possible. Gjdpfsy Snbyox Ankjub

Year of construction: 2005, condition: ready for operation (used), Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible. Guedpfxjy Snbts Ankob

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Guedpfx Aney Snbmskeb Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: good (used), machine/vehicle number: QUO-0064-24-0141, Offer 26134 Technical Specifications: - Pressing force: 160 t - Working width: 3,080 mm Gjdpfx Ansy Snavjkeub - Distance between uprights: 2,550 mm - Throat depth: 250 mm - Installation height: 400 mm - Rapid approach speed: 100 mm/sec - Working speed: 7 mm/sec - Return speed: 70 mm/sec - Ram stroke: 160 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3,850 x H 2,850 x D 1,800 mm - Weight: approx. 7,800 kg Includes: - Swivel arm with CYBELEC DNC 60 control panel - Motorized backgauge up to 625 mm - Crowning device - Laser safety system - 4-way segmented universal die, segmented V-dies - Segmented punch tooling, etc. - Two-hand operation console, foot pedal - Separate mobile tool cabinet

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Gedpfjy Snapsx Ankoub Ausstattung: .Kernzug -Roboter

Condition: good (used), Year of construction: 2001, turning length: 1,020 mm, turning diameter: 540 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 565 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,077 mm, overall weight: 12,500 kg, 🛠️ Description For sale is a powerful CNC turning and milling center, MORI SEIKI MT 2000SZ, equipped with sub-spindle and Y-axis. Gujdpfx Ajy Sm U Senkjb ⚙️ Technical Data Travel X / Y / Z: approx. 565 / 160 / 1,077 mm Max. turning diameter: approx. 540 mm Max. turning length: approx. 1,020 mm Main spindle: up to approx. 4,500 rpm Tool spindle: up to approx. 8,000 rpm Tool holder: Capto C6 Tool stations: depending on configuration Axes: X, Y, Z, C + sub-spindle ⏱️ Operating Hours Spindle: Operating hours: approx. 33,600 h Machining time: approx. 14,200 h Sub-spindle: Operating hours: approx. 18,100 h Machining time: approx. 11,500 h (For additional specifications, see images) 📦 Features Sub-spindle (SZ version) Driven tools Y-axis Chip conveyor Coolant system Multitasking capability (turning & milling) 📌 Condition The machine is in used, fully functional condition. Tool holders (turning tools and Capto) are included in the delivery. Cutting inserts are not included. 🚛 Delivery & Terms Sale ex location / loaded free on truck Dismantling and loading can be arranged on request Sale without guarantee or warranty 📞 Contact If interested or for further information, please do not hesitate to contact us.

Condition: used, axle configuration: 3 axles, first registration: 07/2024, total length: 13,610 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R22.5, wheelbase: 9,460 mm, color: blue, Year of construction: 2024, Dutch registration SAF axles Friction-steered self-tracking axle Remote-controlled reversing Hydraulic wideners Wide marker boards Stainless steel toolboxes Toolbox on the gooseneck Spare wheel = Further Information = Gjdpfey Sm Thjx Ankeub Axle configuration Tyre size: 245/70R22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Centre axle: Twin tyres; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Rear axle: Twin tyres; steered; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Weights Unladen weight: 9,580 kg Payload: 41,420 kg Gross Vehicle Weight (GVW): 51,000 kg Maintenance APK (Dutch periodic technical inspection): valid until 07/2026 Identification Type number: 3ASD-3A / 1x lift axle / 2x electric = Company Information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We do our best to provide correct information, however, no rights can be derived from the texts provided.

Condition: new, functionality: fully functional, TECNOMAC PCO 3013 HOT HYDRAULIC PRESS BRAND NEW MACHINE – V380/50 – “CE” Gedpfx Ajy Sm S Ronksub Table size: 3000 x 1300 mm SOLID PERFORATED STEEL PLATENS Aluminium platen covering Platen heating with diathermic oil Oil boiler: 27 kW Number of pistons: 6 Ø 100 mm Total pressure: 120 TON

Condition: excellent (used), Year of construction: 2011, operating hours: 1,950 h, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 750 mm, bale height: 1,100 mm, bale weight: 550 kg, Equipment: documentation/manual, Automatic baler HSM VK 4812 The machine is maintained in perfect condition. The total operating hours are only 1950, and it has processed just 1314 bales of material. The machine was regularly serviced and has operated indoors in a warehouse since new. The baler has worked almost exclusively with non-abrasive material – textile offcuts. Key advantages of the unit: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle time → ideal for use with conveyor lines - Significantly superior to the 15–22 kW version when processing a high material stream Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressing force: 58.2 N/cm² Volumetric throughput: up to 332 m³/h Practical weight throughput: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical (maximum) throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Filling opening: approx. 1020 × 1250 mm Gjdpfxey Sm Sqe Anksub We also have other balers in stock. Transport costs depend on weight, volume, and most importantly, distance. When making inquiries, please provide the following details: Delivery address (postal code and town/city name). For further details and transport options please contact us by phone, as additional arrangements require direct contact. Our contact details are available in the seller's legal information. We sell and export worldwide; thanks to our extensive warehouse capacity, we can flexibly and quickly supply larger quantities as well. We issue intra-community invoices – VAT-free. Opening hours: Mon–Fri: 08:00–16:00 Sat: closed

Condition: good (used), Year of construction: 2018, load capacity: 4,000 kg, fuel type: electric, mast type: triplex, just arrived Godpfxoy Sm Sko Ankjub info to follow